Laying cement concerete Road at 1st cross street Lakshmi Amman Nagardiv 79 u-18 z-7

Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab, rectangular beams,'TEE' or 'L' beams, lintels, bed blocks, staircase waists and landing slabs, landing beams ,canopy, etc.,with all cross bracings using mild steel sheets of a size 90x60cmx3.175mm and 10 gauge stiffended with welded mild steelangles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 7.5cm centre to centre etc.,complete BDDATA-147

Providing And Laying. In Position, Standardised Concrete Mix M-25 Grade In Accordance With Is:456-2000; Using 20mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 400 Kg/M3 And Maximum Water Cement Ratio of 0.45 Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.m.) 7730 Kg. of 20mm Machine Crushed Stone Jelly And With About (3.3 Cu.m.) 5156 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs, Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And Os Directed By The Departmental Officers, The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage of Materials) (If pumping of Concrete is required).. BRR - M30

Finishing the Concrete surface of various grades using Power Trowel including hire charges of Power Trowel, fuel charges, labour chargesetc., complete. BRR -PoTro

Providing & Cutting of transverse const. dummy joints of C.C.Slab for a depth of 100mm and a width of 6mm etc., including surface texturing. BRR - CUT CON

Single Arrow Street Name board including Councillors Name Board Supplying and Fixing of Digitally Printed Retroreflective Single Arrow Sign board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 300 mm x 300 mm x 450 mm with M15 Grade cement concrete and the item shall include earthwork excavation, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table 6.9 of IRC 67- 2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards. The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineer-in-charge.

Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8"X2.3/4" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc. Complete

Please Enable Macros to View BoQ information