Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LQualified | L1 | Qualified MII | |
| 2 | L2₹44.7 L+₹2.8 L (6.58%)Qualified 228A GILL COLONY BHAI BANNOJI MARG KHURLA KINGRA JALANDHAR PUNJAB 144003 | JALANDHAR | PUNJAB | 144003 | L2 | Qualified MSE, MII, Category: General | |
| 3 | L3₹45.9 L+₹4.0 L (9.45%)Qualified | L3 | Qualified MSE, MII, Category: General |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
17 May 2025, 2:00 pmClosed
other section
M and L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10 cm including preparation of surfaces all as specified and as directed.
M and L for Three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and as directed.
S and F steel stainer for sewage sumps of different pores as specified and directed by engineer in charge
Suppy of stand by non clogging pump of 5Hp 1520 LPM with all accessories and fittings as specified and directed by engr in charge
Heavy Duty Double tank type Chemical Dosing system consist of service tank 150 ltrs capacity with Dosing system plunger type
S and F GI strip 25x4mm as earthing lead bolts nuts checknuts and washers all as specified and directed
Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick
Pumping out sewage water from the existing sumps of sewage plant Pump house with the help of Non clogging of pump any kind capacity of pump set not less than 2160 LPM
Lifting the non clogging pump set electrically operated by 15HP 20 HP 3 Phase motor incl column pipe line shaft etc
Dismantling of non clogging submersible pump of capacity 15HP 20 HP for comprerhensive maintenance and if required taking out burnout old winding from the stator
Lowering complete the non clogging pumping set and reflixing the motor carefully including connection and testing
Pumping out sewage water from the existing sumps tanks of STPs MBBR technology with the help of Non clogging
Cleaning of 1.2 MLD Sewage treatment plant after Pumping out sewage water from the existing sumps
Lifting the non clogging submersible pump set electrically operated by 3.7 HP 3 Phase motor incl column pipe line
Dismantling of non clogging submersible pump of capacity 3.7 HP and taking out burnout winding from the stator of motor and rewinding with PVC copper wire
Dismantling of electric sewage induction motor 3.0 HP AC 3 phase 415 volts from site after disconnecting from pump
Dismantling Non clogging pump set of centrifugal type 3.0 HP induction motor AC 3 phase 415 volts
Dismantling of electric induction blower motor 5.0 HP AC 3 phase 415 volts for comprehensive maintenance from site after disconnecting
Dismantling of electric induction blower motor 30.0 HP AC 3 phase 415 volts for comprehensive maintenace from site after disconnecting from blower electric connection
Material and labour for PCC 1 3 6 type C2 using 40mm graded stone aggregate for foundation etc
M and L for taking out comprehensive maintenance of existing unserviceable Air Blower of any Make of capacity 125 Cubic Hr to 188 Cubic Hr with taking out of electric cable
Supply only Gear oil EP 90 complete all as specified and as directed by Engineer in Charge.
Supply only Air filter suitable for existing one complete all as specified and as directed by Engineer in Charge.
Supply only belt as per existing model complete all as specified and as directed by Engineer in Charge.
Supply only bearing as per existing complete all as specified and as directed by Engineer in Charge.
Supply only set of rotor with hub as per existing model complete all as specified and as directed by Engineer in Charge.
M and L for finding out defect of STPs panel and taking out burnt interconnection wiring including U.S and serviceable component for re use including rewiring of panel
Supply and fix in repairs flexible flat PVC copper couductor stranded submersible cable cores 1100 volt grade 4 Sqmm 3
7703587
GEM/2025/B/6107366
Two Packet Bid
Excavation in trenches in soft loose soil n exc 1.5 m wide and n. exc 1.5 m in depth for foundation
90 days
West Bengal; Hooghly
Total value wise evaluation
BOQ
5 documents required · 5 mandatory
2 yrs
30%
Exempted
30 May 2025
25 Apr 2025
17 May 2025
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Excavation in trenches in soft loose soil n exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc | Excavation in trenches in soft/loose soil n exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes etc. n. exc 10 sq m on plan and getting out, complete all as specified and as directed | 18 | Cum | [email protected] | 90 |
| 2 | Removing excavated materials n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point | Removing excavated materials n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point in soft/loose soil, complete all as specified and as directed. | 18 | Cum | [email protected] | 90 |
| 3 | Material and Labour for hardcore of broken stone or boulder of gauge exc 63mm but n. exc 75mm deposited spread | Material & Labour for hardcore of broken stone or boulder of gauge exc 63mm but n. exc 75mm deposited, spread & leveled in layers n. exc 15 cm thick watered & rammed to a true surface, complete all as specified and as directed. | 18 | Cum | [email protected] | 90 |
| 4 | M and L for Plain Cement Concrete type D2 1 4 8 using 40 mm graded stone aggregate as in foundation and mass filling | M&L for Plain Cement Concrete type D2 1 4 8 (using 40 mm graded stone aggregate) as in foundation and mass filling, complete all as specified and as directed. | 12 | Cum | [email protected] | 90 |
| 5 | M and L for reinforced cement concrete nominal mix type B 1 1 2 4 20 mm graded stone aggregate foundations including rafts | M&L for reinforced cement concrete (nominal mix) type B 1 1 2 4 (20 mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams bases for columns etc and mass concrete etc, complete all as specified and as directed. | 36 | Cum | [email protected] | 90 |
| 6 | Formwork to sides of concrete foundations footings bases of columns rafts and raft beams sides and soffits if any | Formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete, all as specified and as directed. | 96 | Sqm | [email protected] | 90 |
| 7 | M and L for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed | 540 | Kg | [email protected] | 90 |
| 8 | M and L brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1 6 all as specified and as directed. | M&L brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1 6, all as specified and as directed. | 36 | Cum | [email protected] | 90 |
| 9 | M and L for rendering 15 mm thick in CM 1 4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed. | M&L for rendering 15 mm thick in CM 1 4 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified and as directed. | 10 | Sqm | [email protected] | 90 |
| 10 | S and F Pre painted semi fully corrugated galvalume aluminium zinc coating AZ 150 GI based steel sheet 0.50mm thick | S&F Pre painted semi/fully corrugated galvalume aluminium zinc coating AZ 150 GI based steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall bent in curved shape, fixed to existing truss with self tapping screws, complete all as specified and as directed. | 558 | Sqm | [email protected] | 90 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7703587.pdf
GEM_BID
soc_26_2025-04-02-22-02-27_0b20a75c9e10d55ebf9338344197ab2a.pdf
BOQ
26_excel_2025-04-02-22-02-27_3e52c28fe2f5b381af7dba4017cf4c3d.csv
BOQ
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .