8582 REPAIR RENEWAL OF PLUMBING SANITARY FITTINGS PLASTERING FLOORING DADO AND CONNECTED ITEMS IN HOSPITAL BLDG UNDER AGE B R III OF GE SOUTH PUNE

Amount

M&L for vitrified tiles, double charged of 600x600x8-10mm thick size, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cm 1:6 including dismantling of old existing floor, hearth etc of any type including cement mortar bedding layer and removing of debries etc outside MD land complete all as specified and directed.

M&L for non-skid Ceramic coloured tiles of size 400x400x 7 to 8 mm thick (square/rectangular), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:6 including dismantling of old existing floor tiles including cement mortar bedding and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles in on vertical surface, 600X300X7mm thick size set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing coat in CM 1:3 including triangular filleting on top edges in CM 1:3 including dismantling of old existing wall tiles including cement mortar backing coat and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified tiles, double charged of 600X600X8 to 10 mm thick size as on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:4 including triangular filleting at top edges in CM 1:4 including dismantling of old existing wall tiles including cement mortar backing coat and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge

M&L for vitrified tiles, matt finished of 600X1200X10 mm thick size as in floors, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm thick screed bedding in CM 1:6 including dismantling of old existing floor tiles including cement mortar bedding layer and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified tiles, matt finished of 600X1200X10 mm thick size as on vertical surface etc., set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plastering in CM 1:4 including triangular filleting at top edges in CM 1:4 including dismantling of old existing wall tiles including cement mortar backing coat and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge

Demolition of PCC of any description and in any position not otherwise specifically provided for including removing of the demolished materials and debries etc outside MD land complete all as specified and directed

M&L for PCC 1:2:4 type B-0, 25mm average thickness, levelling course as in padding, finish the surfaces of concrete fair and even complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and smooth using extra cement as in path, plinth protection complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, finish the surfaces fair & even etc complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain coloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade rubber moulded glossy finish with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of old existing floors of any type including bedding layer (if nay) and removing of debries etc outside MD land complete all as specified and directed

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry as in floor laid over and including 20mm thick screed bed in CM (1:6) including demolition of old existing floors including bedding layer and removing of debries etc outside MD land complete all as specified and directed

M&L for vitrified chequered cement concrete glazed tiles of size 30cmx30cmx10 to 12mm thick as in floor laid and jointed in cement slurry and pointed in grey cement and pigment laid over and including 20 mm thick screed bed in CM (1:6) including demolition of old existing floors including bedding layer and removing of debries etc outside MD land complete all as specified and directed

S&F stainless steel butt hinge, medium weight, cold rolled, 100mm long complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and as directed.

S&F mortice lock, 4 lever of brass finished, vertical type of 65mm size, complete all as specified and directed.

S&F 150mm size extruded brass handles, fabricated type polished, complete all as directed.

S&F door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

Rounding to edges of stone slabs and polishing in edges, such as in steps, shelf cooking platform, and other similar situations complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick as in fixed independently in shelves for cooking plateform, laid over and including 15mm thick screed bed in CM 1:6, jointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc, including dismantling of old existing stone slab including bedding layer and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bottle trap with internal partition, 32mm size with 250mm & 190mm Long wall connection pipes and wall flange etc complete including taking down of old unserviceable bottle trap complete all as specified & directed. Make : “Jaquar” Product code ALM-WHM-769L250x190 or equivalent model in CERA / Parryware

S&F in repairs single piece-WC with PP Seat cover, hinges, fixing accessories, accessories set and cistern fittings complete including taking down of old unserviceable WC complete all as specified and as directed. Make : “Jaquar” of cat no SLS-WHT-6851S110PP or equivalent model in MARC/ ESS-ESS as approved

S&F in repairs, stainless steel plate rack of size 24 inch x 30 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali / Jain Brothers Sanitation Pvt Ltd (Jayna) as approved

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks including dismantling of old existing brick work or stone boulders or PCC block masonry built in cement mortar complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping on top of wall, kerb, bed blocks and the like including weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces duly mixed with WPC as per manufacturer's instructions and finished the surfaces even and smooth with out using extra cement including taking down of old cement plaster and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge. Note :- WPC will be measured and paid separatley.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces duly mixed with WPC as per manufacturer's instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- WPC will be measured and paid separatley.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

M&L for rendering, 10 mm thick in cement mortar 1: 6 on fair faces of brick / AAC block / PCC block work or concrete surfaces finished even & smooth without using extra cement including taking down of old cement plaster from brick or stone surface of wall built in cement & sand mortar including racking out joints, hacking for key, scrubbing down with water etc with and including preparation of new surface of wall and applying two coats of plastic emulsion paint including removing of debries etc outside MD land complete all as specified and directed

M&L for providing and applying Chryso Polyband system for horizontal & vertical expansion joint work (Chryso Polyband 200mm x 1mm) with Chryso Polyband EPA adhesive, all as per manufacturer's instruction and as specified and directed by Engineer-In-Charge

Material & Labour for stainless steel sheet 1.3mm thick (202 grade) for horizontal & vertical expansion joint (to be fixed on Chryso Polyband 200mm x 1mm) fixed with screws, all as per manufacturer's instructions complete all as specified and directed by Engineer-In-Charge.

S&F in repairs table top basin of Size 610x415x160mm, Make : “Jaquar” Product code DRS-WHT-37601 or equivalent model in CERA / Parryware complete all as specified & directed

S & F in repair 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.

S & F Towel Rail 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs.

S & F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs, complete all as specified and directed.

S&F in repairs 19/20 mm thick prelaminated particle board exterior grade prelaminated one sides with decorative choice and other balancing side white laminations, fixed with nails to timber frame work, complete all as specified and directed.

M&L for 2nd class hard wood (Sal) as in scantling, clean sawn timber as in batten frame to support the paneling complete all as specified and directed

M&L for second class hard wood moulding as in cornices, picture rails and the like exc. 6 sqcm but n. exc. 13 sqcm in section, fixed with screws complete all as specified and directed

M&L for preparing surfaces of wood and wood based materials of new surface of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and directed

M&L for french polishing till attain glossy finish on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and directed

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 160mm bore 0.4 Mpa(4.0Kg/cmSq), single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore, complete all as specified and directed.

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 75mm dia, cast iron nahani / floor trap with stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs 100mm dia, cast iron nahani / floor trap with stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity approved make including all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc , complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position , complete all as specified and directed.

S&F in repairs vitreous china half stall type urinal flat back, size of 465x355x265 mm (Minimum), white, with grating and union for discharge pipe excluding flushing cistern but including 60 cm long PVC flush pipe 32mm dia and PVC waste coupling, complete all as specified and directed.

S & F in repairs Urinal spreader of Brass any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S & F in repairs Plastic water closet seat of any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed.

S & F PVC connection 30 cm long 15 mm bore with 2 Nos brass check nuts fixed in repairs, complete all as specified and directed.

S & F PVC connection 45 cm long 15 mm bore with 2 Nos brass check nuts fixed in repairs, complete all as specified and directed.

S&F in repairs of PVC connection 60 cm long 15 mm bore with 2 Nos brass check nuts fixed, complete all as specified and directed.

S&F in repair CP sink mixer with swinging casted spout (wall mounted model) with connecting legs and wall flanges for 15mm bore of pipe conforming to CAT No. SOL-6309 of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S&F in repair stainless steel toilet paper holder with flap recessed type stainless steel Cat ID AHS-1533 of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S&F in repair CP Soap dish brass chromium plated. Cat ID AHS-1531 of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S&F in repairs high density polythene pipe 50mm dia (HDPE) of pressure rating 6kgf/cm² fixed to walls or floor including bend, tee, elbow etc.complete all as specified and directed.

S&F in repair vitreous china wash hand basin white Oval shape Under counter Basin with Fixing Accessories,CAT ID-FLS-WHT-5701Size: 560x430x195 mm of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S&F in repair basin mixer chromium plated 15mm bore of pipe conforming to CAT No. CQT-23167B of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S & F in repairs, Two way bib cock with wall flange brass CP toilet fittings conforming to CAT No. FUS-29041 of "Jaquar" or of Equivalent makes as specified here in after, complete all as specified and directed.

S&F for GI tubing 15mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down old unserviceable GI pipe, complete all as specified and as directed

S&F for GI tubing 20mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down old unserviceable GI pipe, complete all as specified and as directed

S&F for GI tubing 25mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down old unserviceable GI pipe, complete all as specified and as directed

S&F for GI tubing 40mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down old unserviceable GI pipe, complete all as specified and as directed

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting exc. 10 & n. exc. 20cm girth, complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal snow white 630x480mm flat back including and providing waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc complete all as specified and directed.

S & F in repairs PVC flexible waste pipe 40mm bore of suitable length, complete all as specified and directed..

S & F in repair grating doom of stainless steel 75 to 100 mm dia complete all as specified and directed.

M&L for CORESEAL 357A / CORESEAL 357 CAT and CORESEAL - 135A / CORESEAL 135B as in carrying out non destructive water proofing treatment to sunken portion slab floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical methods such as with and including by using (a) HYDROPHOBIC PU GROUTING (b). EPOXY COATINGS etc. including cleaning of surface with wire brush detecting the sources of leakages and making hole and fixing the metallic packer by injecting hydrophobic PU foam and sealer as per manufacturers instruction (Average 1metallic packer per Sqm) complete all as specified and directed by Engr-in-charge. Make : Build core chemicals or equivalent make as approved

M&L for cutting holes into or through brick or stone walls built in cement mortar, superficial area exc. 150 Sq. cm but n. exc. 400 Sq. cm and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed.

S&F in repairs 20mm bore GI tank nipple including with rubber washer etc suitable for HDPE water tank, complete all as specified and as directed.

S&F in repairs 25mm bore GI tank nipple including with rubber washer etc suitable for HDPE water tank, complete all as specified and as directed.

MONA ASSOCIATES (BID ID -3076063)

REKHA ELECTRICALS (BID ID -3077388)

M/s.BAJRANG CONSTRUCTION (BID ID -3080758)

Santosh Pandurang Pise (BID ID -3083362)