Work of establishment of pontoon bridge on Singhagarh Ghat (Amauni Ghat) located on Gomti River in Haidergarh development block of Barabanki district

Cartage of pontoon by truck/trailersite store from prayagraaj (mela store/sangam Area) to Gosiyamau ghat Barabanki Pantoon bridge Area.

Cortage of following material from prayagraaj (mela store/sangam Area) to Site Including loading, unloading, labour T&P Etc placing as per division of E/S (i)Cartage of Sal Sleeper

Cartage of Sal Edging

Cartage of Chequirred Plate

Cartage of R.S. Joist 5.20 mtr long

Cartage of R.S. Joist 10.00 mtr long

Cartage of Railing post

Cartage of Main Hole Cover

Erection Work Dragging of Pantoon from dry bed on the river bank to river water pully and rolling them into water to bring in the proper position & water pair of two pantoon with irder 2 anchar them in D/S of pantoon bridge etc all.

Cartage and laying of chaquered plate including loading unloading cost of carriage from store and laying at site as per direction of Engineer in charge.

Fixing of railing post in position including making 16 mm dia 25 cm deep hole with the help of gererator and drill machine over sleeper and all saf edging before fixing the railling post with hepl of 300x16 mm size nut and bolts at 1.25mtr. c/c including all labour, material T&P etc.

Cartage of wooden anchor from store to bridge head including loading unloading cartage etc. as per direction of Engineer in Charge (only for Departmental work)

Relaying of chaquered plate after making camber by spreading of local sand as per direction E/I

Maintenance of pontoon bridge Length of bridge including pile on either side period : Start to end of mela Day Nigth

Construction of Pile culvert. (Labour rate only)

Boat with Mallah (i) Small Boat.

Lattering and painting of sign board of size 4'x3'

Making bariar on bothe site of pantoon bridge with ballies

Supply of Euquiliptis ballies 15cm. Dia for making wooden anchers & piles(khuta) i/c of material, loading, unloading and cartage up to site. I/C all taxes but excluding trade tax. etc complete.

Same as above but 10cm. Dia Euquiliptis ballies

Supply of Fallowing material I/C cost of material, loading, unloding and cartage up to site. I/C all taxes but excluding trade tax. Labour, T&P etc. complete.required for proper complition of the work. a-30x300 mm. Size

M.S. Nut-Bolt 30x150 mm. Size.

M.S. Nut-Bolt 16x300 mm. Size.

M.S. Mallahi nail of 15cm to 30cm. Long

Supply of M.S washar 30mm dia & 20mm. Dia

Supply of Kalkatta Sutali

Supply of Bagahi Bandh

Supply E.C. bages ( Valume 1 cft) plastic I/C cost of bag,babour, Cartage up to the place of anchoring.

Supply of 32mm. Dai Garmant graphil poly propelione Ist mark rope for making of pantoons including cost of material etc. loading unloading cartage up to Seetamarhi ghat store.

Supply of Wire rope 10mm.dia Galvonised ( Grised) of approred quantity including cost of material, loading, unloding and cartage up to site etc. complete.both side railing wire.

Supply of Wire rope 20mm.dia Galvonised ( Grised) of approred quantity including cost of material, loading, unloding and cartage up to site etc. complete. for anchoring of pantoon.

Supply of mild steel iron ankar making bending, cartage including all complete work

Cartage of sal wood sleeper from store to pantoon

Cartage of R.S Zoised girder

Cartage of Chuquerd steel plate from Gosiyamau /Menahua store to pantoon & approch road

Supply & making of Wooden anchor both side of pantoon with sand filling cement bags, ancring of both side of pantoon

Earth work cutting/ filling in river & nala both bank side & leveling ,dresing, cutting for making approch.road

Leveling & Drassing (4cm. Deep) of Road

Providing laying local sand base of chuquerd plate in marshy land area approch road including all complete work.

Fixing of railing wire through hole of railing post and hole of vertical post and making wire stay of each rows and tightened with the help of stay clamps including making of hole in vertical ballies post (labour only)

During carring th pantoon pair from place of anchoring (D/S side of bridge) in water and then to cross the dry bed/shallow water on the way up to th alignment, dsconnecting the pantoon pair and rolling the pantoon and fixing in the alignment after.

Sinking of pnatoon to obtain the proper grading as laid in dry bed/shallow water in the alignment of pantoon bridge as per direction of Engineer-in-charge.

Laying of wooden anchors in the river up steam/Down steam side of the pantoon bridge site including their weaving packing the sand filled bags (av. 90 bags) properly before laying and fixing to pantoon with coir rope/shall rope excluding cost.

Making stay on both side of pontoon bridge with the help of 20mm/10mm wire rope(labour only)

Approach Road Work Earth work in embankment in moorum mixed/black cotton soil. Excavation to be in the form of regular pits not exceeding 0.5 m in depth and earth work in embankment to be in 20 cm layers including ramming & dressing the surface to raquired level and slope and also i/c 1.5m lift and 30m lead

Laying brick soling layer on prepared sub-grade with brick on edge according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412

Construction of 350 mm size NP-3 hume pipe culvert including cost of all material, labour, T & P etc. for proper completion of the work.

Supply and fixing of Board 4x3 LS

Excavatiopn in foundation in ordinary soil ( Loam clay, or sand ) including filling lift upto 1.5 metre (5fts.) and lead upto 30 m.(100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer - in - charge upto a distance of 30 M. (100 fts.) from the foundation trenches. SOR 251

Providing and laying Cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone ballast 40 mm. nominal size) including supply of all materials. Labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in foundation and floors. SOR 281

First class bricks work in 1:4 in cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR 305(b)

2cm. (3/4") thick damp proof coarse with cement and approved coarse sand 1:2 with and including water proofing material as ordered by the Engineer-in-charge in the proportion as specified by the manufacturers, including supply of all materials, labour and T & P etc. required for proper completion of the work and including proper curing and shuttering as necessary. SOR 360

First class bricks work in 1:4 in cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR 305(b)+309(b)

R.C.C work with cement approved course sand and 2 cm {3/4") gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G. G.I. binding wire and including neccessary centering and shuttering etc. and also including supply of all materials, labours and T & P etc. required for proper completion of the work. Binding wire cost being included in the item. SOR 283

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastages and over lapping and hookes. SOR 504

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tie rods ,gratings etc. ( when not included in an over all rates ) wrought to required form, including supply of steel ,bolts, nuts and wastage etc. and their fixing required for proper completion of the work. SOR 502

Mild steel or iron work in heavy sizes such as trusses, builts up gates, door frames ,records racks roof work ,gates etc. wrought to required form, including drilling holes, rivetting or welding where necessary, and also including supply of steel ,bolts, nuts and wastages etc. and their fixing required for completion of the work. SOR 503

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² sqm DSR no 12.1.1

First class brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming and including supply of all materials, labour and T & P etc. required for proper completion of the work. SOR 615

Note- GST will be paid extra for above all items as per Govt. Norms.