REPAIR TO BOUNDARY COMPOUND WALL FENCING PATH AND DRAIN AND CONNECTED WORK IN OD SHAKURBASTI AND HIRANKUDNA IN THE AOR OF AGE BR II UNDER GE NORTH DELHI CANTT10

Amount

Taking down cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with old size burnt clay bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for brick work with old size burnt clay bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per the description of srl item No 03 above but except bricks.

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in coping and bending rounded or chamfered on edges including necessary form work to obtain a smooth finishes complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on brick work or concrete surfaces on external wall surface including necessary cement slurry with bulk density 1.40 to 1.70 kg/cum, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer's instructions finished even and smooth complete all as specified and directed.

M&L for preparation of new plastered wall surface two coat of white cement wash over one coat primer complete all as specified and directed. Note:- Rate include complete necessary scoffolding, T&P etc. (work will be executed at highrise bldgs.

M&L for one coat of white cement wash on the old painted surface of wall over a coat of primer after scrapping to prepare the surface even and smooth and complete removing exisiting treatment by sanding of the old painted surface with sanding pad of 240 grit or above having dia 7"/9" to make the surface free from dust of existing wall by skilled labour complete all as specified and directed. Note:- Rate include complete necessary scoffolding, T&P etc. (work will be executed at highrise bldgs.

Demolition of cement concrete in ground floor (unreinforced) and pavings including tiles etc, n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring 75mm thick complete all as specified and directed.

M&L for sand filling 75mm thick under floors or in foundations including watering as required complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS -15658-2006 of 60mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed.

M&L chequered cement concrete tiles PU coated 300mm x 300mm by 30mm thick, with grey cement and no pigments over and including15mm thick screed bed or bedding layer in CM 1:6, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor etc including taking out/dismantling of old pipes complete all as specified.

Dismantling fencing wire mesh, any type as per site all as directed.

S&F galvanised 2 starand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

S&F in repairs 600mm dia razor blade concertina coil complete all as specified and directed.

Supply only chain link MS galavnised any size and type complete all as specified and directed. Note:- The weight of concertina coil shall be ascertained by BOO convened by GE.

Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails straining bolts etc. including provision of bindig wire.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10mm complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion in concrete, brickwork, masonary, etc. and making good disturbed ground all as specified and directed.

M&L for PCC 1:3:6 type C2 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint (1st quality) on new steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith and applying one coat of red oxide, zinc chrome primer complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac or equivalent as approved by GE.

M/S HARINDER SINGH

MOHIT ENTERPRISES

BEHAL TRADERS

M/s Brij Constructions

friends associeates

M/S AADI ENTERPRISES

QUALITY CONSTRUCTIONS CO