PROVN OF PARKING SHED AT FORT AREA, NAGPUR.

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/loose soil complete all as specified and as directed.

M &L for Plain cement concrete in foundation filling type B-2 1:2:4 (40mm graded aggregate) and mass concrete complete all as specified and as directed.

M & L cement concrete tybe B- 1, 1:2:4 (20mm graded aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality complete all as specified and directed

M&L for Steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment grade Fe 410-W (Gde- E- 250) A quality complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S & F Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc complete all as specified and directed.

M&L for Excavating over areas, n exc 1.5 m deep and getting out Hard/Dense soil complete all as specified and as directed.

Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specifed and directed.

M&L for hardcore of gauge not exceeding 63mm (Broken stone or boulders ) ,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.

M & L Plain Cement concrete in sub bases/pavings Type D2 1:4:8 (40mm graded aggregate) all as specified and directed.

M&L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed.

M&L of Machine pressed precast conctete interlocking paver block colour glessy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ® with Grey cement and pigment complete all as specified and as directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified.

Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmwith soft/ loose soil complete all as specified and as directed.

Removing excavated material nexc. 50 m and depositing where directed at alevel n.exc 1.50m from staring level complete all as specified and as directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed.

M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint all as specified.

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/tirupati.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm,2 core including testing after laid and jointed all as specified and as directed

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No. 26 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

S&F durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen adn decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories and all as specified and directed. Make :- Jaquar/Syska/Philips/Holonix.

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 1.0 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : Jaquar/Syska/Philips/Halonix

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fix Modular Socket 6A 2/3 pin combined 2 module Make : Anchor Roma, Legrand, Crabtree

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. Make- Anchor Roma, Legrand, Crabtree.

Supply and fix MCB singlele pole & neutral 240 volt 6 to 40 amps 10 KA, C series complete all as specified and directed. Make:-Legrand, L&T, Havells

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, C Series complete all as specified and directed. Make:-Legrand, L&T, Havells

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Devika Constructions

vidhamal&sons

khushal constructions

M/S L M Chourasia

S D WAGHAMSHI

DEESHA CONSTRUCTIONS

M/s Jagdish Staioners and General Stores

M/s Shrangi Rishi Construction

M/s DS Khekde

M/s M.G. Hargunani

Bidder Name

M/s ABHIMAN HEGDE

M/s Shrangi Rishi Construction

S D WAGHAMSHI

M/S L M Chourasia

DEESHA CONSTRUCTIONS

khushal constructions

M/s DS Khekde

Devika Constructions

vidhamal&sons

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani