Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹7.7 Laccepted-finance | ₹7.7 L | accepted-finance |
Tender Value
₹8.4 L
EMD Value
₹11,000
Closing Date
16 Feb 2026, 10:00 pmClosed
Rural Development and Panchayat Raj Department
EE PRE DIVISION BALLARI
Development of Sri Ganga Parameshwari temle in Kuruvalli village of Siruguppa taluk Ballari Dist (Reserved for CAT-IIA)
RDPR/2025-26/BD/WORK_INDENT24224
RDPR/2025-26/BD/WORK_INDENT24224
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Ballari
₹500
₹11,000
9 Feb 2026
9 Feb 2026
11 Feb 2026
Development of Sri Ganga Parameshwari temle in Kuruvalli village of Siruguppa taluk Ballari Dist
code01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and ... 59.87 Cum
code02 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/b... 25.72 Cum
code03 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structu... 14.18 Cum
code04 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structu... 1.16 Cum
code05 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, I... 6.12 Cum
code06 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, I... 4.89 Cum
code07 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 2.05 Tonne
code08 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, s... 4.15 Cum
code09 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by... 34.15 Cum
code10 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin... 28.39 Cum
code11 Inside PlasteringProviding 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and remo... 8.45 Sqm
code12 External plastering Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering... 9.02 Sqm
code13 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi... 47.31 Sqm
code14 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an... 17.47 Sqm
code15 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime... 17.28 Kgs
code16 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro... 529.10 Kgs
code17 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g... 129.60 Sqm
code18 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign ma... 1500.00 cm
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1 24224 CAT-IIA.doc
Tender Document • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .