SPL REPAIR TO ROAD SIDE PATHWAY AND DRAINAGE SYSTEM OF WKSP COY EME UNDER GE (SOUTH) UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm and getting out in any type of soil in road side berms including all necessary cutting/ filling and finish to require level complete, all as specified and as directed by the Engr-in-Charge.

75 mm thick, Plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough , complete all as specified and as directed by Engr-in-Charge.

25 mm thick, Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Polished chequered cement concrete designer tiles 300 x 300 x 25mm thick, mixed grey cement (top 5mm of white cement delomite grit and approved colour) with two coats of laquer finish on top of tiles, including corner angles, etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles. The tiles shall be manufactured by using rubber moulds on vibrating table not hydraulicaly pressed complete, laid over and incl 20mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed by Engr-in-Charge. Make : Ultra tiles Pvt Ltd/ Bharat Tiles/ Regent tiles/ GICO.

Sand cushioning/ filling under floor or laying interlocking paver blocks including well ramming, complete all as specified and as directed by Engr-in-Charge.

Machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement. Shape shall be approved by Engr-in-Charge. (Make:ULTRA/MODERN/RUCHI/ISI Marked).

Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with burnt clay bricks of sub class 'B' bricks, complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

Rendering15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, finished fair and even , complete all as specified and as directed by Engr-in-Charge.

Preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide/ zink chrome primer complete all as specified.

Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete all as specified and directed by Engineer-in Charge.

Plain cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in surface channels and drains, complete all as specified and as directed by Engr-in-Charge.

Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over and including suitable primer complete all as specified and as directed by Engr-in-Charge.

paras ram pachiala

khajuria builders