CA NO GE/C-30/2021-22 REPAIR/REPLACEMENT OF UNSV PARTS OF LT PANEL INCLUDING SUB MAIN WIRING DB AT DK-I AND DK-II OFFRS MD ACCN INTERNAL PERIODICAL ALONGWITH MISC B/R WORK AND (B/R) PETTY REPAIRS FOR DAILY WORKS AT ZONE A IN THE AREA OF AGE B/R-

Amount

Taking down carefully unserviceable LT panel including disconnecting of incoming and outgoing connections complete all as specified and directed by Engineer-in-Charge.

Taking down carefully unserviceable distribution boards including disconnecting of incoming and outgoing connections complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB SPN 40 to 63 Amp Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Supply and fix MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

Taking down old unservicable submainwiring 1.5 Sqmm to 10 Sqmm size (3 run length per mtr shall be applicable for measurement under this item) complete all as specified and directed by Engineer in charge

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge

S&F factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sub main wiring complete with two runs of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 1 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including non metallic conduit in walls complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including non metallic conduit in walls complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including non metallic conduit in walls complete all as specified and directed by Engineer-in-Charge.

Supply and fix Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including non metallic conduit in walls complete all as specified and directed by Engineer-in-Charge.

S&F blank plate of suitable size for open space in distribution boards complete all as specified and directed by Engineer-in-Charge.

M&L providing protection pipe PVC or flexible pipe as reqd at site to out going cables, cleaning of LT panel boards with air blower cleaning inside, dressing in proper alignment, replacement of rusted iron parts with new one with suitable size of angles/strips tightening of fixing bolts and nuts, providing thimbles to whole bunch of wires uniformly clean manner etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in replacement of 45W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCCB 125 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 10/20 A capacity complete all as specified and directed by Engineer in charge.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in two storey bldg complete all as specified and directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling complete all as specified and directed by Engineer-in-Charge.

M & L for applying two coats of cement base paint over one coat of putty on newly plastered surfaces(external) of walls including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of wallscomplete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white lime wash complete all as specified and directed by Engineer-in-Charge.

complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat of oil bond destember over one coat of wall care putty on old plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge.

complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat cement base paint on old plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge.

M&L preparing old decorated surfaces of ceiling and applying two coats of white lime washcomplete all as specified and directed by Engineer-in-Charge.

M&L preparing old decorated surfaces of wall and applying two coats of white lime wash complete all as specified and directed by Engineer-in-Charge.

complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coats of weather proofing exterior acrylic emulsion paint of DULUX Weather shield Max or APEX ULTIMA from Asian paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Note:- contractor submit @10% guarantee money of cost of schedule items for the period of 5 years.

M & L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge..

M & L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge..

M&L in repair 3mm thick sheet glass n exc 0.5 sqm each pane ordinary quality and glazing withoil putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.

S & F in repair Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets complete all as specified and directed by Engineer-in-Charge.

S & F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought fo glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs angle valve 15mm dia fancy type chromium plated complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F for snap grid ceiling with E- bord(decorative) ceiling tiles of 600x600mm and 4mm thick incl aluminium alloy anodised at edges 25x25x1.5mm and tee section 38x38x1.5mm at other then edges both ways fixed with 4mm dia GI wire complete all as specified and directed by Engineer-in-Charge.

Dismantling of corrugated AC sheet (corrugated or semi corrugated) fixed in roof including ridges complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc complete all as specified and directed by Engineer-in-Charge..

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks, roof truss and similar work incl welding and drilling con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S & F 0.56 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge.

Checking the leakage and petty repairs/replacement to Wall Mixer, WHB Mixer, Sink Mixer, bib taps, Pillar taps, Stop cock, Conceled stop cock, angle valves, gate valves etc of any description or size for stopping leakage of water by changing washers, etc complete all as specified and directed by Engineer-in-Charge. Note:- for Ser No 53 to 60: 1. Note : Fixtures/Fittings required to complete the job shall be paid under relevant item against supply only and rates quoted by the contractor are deemed to inclusive of necessary tools and plants incl mtrls of Dhaga/ safeda/M seal/Taflon tape/solvent/ screws/white cement/Nails,Screws/Gitties etc. 2. The complaints to be rectified within four hours on same day. The Delay in rectification of complaint more than four hours, the penality will be levied @ Rs.100.00 Per complaint. 3. Serally numbered docket booklet shall be provided by contractor without any extra cost. 4. In case of any urgent nature plumbing complete after 1700 hrs same shall also be attended to and nothing extra shall be admisible on this account.

Repairs to low level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works of to make the flushing cistern functional complete all as specified and directed by Engineer-in-Charge.

Removal of air lock, blockage of water pipes from OHT tanks to supply point and repairs/adjustment to float valves, applying of M-seal in tanks and all other connected works of water supply from Over head water storage tanks / PVC tanks complete all as specified and directed by Engineer-in-Charge.

Repairs to 50mm/75mm/100mm PVC or CI Pipes, Branch pieces, Tee Junction, Sockets, Door plates, floor traps, Nahani traps, EWC lip ring half S set incl all fittings to make the pipe functional complete all as specified and directed by Engineer-in-Charge.

Petty repairs to joinerys works, such as easing/adjusting of door, repairs of wire mesh, cub board shutters, iron mongerys, false ceiling works of any type or description and any type of carpentery works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening , tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc complete all as specified and directed by Engineer-in-Charge.

Petty repairs to joinerys works, such as replacement refixing of glass panes, wiremesh, glass putty, aluminium beading, door closure, any type of handles, Tower bolts, hinges, sliding bolts, rubber beading, door seal, piano hinges,floor door stopper, etc complete all as specified and directed by Engineer-in-Charge..

M&L petty repairs to plaster, floor, plinth etc and like by PCC 1:2:4 Type B0 and plaster in CM 1:4 incl preparing roungening and cleaning the surface, and neat cement slurry as required making good, finishing even and smooth without using extra cement in patches area n exc 0.50 Sqm each patch and removal of rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L petty repairs to wall tiles, floor tiles, skirting, dado, kota stone , granite stone, RCC Jali, window cill, door jambs, ceiling plaster, fixing of EWC and IWC and neat cement slurry as required making good, finishing even and smooth without using extra cement in patches area n exc 1.00 Sqm each patch plaster, floor, plinth etc and like by PCC 1:2:4 Type B0 and plaster in CM 1:4 incl preparing roungening and cleaning the surface, and removal of rubbish off the premises complete all as specified and directed by Engineer-in-Charge..

Supply only Sheet glass, 3mm thick ordinary quality, in squares n exc 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc complerte all as specified and directed by Engineer-in-Charge.

Supply only Stainless steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapple etc on 2nd class HW wooden/ fillets (15mmx15mm) duly painted with synthetic enamel paint complerte all as specified and directed by Engineer-in-Charge.

Supply only two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge.

Supply only 250mm long aluminum alloy anodised sliding door boll with hasp staple balt-type and fixing clips of sheet case or extruded sections and fixing bolls and sliding bolls extruded sections or case aluminum alloy complerte all as specified and directed by Engineer-in-Charge.

Supply only 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complerte all as specified and directed by Engineer-in-Charge.

Supply only 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complerte all as specified and directed by Engineer-in-Charge.

Supply only Stainless steel drapery rod 20 mm of dia ,with bracket including premium balls complerte all as specified and directed by Engineer-in-Charge.

M & L for Welding in repairs n. exc 2.5cm in length Thickness of Metal to be welded is not exc 6mm thick complerte all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china squatting pan Orissa pattern long pan size 580mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet complete all as specified and directed by Engr-in-Charge,

Supply only 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complerte all as specified and directed by Engineer-in-Charge.

Supply only PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC/IWC complerte all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complerte all as specified and directed by Engineer-in-Charge.

Supply only plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complerte all as specified and directed by Engineer-in-Charge.

Supply only stainless steel toilet paper holder with gutties and steel screws on walls complerte all as specified and directed by Engineer-in-Charge.

Supply only stop valve cast copper alloy screwed down high pressure with cruch or butterfly handle screwed both ends for iron pipe or for union and fixed for 15 mm bore complerte all as specified and directed by Engineer-in-Charge.

Supply only angle valve 15mm dia fancy type chromium plated all as specified and directed by the Engr-n-charge

Supply only suitable for 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complerte all as specified and directed by Engineer-in-Charge.

Supply only 15 mm dia Brass CP 3-in-1 wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Supply only 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Supply only bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

Supply only stainless steel soap dish complerte all as specified and directed by Engineer-in-Charge.

Supply only CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complerte all as specified and directed by Engineer-in-Charge.

Supply only brass spindle/phase suitable for 15mm dia bib cock, stop cock, conceled stop cock, angle cock, wall mixture, basin mixture etc of any type or size complerte all as specified and directed by Engineer-in-Charge.

Supply only Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

Supply only 32mm bore and 75cm long PVC waste pipe for WHB complerte all as specified and directed by Engineer-in-Charge.

Supply only PVC connection pipe of 15mm X 600mm " size with 2 Nos brass check nuts with washers,complerte all as specified and directed by Engineer-in-Charge.

Supply only fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complerte all as specified and directed by Engineer-in-Charge.

Supply only Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

Supply only Glass shelf assembly5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

Supply only of 15mm bore size PTMT bib tap complerte all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Supply only chromium plated grating (round) 125mm dia fixed over floor/nahani trap (with hole and without hole) complerte all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with 20mm dia brass float valve including taking out existing unserviceable overhead tank of any description complerte all as specified and directed by Engineer-in-Charge.

Supply only 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

M & L for Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured) complerte all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks of 500& 1000 litres capacity and from mouths of circulating pipes, etc and applying bleaching powder for cleaning on tanks complerte all as specified and directed by Engineer-in-Charge.

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends complete all as specified and directed by Engineer-in-Charge..

Supply only 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, waste and vent pipes in any length with or without ears, fixed in walls/floors/ trenches etc complerte all as specified and directed by Engineer-in-Charge.

Supply only 100mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complerte all as specified and directed by Engineer-in-Charge.

Supply only 75mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complerte all as specified and directed by Engineer-in-Charge.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed by Engineer-in-Charge.

M&L for glazed coloured ceramic tiles (300x600mm) x6 to 7mm thick in dado etc set and jointed in neat cement slurry and pointed in coloured cement to match incl 10mm thick backing coat in cm 1: 4 complerte all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles (300x300mm) x6 to 7mm thick in floor etc set and jointed n neat cement slurry and pointed in coloured cement to match incl 15mm thick secreeding in CM 1 : 6 complerte all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast cement concrete inter locking paver block any shap and size ,60 mm thick M-35 grade , confirming to IS 15658-2006, over 75mm tkick PCC type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by Engineer-in-Charge.

S&F Cequered cement concrete tiles with grey cement and pigment 30cm X30cm X22mm thick set jointed and pointed in neat cement slurry in floors and including 75mm thick cement concrete type D-2 1:4:8 and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar of any position or description complerte all as specified and directed by Engineer-in-Charge.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete as in roof slabs, chajjas, fins, facia, parapet, drops, railings, beam, lentils, cover slabs, and similar other works as directed including cutting of steel reinforcement to facilitate dismantling complerte all as specified and directed by Engineer-in-Charge..

Material and labour for precast RCC 1:2:4 type B-0 45mm thick (measured solid) as in louvers, jallies including set in CM 1:6 complete including demolition of existing jallies all as specified. and directed at varying height from G.F. to G+8 Floor complerte all as specified and directed by Engineer-in-Charge..

Supply only 15 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed by Engineer-in-Charge.

Supply only 20 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed by Engineer-in-Charge.

Supply only PTMT waste coupling 32mm dia for sink complete all as specified and directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs.121750.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.