Repair of joinery, flooring, plastering, filling, sanitary, fitting etc at Zone B at Sonegaon, Nagpur

Amount

Taking down chowkat with shutter (Without taking of shutter from frame) area exceed 1.50 Sqm but not exceed 4.00 Sqm each all as directed by engr-in charge.

Taking down chowkat with shutter (Without taking of shutter from frame) area nexc1.50 Sqm each all as directed by engr-in charge.

Taking down shutter of any description exc 1.00 Sqm but n exc 2.00 Sqm each.all as directed by engr-in charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar, all as specified and direced by Engr-in-Charge.

M&L for cement concrete type B0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring.

M &L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles.

Taking up or down unserviceable 20mm bore GI steel water tubing and connections, fittings.

Taking up or down unserviceable 15mm bore GI steel water tubing and connections, fittings.

Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land.

M&L for screed bed or bedding of layer 15 mm thick in CM (1:4) for laying of floor finishes

M&L for non skid ceramic tiles 6 to 7mm thick of size 300x300mm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L ceramic glazed colour tiles size 300x200x5to 6mm as in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for light colour vitrified tiles 10mm thick (square/rectangular ) area of each tile exceeding 0.36 but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,all as specified and direced by Engr-in-Charge.

M&L for light colour vitrified tiles 10mm thick (square/rectangular ) area of each tile exceeding 0.36 but not exceeding 0.42 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Labourr for Cutting channels, grooves or rebates without reinforcement exc 15 cm but n exc 30cm girth, and trimming surface, all as specified and direced by Engr-in-Charge.

S&F steel water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors all as specified and direced by Engr-in-Charge.

S&F steel water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors all as specified and direced by Engr-in-Charge.

Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests.

S & F in repairs Vitreous china wash water closet pan (Pedestal pattern) white fixed in floor including trap, connecting to drain (or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device.

S&F in repairs PVC flushing cistern low level, 10 lit. Cap. With its complete accessories, fixed complete incl. connection to water pipe and seat.

S & F in repairs vitreous china wash basin, white, flat bock, size 550 x 400 mm including bracket fixed to wall complete.

M&L for Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

S&F brass CP fancy type 15mm bore pillar tap for WHB

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs 15mm dia brass C.P fancy Type stop valves.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm.

S & F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0.all as directed by engr-in charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing.all as directed by engr-in charge.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,all as directed by engr-in charge..

S&F 35mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side all as directed by engr-in charge.

S&F mild steel medium weight could roll 100mm size butt hinges.

S&F mild steel medium weight could roll 75mm size butt hinges.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed all as directed by engr-in charge.

Aluminiumm alloy ,anodised sliding door bolt 300mm with hasp ,staple (bolt type)and fixed clip of sheet cast or extruded section and fixing bolt and sliding bolt of extructed section or cast -Aluminium alloy and fixed. all as directed by engr-in charge.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F for 150mm long aluminum handles, cast type, anodized

S&F165X60mm Pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, all as specified.

S&F 2nd class hard wood 30mm thickness Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.all as directed by engr-in charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple all as directed by engr-in charge.

M &L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work.all as directed by engr-in charge.

Hacking out old broken glass any thickness, size quality or description from steel frame fixed with metal pinning and S&F 4 mm thick frosted glass with putty (in metal frames etc).

Hacking out old broken glass any thickness, size quality or description from steel frame fixed with metal pinning and S&F 4 mm thick sheet glass with putty (in metal frames etc).

S&F sheet glass ordinary quality 3mm thick quality with oil putty in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S & F aluminium section, powder coated as in windows / ventilators / doors with movable or fixed type shutter of any size. Aluminium section medium weight of suitable size of series 'B', cut to size / length, jointed together including all necessary fitting, rubber beading for aluminium sections and for fixing glass and all necessary fitting, locking arrangement complete all as specfied and directed

S & F, 5.5 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed

Taking down aluminium doors /window shutter and refix in same position including making good by replacing its old parts/fittings make it smooth functional required as directed by engr-in charge.

M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded all as directed by engr-in charge.

M &L for preparation new steel and iron surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paints over two coat of primer of red oxide all as directed by engr-in charge.

M&L for one coat of synthetic enamel paint on old painted wooden surface including preparation of surfaces.

M &L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paints.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair Aluminium(extruded body section) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 700 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F 2nd class hardwood 30mm thickness of shutter Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

Dismantling of False ceiling (Fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets

S&F false ceiling of size 605mmX605mm Anodised aluminium snap grid frame work for false ceiling with fixing Gypsum Board 12mm thick in ceiling fixed as per manufacturers instructions all as specified Note:- Cost of making frame work for lighy fitting grills difusers cutouts etc is deemed to be incl in the quoted rate.

M/s Rahul Traders

SRI JD CORPORATION