Spl repair to boundry wall at GASI of Fzr, Spl repair to boundary wall of BSO furniture yard and certain sanctioned works under GE(E) Ferozepur Cantt

Amount

M&L for excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft /loose soil. complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins,arches,pillars etc, complete all as specified and directed.

M & L for brick work with sub class `B' brick straight or curved on plan, exc 6 mtr mean radius built in Cement mortar (1:6) complete all as specified and directed.

All as per item 3 above but using old bricks retrieved from srl item No 2 above including cleaning and removal of mortar from old bricks etc complete all as specified and directed.

M&L removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and two coat of cement base paint complete all as specified and directed.

S&F Galvanised iron two strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm c/c spacing and straining and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, stapples or steel pin, complete all as specified and directed. Note : Each line of wire to be measured.

S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed ,drilling holes,notching for wires,etc,flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.complete all as specified and directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.

M&L for 75 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified and directed.

M&L for 25 mm thik Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast conctete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade. complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and directed.

M&L for hard core of gauge n exc 63mm, deposited spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface using broken brick bats complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 (40 mm graded stone aggregate) as in floor complete all as specified and directed.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia or bore complete all as specified and directed.

M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D-2 (40 mm graded stone aggregates) complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded crushed stone aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for Cement concrete 1:2:4 (type B-2 using 40 mm graded stone aggregate) in surface channels and drains Complete.

M&L for Glazed ceramic tiles in vertical surface (300x200mm) x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces.complete all as specified and directed.

M&L for Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick and including screed bed or bedding layers in CM 1:6 complete all as specified and directed.

M&L for mild steel TMT BAR 8mm dia and over, cut to length , bent to shape required incl cranking, bending for hooping for columns hooking ends and binding with and including mild steel wire(arrealed) not less than 0.9 mm dia or secruing with chips complete all as specified and directed.

S&F Rolled sections as in main pole and cross beams, hip and jack rafters; purlins whre connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for GI pipe 50mm dia medium grade for chinup bar pole complete all as specified and directed.

All as per item No 27 above but 30 mm dia dia medium grade for chinup bar beam complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed.

M&L for 40mm thick PCC( 1:2:4 )type B-0 (12.5mm graded stone aggregate) as in DPC including necessary form work . complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L for Factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

M&L for Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD over a coat of chalk whiting on plastered surfases complete all as specified and directed.

Demolition of concrete in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L 50mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate Finished even & smooth without using extra cement complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed bed or bedding layer in CM(1:4) complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

All as per item No 41 above but size exceeding 1.5 Square metre and not exceeding 4 Square metre each. complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded crushed stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

M&L Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified and directed.

S&F for 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face supplied and fitted to chowkats complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled 100mm long complete all as specified and directed.

S&F mild steel anodized barrel tower bolts, extruded section 200mm long. complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium sliding door bolt 300mmlong, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate. complete all as specified and directed.

S&F Aluminium anodized handles, cast type, 150mm long complete all as specified and directed.

M & L preparation of New wooden surface & applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm with or girth complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Mild steel framed work as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified and directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair GI wire cloth 0.56mm nominal dia of wire and avge width of aperture 1.18mm. complete all as specified and directed.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering/plastering, 15mm thick in cement mortar (1:4) on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- (WPC shall be measured and paid separately)

M&L Preparation of new plastered surfaces and applying two coats of cement base paint on walls as in normal/ camouflage pattern including one base coat of white wash etc. complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & labour for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but nexc 0.18 Sqm,in vertical surfaces such as dados, skirting etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces . complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size with or without swivel point any size including steel pipes or union complete all as specified and directed.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 290 and E-165 complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, Shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc. 25cm soft/loose soil. complete all as specified and directed.

M/L for cement concrete in foundation,filling and mass concrete type D2 1:4:8 (40mm graded stone aggregate). complete all as specified and directed.

S&F Steel work in tabular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

S&F Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L PVC wall lining consisting of 5mm thick hollow sandwich pannel plain/wooden grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

M&L 5mm thick PVC fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and directed.

M&L for Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F anodised aluminium powder coated frame for doors,windows,ventilators with one or more rebated incl joining cleat for fixing etc. complete all as specified and directed.

S & F Anodiesed aluminium powder coated door shutters aluminimum section weighing 0.55 Kg/m incl necessary joining cleats glazing clips, rubber neoprene packing, handles 2 nos in each doors, hinges, anodiesed aluminium snap beading screw etc complete all as specified and directed.

S&F 6.3 mm thick sheet glass, ordinary quality in Aluminium door with solar control film 50 micron in squares exc 0.5 sqm each pane complete all as specified and directed.

5mm thick PVC plain colour pvc sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Linning, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent Cement and fixing at site. complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring ,overall length of cover plate 150mm,fixed in floor ,complete all as specified and directed.

S&F Aluminium hinges powder coated , 100 mm long and fixed with steel screws complete all as specified and directed.

S&F Brass mortice lock 75 mm,4 levers, vertical type, fixed to cupboard shutters, complete all as specified and directed.

S&F Hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg etc, complete all as specified and directed.

S&F Aluminium tower bolts powder coated , 150 mm long and fixed with steel screws, complete all as specified and directed.

S&F 4mm dia galvanised iron or steel wire for FMN (Net Mosquitoes) complete all as specified and directed.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in Lime or sand stone complete all as specified and directed.

Refastening and securing ends of balusters, newels, rag bolts, etc., let into stone and grouted in cement mortar including recutting the mortices and regrouting in cement mortar complete all as specified and directed.

Mild steel rag or lewis bolts, dia of neck 20mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 30 cm long complete all as specified and directed.

M&L for preparation new plastered surfaces and applying two coats of cement base paint on external surface over a coat of alkali resistant primar on wall complete all as specified and directed.

M&L cement concrete type B1 (1:2:4) using 20 mm graded crushed stone aggregate as in filling of hold fast rounded or chamfered on edges incl necessary formwork. complete all as specified and directed.

Fair cutting exc 10cm width or girth on exposed surfaces of brickwork as to fire place apertures, splayed angles, weathering, cornices, groins, etc. including rubbed finish and waste straight or raking cutting complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, partially immersed in wall, SPN DB with 200 Amps rated bus bar, 4 way, 240 volts, dust and vermin proof, suitable for incorporation of MCBs (MCB SPN/ MCB SP), including making good distrubbed surfaces with matching colour, complete all as specified and directed. . Make- HPL/ Indoasian/ C&S/ Legrand/ Havells as approved by GE

S&F MCB SPN, 40 Amps, 240 volts, "B" curve, 10KA duly ISI marked, complete all as specified and directed. . Make- HPL/ Indoasian/ C&S/ Legrand/ Havells as approved by GE

S&F MCB SP, 06 to 32 Amps, 240 volts, "B" curve 10 KA duly ISI marked, complete all as specified and directed. Make- HPL/ Indoasian/ C&S/ Legrand/ Havells as approved by GE

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 6 Sqmm nominal cross section, 3 core, Circular, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified and directed. . Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following : (a) One light point controlled by one single pole one way switch.

A ll as per item No 103 above but one 3 pin 5 Amp socket outlet point controlled by one switch on same board.

S&F Switch piano flush type 5 amps, single pole one way duly ISI marked. Make-Anchor/ Cona/ Plaza/ Indoasian as approved by GE

S&F Socket outlet 2 in 1, 3 pin , 5 Amps, duly ISI marked. Make-Anchor/ Cona/ Plaza/ Indoasian as approved by GE

S&F Ceiling rose surface type, bakelite 65 x 50mm, 3 terminals duly ISI marked. Make-Anchor/ Cona/ Plaza/ Indoasian as approved by GE

S&F Lamp holder PVC/ Polycarbonate type with cord grip cap suitable for pendant / batten/ angle holder fitting complete all as specified and directed. Make-Anchor/ Cona/ Plaza/ Indoasian as approved by GE

S&F LED bulb of 10 watt all complete all as specified and directed. and directed. Make-Havells, Model No-LED ADORE 10W B22 CDL BALL LAMP or other equivalent makes as approved by GE.

S&F LED 20 W LED 6000 K, indoor E-Lite LED Curve with wide angle profile High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete all as specified and directed. . Make-Havells, Model-E-Lite LED Curve (LHEXBXPNIN1W020) or Equivalent of Philips/C&S as approved by GE

M&L for PCC 75 mm thick type B - 1, 1:2:4 (20 mm graded agg.)

S S BUILDERS

KAMALJIT SINGH CONTRACTOR

Bhupindra Traders

manoj and company

M/s Mukand Lal Khanna

VRTRADERS

M/s Bansi Lal

GS and Co