Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.2 L+₹3.3 L (22.0%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L2₹18.3 L+₹3.3 L (22.4%)Rejected-Finance H NO 190 S 4 CHODANKAR RESIDENCY NEAR GANPATI TEMPLE CENTRAL HORTA AQUEM BAIXO NAVELIM SALCETE GOA 403707 | SOUTH GOA | GOA | 403707 | L2 | Rejected-Finance Not being L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAJI
GARRISON ENGINEER SV ROAD PANAJI GOA-403001
REPAIR REPLACEMENT OF SEWAGE LINE CLEANING OF SEPTIC TANK FILTER BEDS AT MARGAO INCLUDING ASC UNDER GE PANAJI GOA
2022_MES_561218_1
8936/E8
Open Tender
Civil Works
Item Rate
300 days
GE PANAJI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GARRISON ENGINEER PANAJI
₹40,000
Yes
4 Feb 2023
3 Nov 2022
3 Dec 2022
3 Nov 2022
1 Dec 2022
17 Nov 2022
3 Nov 2022 - 10 Nov 2022
Amount
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc or for laying of pipes, wells cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.5m depth and getting out in hard/dense soil complete all as specified and directed.
Demolition of brick work or laterite stone masonry built in cement mortar including precast concrete articles complete all as specified and directed.
Demolition of cement concrete (unreinforced)in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for such as cover slab of manholes and septic tank, etc, reinforcement cut as required to facilitate demolition complete all as specified and directed.
Demolition and breaking up 100/110mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.
All as per item no 5 above but 150/160mm dia drain pipes.
All as per item no 5 above but 200/225mm dia drain pipes.
Material and labour for plain cement concrete 1:4:8(type D2) using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for pre-cast reinforced cement concrete 1:3:6 (type C-1) using 20mm graded crushed stone aggregate as in cover slab for manholes in any position and set in cement mortar 1:4 with and including necessary form work complete all as specified and as directed.
Material & Labour 75mm thick plain cement concrete 1:3:6 (type C2) using 40mm graded stone aggregate, finishing the surface even and fair without using extra cement as in plinth protection and similar work complete all as specified and directed.
Material and labour for 100mm bore reinforced concrete drain pipes, class NP2, Conforming to IS 458-2003, laid and jointed in cement mortor 1:2 with collars and including testing complete all as specified and directed.
All as per item no 11 above but bore of pipe 150mm dia.
All as per item no 11 above but bore of pipe 200mm dia.
Material and labour for concrete bed to drain pipes of 110mm dia in cement concrete 1:4:8 (type D2) using 40mm graded crushed stone aggregate including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed. Note for Srl item No 14 & 15 (i) Thickness of bed below the barrel of pipes shall be 10 cm (ii) Width of bed shall be outer diameter of drain pipes (not of sockets/ collars) plus 30 cm
All as per item no 14 above but drain pipe of 160mm dia.
Material and labour for concrete bed to drain pipes of 200mm dia in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed. Note : (i) Thickness of bed below the barrel of pipes shall be 15 cm (ii) Width of bed shall be outer diameter of drain pipes (not of sockets/ collars) plus 30 cm
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/dense soil complete all as specified and directed.
Removing excavated surplus spoil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2020
Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, of squared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specified and directed.
Taking down cement plater on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 15mm thick cement plaster in cement mortar 1:4 on stone masonry surfaces other than fair face, finished even and fair without using extra cement and mixed with water proofing compound complete all as specified and as directed. Note:- Water proofing compond shall be measured and paid separately.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for providing plain cement concrete 1:2:4 (type B-1) using 20mm graded crushed stone aggregate set in CM 1:4, as in copings, including necessary form work complete all as specified and as directed.
Supply only 12.5mm graded crushed trap stone aggregate complete all as specified and directed.
Supply only 20mm graded crushed trap stone aggregate complete all as specified and directed.
Cleaning of filter bed of any capacity by removing efficient filler media to a depth of 30cm cleaning and washing the aggregate, relaying, spreading leveling and making good the filter bed to original level by using serviceable filter media aggregate retrieved after cleaning and with new 12.5mm and 20mm graded trap stone aggregate complete all as specified and directed. Note: - Supply of new aggregate shall be measured and paid separately under respective items of sch ‘A’.
Taking out liquid/ solid content/ sludge from sump, septic tank, sewage line and manholes of any depth using vehicle mounted sewer suction machine (Honey Sucker) with pump set to remove mud/ sludge/muck human extra in Foul conditions, getting out and including disposal of liquid/soild content/ sludge out of the Cantt Area including cleaning thoroughly with fresh water complete all as specified and directed. Note:- 1. Suction Unit shall be capable of syphoning out mud and slurry, grit and other material from sanitary, storm and sewerage systems from a depth of minimum 8 m. 2. The waste shall be removed through mechanically operated sewage sucker only. 3. The sewage sucker shall be made available by contractor at AGE B/R Madgao area during office hours whenever called for. Recovery @ Rs 2000/day shall be effected for delay in removing mud/ sludge etc.
Cleaning and clearing of underground blocked sewage line 300mm dia pipe including manholes by taking off manhole cover and re-fixing the same after cleaning by removing any type of blockage including taking out the muck, mud and other debries from inside the sewage line/ manholes and de-chocking mechanically by Jetting using pressure and flushing after cleaning and removing the debries to a distance exceeding 200m and not exceeding 250 metre and including borrow pits and covering the borrow pits with 15 cms thick layer of soil complete all as specified and as directed by the Engineer-in-Charge. Note:- The waste removal/ cleaning of sewage lines shall be cleaned through mechanically operated jetting system only.
All as per item no. 30 above but 200mm dia pipes
All as per item no. 30 above but 150mm dia pipes.
All as per item no. 30 above but 80mm dia pipe.
Cleaning and clearing of blocked IWCs & EWCs to sewage line upto 1st manholes by rodding or any other suitable method & taking out the muck, mud and other debris from WCs and the sewage line cleaning with fresh water & removing the debris upto a distance exceeding 200 m & not exceeding 250 m and covering the same with a layer of soil not less than 15cm thick complete all as specified and as directed.
Cleaning & clearing of blocked chocked floor trap in kitchen & bathrooms including gully trap, the waste water line connection etc by rodding or by any other suitable method & taking out the debris to a distance exceeding 200m & not exceeding 250m & covering the same with a layer of soil not less than 15cm thick complete and drain out the floors trap, gully traps, waste pipe and soil pipe with fresh water etc complete all as specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
Taking down PVC (SWR) pipe of size 75mm/100mm from walls complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints with rubber lubricants fixed to walls or laid under floor complete all as specified and directed.
All as per item no 38 above but bore of pipe 110mm dia.
Supply and fix 75mm bore PVC (SWR) bends in any radious complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bends in any radious complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) branch piece single ( single Y) equal or unequal provided with access door complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) branch piece single ( single Y) equal or unequal provided with access door complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) branch piece double ( single Y) equal or unequal provided with access door complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) branch piece double ( single Y) equal or unequal provided with access door complete all as specified and directed.
Manik Constructions
Sagar Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .