GE (N) P/TOKEN- 35 OF 2020-2021PROVISION OF CERTAIN SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

M&L Brick work with fly ash bricks, old size bricks (Non modular, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

All as per Srl item No. 1 Above but except bricks

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in and including 15mm thick cement mortar (1:4) backing, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges including dismantling of existing stone slab/ tile complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite/ green marble slab complete all as directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 3 and not exc. 6Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 6 and not exc. 13Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 13 and not exc. 25Sq.cm complete all as specified and as directed.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/ Duraplast/ Accucell

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 4mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 35mmx 6mm thick 2nd class hard wood plain cover fillets on all sides including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Supply and fix factory made solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm x 20mm (19 gauge) for top rail, bottom rail andin styles with 2,4, or 6 raised panel design with 5 mm thick Moulded Prelam PVC Sheet on the front face & 5 mm thick prelam PVC plain sheet on back face, inside core shall be of PVC soild board of 20mm thick, door shall be provided with 20mm thick PVC lipping all around the edges, supplying & fixing in frame at site as per specification & drawing given in MES SSR part -I and II. Note: All screws shall be self tapping chromium plated screw not less then 50mm long.

Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 33 to 35mm thick consisting of frame made up of MS tube of size 25mm X 25mm (19 guage) for top & bottom rail, and in styles. Single piece plane coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 20mm thick struck inside with solvent cement. Plane colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC board 22mm to 25 mm thick solid core board . Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.4mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 38mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fix for 150 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolt, fixed with screws complete all as specified and as directed.

Supply and fix for 250mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

Supply and fix in repair for 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm medium weight all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

Supply and fix for 75mm size butt hinges, cast brass, type D-11 with mild steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and as directed .

Supply and fix in reapir, 300mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

Supply and fix, 150mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix for brass cup board lock, size 75mm of 6 levers with duplicate key complete all as specified and as directed.

Supply and fix for magnetic catch, heavy duty and connected plate to shutters and frame complete all as specified and as directed.

S&F in repairs stainless steel single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘Continental' Series or equivalent of Make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in reapir for floor door stopper of brass body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix in repair for aluminium anodised ventilator using aluminium section rectangular tube of size 63.5mm x 25mm x 1.5mm standard including design glass 3.5mm thick and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted/ black glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply and fix for fully glazed single/ double leaf openable door, using aluminium powder coated sections on door floor spring, pivots, with 4.5mm thick glass in panels fixed with aluminium glazing clips Jindal section No. 19381 and 19352 and PVC rubber beading all around including 1” interlock and handle, two lever door lock, sliding wheel complete all as specified and as directed. Jindal section Nos : Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling, to the size and pattern as directed including fixing on walls, floors etc. complete all as specified directed.

Material and labour for 12mm thick plywood, grade BWP, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah, wall panelling to the size and pattern including fixing on walls, floors etc. complete all as shown on drawing and as specified and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, racks and wall panelling to the size and pattern as directed including fixing on walls, floors etc. complete all as specified and as directed.

Material and labour for 4mm thick one side decorative group match veneer plywood and application of resin pigment and hardener to desired colour and pattern and applying two or more coats of melamine polish with spray guns, compressor etc till the desired glossy surface is obtained complete all as specified and as directed.

S&F 12mm to 12.5mm thick mineral fibre false ceiling board only of size 595mmx 595mm and fixed to GI/wooden frame work with nails or screws to ceiling all as specified including dismantling of ceiling board and removing rubbish off the premises complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note : the hight of ceiling is up to 5 Metres.

S&F 6mm thick asbestos cement plain false ceiling board only of size 595mmx 595mm and fixed to GI/wooden frame work with nails or screws to ceiling all as specified including dismantling of ceiling board and removing rubbish off the premises complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note : the hight of ceiling is up to 5 Metres.

Material and labour for 12mm to 12.5mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.5mm x 23.5mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 25mm x 23.5mm x 1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Height of ceiling is above 5 metres.

Material and labour for false ceiling with Single layer of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.

Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling including dismantling existing complete all as specified and as directed.

M & L machine cut polished cudappah stone slab 20-25mm thick as in lintels, shelves, partitions, cooking platform below granite stone and the like over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making good disturbed surface complete all as specified and as directed.

M & L machine cut cudappah stone slab 20-25mm thick as in lintels, shelves, vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab or arldite including rubbing and polishing complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic tiles, of size 600mm x 300mm x 9 to 10mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic highlighter tiles, of size 600mm x 300mm x 7 to 8 mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured, ceramic tiles of size 300mm x 300mm x 8 to10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. Make: Johnsun Endura or equivalent of Kajaria/ Somani as approved by GE.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured, double charged, vitrified ceramic tiles, polished of area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm, 10 mm thick as in skirting/dado, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L for 25mm to 27mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered to receive new finish complete all as specified and directed. (For item No. 87 to 90)

Material and labour for appying 1 to 1.5mm thick white cementitious wall care fine putty on walls, filling cracks by crack filler and smoothen surface with sand paper complete all as specified and as directed.

Material and labour for appying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

Material and labour for appying one coat of acrylic distemper of approved tint on ceiling surfaces complete all as specified and as directed.

Material and labour for preparation of surface and appying two coats of 100% acrylic weather proof exterior emulsion paint over a coat of primer to roof, parapet, wall, floor etc. complete all as specified and as directed.

Material and labour for applying two coats of lustre paint (water based) over a coat of primer on wall/ ceiling surface complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces ceiling and applying one coat of dry distemper complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ emulsion distemper over a coat of priming paint and white cementitious wall care fine putty 1 to 1.5mm thick complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc., preparing surfaces, applying putty where required and applying two coats of oil bound/ emulsion distemper over a coat of primer complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic exterior emulsion paint complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for french polishing on old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall, chajja, terrace and parapet walls, grooves etc. complete all as per manufacturer instructions, as specified and as directed by Engineer-in-Charge. Make: Chemistik PU 50 (Heavy duty PU waterproof coating) or equivalent of Pidilite Industries Ltd DR Fixit, FOSROC as approved by GE

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs chrome plated quarter turn wall mixer 3-in-1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs Cat No. FUS-29281 of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs brass chromium plated quarter turn wall mixer with provision for overhead shower complete with wall flange with 115mm long bend pipe on upper side, connecting legs Cat No. FUS-29273 UPR of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs brass chromium plated swan neck, wall mounted single lever sink mixer with swinging spout on upper side with connecting legs and wall flange Cat No. FUS-29165 of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs for chromium plated, overhead shower 120mm dia. round shape multi flow with cascade effect (ABS body chrome plated with gray face plate) with rubit cleaning system, complete all as specified and as directed. Cat No.OHS-1779 of make Jaquar or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repairs for brass chromium plated, overhead shower 150mmX150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, (without arm) complete all as specified and as directed. Cat No.OHS-35495 of make Jaquar or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repair cast copper alloy chromium plated Shower Arm casted 190mm long light body round shape for wall mounted showers with flange complete all as specified and as drected. Make: Jaquar Cat No. SHA-477 or equivalent of Prayag or make as per Appx 'A' as approved by GE.

Supply and fix in repairs, chromium plated single lever extended basin mixer (height 85mm) without popup waste system with 450mm long braided hoses as per Cat No.FUS-29023B of make Jaquar ‘FUSION ' series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs, chromium plated two way bib cock 15mm dia Cat No. CON-041KN of make Jaquar ‘CONTINENTAL' series or equivalent as approved by GE. all as specified and as directed.

S&F in repairs brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) with 8mm dia, 1.0 metres long flexible tube and wall hook all as per Cat No. ALD-573 of make Jaquar ' ALLIED' or equivalent as approved by GE with chromium plated angular cock 15mm bore with stud complete all as specified and as directed.

S&F in repairs chromium plated toilet roll holder ,Cat No. ACN-1151N of make Jaquar '‘Continental Series' or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE. all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix in repairs for brass chromium plated soap dish holder Cat No.ACN-1131N of make Jaquar 'Contonental series' or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs brass chromium plated towel ring round with round flange, Cat No. ACN-1121BN of make Jaquar ‘Continental Series' or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated towel ring square, Cat No. AKP-35721P of make Jaquar Kubix Prime or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock standard (old handle) without flange of PTMT any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or equivalent of makes as per Appx. 'B' as approved by GE complete all as specified and as directed.

Supply and fix in repair for 15mm size PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed. Make: Prayag Cat No. 323-Z or equivqlent as per Appx 'A' as approved by GE

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors including taking up/down CI pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down CI pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore including taking down CI bend complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore including taking down CI bend complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe including taking down CI branch complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door including taking down CI T complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110mm bore pipes with access door complete including taking down CI T all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) including taking up CI trap complete all as specified and directed

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with 100mm bore CI 'P' trap long arm of length upto 700mm as per site requiremen, front or back inlet and foot rests any pattern and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. including making good to floor complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repair for vitreous chinaware wash hand basin with pedestal, white, flat back, size 550x400 mm including pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly nuts screwed for iron pipe for 15mm bore, CP waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length and all necessary inlet outlet connections including CI brackets complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin, starwhite with pedestal, size 550x400x820mm with fixing accessories including pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly nuts screwed for iron pipe for 15mm bore, 32mm dia. chromium plated, CP brass waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required lnght and all necessary inlet outlet connections complete all as specified and as directed. Make :- Hindware Model Mario Cat No. 10087 Ped 11003 or equivalent models of Cera/Parryware/Jaquar.

Supply and fix for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, 32mm dia. waste pipe, CP grating including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 160mm all as specified and directed.

Supply and fix in repairs, stainless steel sink Duet regular double bowl solitaire range made of Stainless Steel grade 304, 1mm thick,Gloss finish, with plug, washers and waste coupling, waste pipe, including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 810mm x 510mm x203mm with bowl size 405mm X 354mm X 203mm all as specified and directed. Make :-Prayag cat No. 1232D or equivalent of Blue Star/ Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )as approved by GE. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repair for 10mm thick corner glass of size 30cm X 30cm, with stainlesss steel decorative type railing on front face and fixed with 3 Nos. 'D'type stainlesss steel brackets complete all as specified and as directed.

Supply and fix in reapir for PVC cabinet with looking mirror, single shutter of size 450mm X 350mm complete all as specified and as directed. Make: Prayag Cat No. 557 or equivalent of Neelkamal or as approved by GE.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit including removal of batten/ conduit/ gutties/ wooden boards/ switchs/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, regulatorr, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.138 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.138 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.138 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.138 here-in-before but point wiring for one light point controlled by two, two way switchs 5/6 Amps.

All as per serial item No.138 here-in-before but point wiring (for ceiling portion through and including heavy duty ISI marked, PVC casing and capping including all accessories) for one ceiling fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.138 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.138 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing caping including all accessories fixed to walls/ ceilings etc., with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.146 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.146 here-in-before but point wiring for one 3 pin 5/6 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.146 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.146 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular switch, two way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular bell push, 6Amps, 1 module complete all as specified and as directed.

Suply and fix for bell electric suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Fixing only for modular step type electronic fan regulator 2 module obtained serviceable from item No. 135 complete all as specified and as directed.

Supply and fixing for TV socket complete all as speccified and as direceted

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug top and socket complete with one MCB DP 20 Amp complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Refixing only old serviceable MCB SP/ SPN/ TPN of any capacity obtained from Item No 136 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Refixing only old serviceable MCB DB SPN/ TPN of any capacity obtained from Item No 136 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 135 complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

S&F for wall mounted luminaire with double arms and decorative glass shade with suitable holder for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed. Make Jaquar Cat Part No. JNL-NKL-WLBPG002 or its equivalent in Philips, havells.

Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 10 Watt LED lamp including lamp complete all as specified and as directed Make- Jaquar Cat No-CWLL01V109XX or equivalent

Supply and fix for LED down light recess mounted luminaire, round type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150-270 volts AC, 50 Hz as per Cat No.BZSLO 15W NW of make Bajaj/ Philips Cat Part No DN172B LED9S-6500 PSU of or its equavalent in Wipro complete all as specified and as directed.

Supply and fixing ceiling/ wall surface mounted round LED down light with PC housing suitable for 10 Watt LED lamp including lamp complete all as specified & as directed. Make- Jaquar Cat No-LVOL01R010XW or equivalent of Bajaj, Havells, Philips

Supply and fix for wall mounted LED 18 watts with lumens out put not less than 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CWc of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed.

Supply and fixing 22 Watt LED fitting high quality design PC Batten with decorative end caps complete all as specified and as directed. Make- Jaquar Cat No-LGLZPCX022XW or equivalent

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts 596x596x9mm size sleek design aluminium housing, polycarbonate diffuser white powder coated finish operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BARSQL 36W NW of make Bajaj or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved complete all as specified and as directed.

Fixing only serviceable batten energy efficient tube light luminaries, obtained from Item ser No 135 here-in-before of any capacity & size, 230Volts including provision of PVC insulated sheathed round flexible wire with multistranded copper conductor of size 0.75 Sqmm , 3 Core 110 Volts grade , from light fittings to ceiling rose complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Hanging only ceiling/ exhaust fan and connecting including provision of flexible PVC copper conductor cable of size 23/0.0076 twin core from ceiling rose or connecter to fan including taking down fan complete all as specified and directed.

S&F for wall mounted fan of size 400mm sweep 3 blade, 3 No. speed, 240 volt AC 50 HZ single phase 1320RPM motor speed double string and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Bajaj, Usha, Orient, Crompton, Havells.

Supply and Install storage type electric water heater with high precision precalibrated thermostat, safety valve, preset thermal cutout, fire retardant power cord, ultra thick stainless steel inner tank, rust and shock proof ABS outer body non ferrous pressure plate compact and easy to install colour changing indicator , copper heating element of Cap 25 Ltr with rated wattage 2 KW , 230 Volts 50 Hz of Temp range 35º C to 75º C working pressure 0.8 mpa including inlet and outlet connection PVC flexible pipe complete all as specified & as directed

Supply and fixing of exhaust fan metal body of 300mm sweep, 1400 RPM, 01 No. speed set, 220/230V, AC single phase, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Bajaj Bahar or equivalent of Orient, CG

M&L for cutting and making hole into or through cement concrete or stone/ brick masonry wall of thickness upto 45 cm and in girth 45 cm for fixing exhaust fan of size 300mm sweep & providing fasterner grouted in wall four nos inside for fixing of exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface including lime white wash all as specified and as directed.

Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including two run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 6.0 Sqmm, two run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including two run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 10.0 Sqmm, two run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 10.0 Sqmm, one run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

M/s Asrani and sons

Gauri Associates

J P ASSOCIATES