CA NO GE S U 71 2022 23 PROVN OF SEPTIC TANK SOAKAGE WELL COMPOUND WALL TOILET BATHROOM GEYSERS LIGHTNING PROTECTION VERTICAL AIR TERMINAL NETWORK ADDN ALTN TO BLDG NO NP 14 AND DEMOLITION OF CERTAIN BLDGS UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, & not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard rock complete all as specified and as directed.

Excavating over area, exceeding 1.5 deep and getting out in any type of soil/rock complete all as specified and as directed.

PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and as directed.

Removing excavated material (soils) exceeding 250 m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete including necessary form work complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix columns, pillars, piers,posts and struts including necessary form work complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span including necessary form work all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and as directed.

Reinforced cement concrete M-25 (20mm graded crushed stone aggregates) design mix as in chajjas including necessary form work complete all as specified and as directed.

M&L pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete of frame size 125mm x 60mm including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete of frame size 105mm x 60mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

M&L factory made, 2nd class hard wood 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

All as per Item No 17 above but glazed and skeleton shutter with sash bar for glass/wire gauge complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses stone measonary in cement mortar 1:4 complete all as specified and as directed.

Mild Steel TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed.(WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 05 mm thick in CM 1:4 on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10 mm thick as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for two coats of weather proof exterior emulsion paint over a coat of primer including preparation of new/old plastered surfaces of any description complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and as directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed.

S&F Steel Window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No 39 as above here in before but without glazing bar complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild Steel ventilators (box type) factory made with top hung shutters and bottom fixed type shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed.

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290.Gde-E-165 quality A including one shop coat of zinc chromate primer paint preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

4 mm thick glass sheet of ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening complete all as specified and as directed.

Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloured PVC sheet on back face complete all as specified and as directed.

S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

S&F aluminum handles cast type, anodised, 100 mm size complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild Steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed.

Mild Steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Rendering 10 mm thick in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specified and as directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

1000 ltrs capacity Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia, Ball brass, high pressure, with polythene float and flynut and 20mm Gun Metal, globe or gate valves complete screwed for iron pipes or brass ferrule and fixed etc complete all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and as directed.

10 litres Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply Only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F for stop valve (concealed type), cast copper alloy fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixedcomplete all as specified and as directed.

S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.

100mm dia cast iron sanitary connection pipe upto 300mm length complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

75mm bore Cast iron cowls complete all as specified and as directed.

Cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

S&F Shower rose 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and as directed.

M&L for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor, complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

PCC 1:2:4 type B1 (using 20 mm graded aggregate) in surafce channel and drains complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-1(20mm graded aggregate) as in coping etc including necessary form work complete all as specified and as directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding 15 cm but not exceeding 40 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc complete all as specified and as directed.

M&L Hard core of broken stone or boulders of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface complete all as specified and as directed.

75mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundations filling and mass concrete complete all as specified and as directed.

Sand cushioning under floors including watering and consolidation complete all as specified and as directed.

M&L for 60mm, M-40 grade thick, machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006,with topping of cement mixed with grey cement and with pigment. Colour and shape shall be approved by GE complete all as specified and as directed. (Make: ULTRA/MODERN/RUCHI/ISI Marked as approved by GE).

M&L for 60mm thick machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-40 grade, with topping of cement mixed without pigment. Colour and shape shall be approved by GE complete all as specified and as directed. (Make: ULTRA/MODERN/RUCHI/ISI Marked as approved by GE).

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneelers apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles, 1:2:4 mix type B-0 complete all as specified and as directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided etc. complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Framed work as in doors or gates of angle or tubular section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepered for hanging or sliding with or including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including locking arrangment complete all as specified and as directed. Fe 410 - (Gde- E- 250)

Mild Steel, plain, black sheet 1.60mm thick in door shutter, wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as requiredl complete all as specified and as directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete including locking arrangment complete all as specified and as directed.

Galvanised Mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified and as directed.

Preparation of old surfaces, plastered or unplastered of wall (including facia) and applying two coats of weather proof exterior emulsion paint (apex) painting on walls complete all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface of cement base paint and applying two coats of cement base paint on walls complete all as specified and as directed.

Two coat of Oil bound distemper including a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface and applying two coats of Oil Bond distemper on walls complete all as specified and as directed.

Preparation Old surfaces including complete Removal of existing surface of white wash and applying two coats of white wash on ceiling complete all as specified and as directed.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing etccomplete all as specified and as directed.

Machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing etc complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius for 110mm bore pipe complete all as specified and as directed.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc including necessary form work complete all as specified and as directed.

Mild Steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

200 mm bore Reinforced concrete pipes,class NP2,laid and jointed complete with coller complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipes complete all as specified and as directed. (Note- thickness of bed below the barrel of pipes 15 cm and width of bed : Outer diameter of drain pipes (not of sockets/collars) plus 30 cm all as specified and as directed.

150mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes complete all as specified and as directed.

Providing Precast cement concrete louvers and jallies, 50mm thick (measured solid) including all mouldings set in cement mortar 1:6 type B0 1:2:4 (using 12.5 mm graded stone aggregate) including necessary form work complete all as specified and as directed.

Providing reinforced cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as coping and the like, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

Taking down Chowkats or fames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm including cutting holes for taking out hold fasts or distmantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complte all as specified and as directed.

Taking down Chowkats or fames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each including cutting holes for taking out hold fasts or distmantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complte all as specified and as directed.

Taking up or down steel tubing with connection for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and as directed.

All as per Item No 118 but 20 mm bore pipe complete all as specified and as directed.

Dismantling water taks and removing to store (Exceeding 250 & not exceeding 500 Ltr) complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removal of rubbish off the premises exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in columns and removal of rubbish off the premises exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed.

Point wiring for for 3 Pin 16 Amps socket outlet independent board 2.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed.. Make: Havells/ Legrand/Indoasian Elvira

S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with MCB and indicator of complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead including taking down old sub main wire complete all as specified and as directed. Make:Havells/polycab/Finolex

S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificationcomplete all as specified and as directed. (Note-MCBs will be measured separately)

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Schneider.

Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 Star rated complete with all accessories such as PVC connection pipe for Hot/Cold water, safety valve, thermostate,NRV, connection piece etc complete all as specified and as directed.. Make:Havells/CG/Bajaj.

Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 Litre, BEE 5 Star rated complete with all accessories such as PVC connection pipe for Hot/Cold Water, safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.. Make:Havells/Racold/Bajaj

Supply and fixing stop valve brass chromium plated screwed down for size 15mm pipe ISI marked complete all as specified and as directed.

Supply and fixing PVC flexible connection graded suitable for hot water, 450mm long (Set of two) for inlet/outlet connections of geysers with heat resistance washers and nuts complete all as specified and as directed.

Supply and fixing 15mm bore GI pipe medium grade galvanised , with all fittings and fixed complete all as specified and as directed.

Supply and fixing bib cock brass chromium plated screwed down for size 15mm dia GI pipe complete all as specified and as directed.

Point wiring for one light/ fan point controlled by one way switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5mm and 20mm dia), medium grade with sunk Cl / Pressed steel terminal boxes with 3mm thick laminated sheet cover including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed.

All as per Srl item No 141 but for one independent with PVC insulated, unsheathed FRLS cable 4.0 sqmm copper multistrand condutor, alongwith PVC insulated and unsheathed FRLS cable 2.5 sqmm multi stranded copper conductor earth wire connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed. Make - KEI/Finolex/Polycab as approved by GE.

All as per srl item No 141 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 141 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

S&F Switch piano flush type 5 Amps single pole one way complete all as specified and as directed.

S&F Switch socket combination 2-in-3 pin 5 Amps flush type complete all as specified and as directed.

S&F Switch socket combination 3 pin16A, flush type complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize complete all as specified and as directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S&F in replacement MCB Single Pole, 230 Volt, Rating 10 to 40 Amps complete all as specified and as directed. Make: Legrand/ C&S / Anchor.

S&F in replacement MCB Single Pole and Neutral , 230 Volt, Rating 63 Amps complete all as specified and as directed. Make: Legrand/ C&S / Anchor.

M&L for Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and directed. Note :- (i) Item include the cost of earth lead and GI protection pipe upto 7.5 mtr length. (ii) On completion of Earthing Contractor should check Earthing Results and submit the Test Report to Egnineer-in-Charge. If desired results are not obtained then Earthing shall be redone by the contractor at his own cost.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size all as specified including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately.

M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

M&L Point wiring for one light point controlled by one switch with 1.5 Sqmm PVC insulated HRFR/FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including stove enamelled steel conduit concealed / surface on wall with 1.5mm thick pressed steel terminal boxes concealed in walls painted the same inside and out side with one coat of black bitumen paint including inner and outer sheet for fixing of switches along with PVC insulated and unsheathed HRFR/FRLS 1.5Sqmm multi stranded copper conductor cable (green colour) as earth lead complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

M&L for switch flame proof rotary type with termination box in LM6, 16A, single pole,250V complete all as specified and as directed.

Supply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing in repairs Air terminators Single pointed copper rod 12mm dia and 300mm long with necessary fixing arrangements on roof including taking down of old rusted complete all as specified and as directed.

Supply and fixing in repairs test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm, drilled and screwed including 3 nos 8mm dia 25 mm hexogonal head screw including taking down old rusted complete all as specified and as directed.

Supply and fixing in repairs rectangular PVC insulators for copper strip complete all as specified and as directed.

Supply and fixing in repairs Copper Strip 20 x 3.15mm and fixing with screws as continuous lead from Copper air termination rod to test point ternimal as down conductor, roof conductor and continuous earth lead to test point terminal including taking down of old rusted complete all as specified and as directed. Note:- All the jonts shall be made with copper brazing to get proper conductivity.

M&L for Earthing complete with Copper earth plate electrode 600mm x 600mm x 3.15 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level with top edge of earth plate not less than 1.5 m below the normal ground level) connected with and including to copper strip as earth wire 20 x 3.15 mm dia by means of bolts, nuts, check nuts and washers of brass all as shown in elelctrical plate No 3 including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, 40mm dia GI light grade protection pipe with funnel and wire mesh, PCC Pit in 1:2:4 type B 1 using 20mm graded stone aggregate with angle iron 40x40x5mm frame, RCC pit cover of suitable size complete all as specified and directed testing for required value complete. Note :- (i) Item include the cost of earth lead and GI protection pipe upto 7.5 mtr length. (ii) On completion of Earthing Contractor should check Earthing Results and submit the Test Report to Engr-in-charge. If desired results are not obtained then Earthing shall be redone by the contractor at his own cost.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 4 way TPN DB 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification. Make-Indo asian/Havells/ Legrand/Indoasian Elvira/ Schneider complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make:Havells/polycab/Finolex

RAMAN CONSTRUCTION CO

s l sharma and sons

khajuria builders

VARDHMAN INTERNATIONAL