Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.8 CrAccepted-Finance | ₹46.8 Cr | L1 | Accepted-Finance L1 |
| 2 | L2₹47.4 CrRejected-Finance | ₹47.4 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹56.1 CrRejected-Finance 331 13 3RD FLOOR NAKO BUILDING OPPOSITE RTO OFFICE SAULI KHAD DISTT MANDI 175001 | MANDI | MANDI | HIMACHAL PRADESH | 175001 | ₹56.1 Cr | L3 | Rejected-Finance L3 |
| 4 | L4₹56.7 CrRejected-Finance KHALINI DISTT SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | ₹56.7 Cr | L4 | Rejected-Finance L4 |
Updated dates
Tender Value
₹55.8 Cr
EMD Value
₹65.8 L
Closing Date
23 Feb 2026, 10:30 amClosed
Executive Engineer
Executive Engineer HPPWD Division Nadaun
(Part-1) C/O Building Portion, WS SI, Septic Tank, Rain Water Harvesting Tank, Site Development and approach road). (Part-II (Electrical Works) (SITC Electrical Installation, lifts, Addressable Fire Alarm, fire fighting system, MGPS system, Solar P
2025_PWD_122867_2
Construction of Mother Child Hospital at Dr. Radha Krishanan Medical College Hamirpur at Jolsappar
Open Tender
Civil Works - Buildings
540 days
Nadaun
Please refer Tender documents.
16 documents required · 16 mandatory
₹60,000
EE Nadaun
₹65.8 L
Chief Engineer (HZ) HPPWD Hamirpur
25 Mar 2026
5 Feb 2026
23 Feb 2026
5 Feb 2026
23 Feb 2026
5 Feb 2026
10 Feb 2026
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains for all kinds of soil and ordinary rocks including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Cutting in earth work by mechanical means in all heights and depths in blasting work in hard rock with chiseling and wedging out of rock ( where blasting work is prohibited) and their intermediate classifiction of soils including, dewatering wherever required, setting of the required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site( to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transportion including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools , equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent . Any loss to the public and private property, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Stone filling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical hammer or by hand durmoot to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of 1:2:4 (One cement : Two coarse sand) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size for all work up to plinth level excluding the cost of centering and shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying damp-proof course 50mm ( fifty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimetre) nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Random rubble masonry / polygonal uncoursed/ brought to courses with hard stones of approved quality in superstructure above plinth level upto all floor level including leveling up with cement concrete 1:6:12 ( one cement: six coarse sand : twelve graded crushed stone aggregate ) 20mm ( twenty milimetre ) nominal size at window sills, ceiling level and the like at plinth level in cement mortar 1:6 ( one cement: six coarse sand ) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.
Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with mimimum cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access plat form including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Shelves (Cast in situ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Stairs (excluding landing) except spiral stair case including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Small lintels not exceeding 1.5 m( one Point five metre ) Clear span modelling as in cornies window sills, string coures, bands, coping, bed plates, anchor blocks and the like including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slab and break in floors and walls under 20cm (twenty centimetre) wide including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Square rubble mansory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimetre nominal size) upto plinth level with cement mortar 1:6 (one cement :six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:4 (one cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Brick work with common burnt clay 23cm (twenty three centimetre) thick Rat Trap bond F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all levels. Granite of any colour and shade on Area of slab over 0.50 sqm (zero point five zero square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing 20mm ( twenty millimetre) dia curtain rods of 1.25 mm (one point twenty five millimetre) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etcetera wherever necessary complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing M.S. grills of approved pattern in frames of windows etcetra with M.S. flats, square or round bars etcetera including priming coat with approved steel primer all complete fixed to steel window/ wooden frame by welding/ rawl plugs/ screw etcetra upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimetre to one thousand millimetre)), with double speed adjustment with necessary accessories and screws etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size. aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 200x10mm (Two hundred into ten millimetre) nominal size aluminium tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providng and fixing 125mm ( one hundred twenty five millimetre)aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providng and fixing 100mm ( one hundred millimetre) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing angle iron cup board frames manufactured from M.S. angle iron section 25x25x5mm ( twenty five into twenty five into five millimetre) thickness including hinges jamb lock, jamb beed and if required angle thrashold of mild steel angle 25x25mm ( twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means , lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately) upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 19mm (ninteen millimetre) thick waterproof termite resistant commercial board shutters ply bonded Action TESA / Green Ply/ Kit Ply/ Century Ply make of ISI (Indian Standards Institute) Marked IS-1659 (Indian Standard - one thousand six hundred fifty nine) of uniply, green ply shutter and shelves box including vertical portion and shelves. The back side of cupboard/cabinet work shell have 6mm (six millimetre) thick water proof ply and all cut portion sheel be finished with 6/12mm (six oblique twelve millimetre) thick hard wood edging including all wood work of cubboard and cabinets from finished with synthentic enamel paint of approved shade and sample etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 1.00 mm ( one millimetre) thick decorative high pressure Laminated Sheet of Greenlam/ Century ply / Kit ply make plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 (Indian Standred two thousand forty six) Type S, including cost of adhesive of approved quality complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing 50mm (fifty millimetre) special quality bright finished brass cupboard or ward robe locks with six levers of approved quality including necessary screws etcetera complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing 50mm (fifty millimetre) bright finished brass cupboard or ward robe knob of approved quality including necessary screws etcetera complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing power coated aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of (JINDAL/HINDALCO/BALCO) of approved make conforming to IS 733 (Indian Standred seven hundred thirty three) and IS 1285 ( Indian Standred one thousand two hundred eighty five)anodised transparent or dyed to required shade according to IS 1868(Indian Standred one thousand eight hundred sixty eight). (Minimum anodic coating of grade AC 15(fifteen)) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including least angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 12 mm (Twelve millimetre) thick prelaminated MDF board both side BWP phenol bounded shutter including bright finished,black enamelled iron butt hinges with screws and frame of first class deodar wood for door including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing factory made uPVC white colour fixed glazed windows, ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point sixty plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetera Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .
Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm(fifteen into three millimetre) and nuts and bolts complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Structural steel work(TATA/SAIL/Apollo/JSW Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. In trusses and trussed purlins in building complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing M.S. fan clamp type I or II of 16 mm (sixteen millimetre) dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing MS railing for stair case (Apollo/Jai Bharat/Tata ) having balluster of 19mm x19mm (Ninteen millimetre into ninteen millimetre) square bar with a clear height of 85cm (Eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (Forty millimetre into six millimetre) size complete with a applying priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing toughened glass with Stainless Steel hand rail with approved drawing. Providing and fixing SS hand rail for stair case having balluster of square bar with a clear height of 85cm(eighty five centimetre) embedded in cement concrete steps as per drawing specification and as per direction of Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing 40x5 mm (Forty into five millimetre) flat iron hold fast 40 cm (Forty centimetre) long including fixing to frame with 10 mm (Ten millimetre) diametre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement : three coarse sand : six graded stone aggregate) 20mm (Twenty millimetre) nominal size including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and laying Cheema pink Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying 25 mm (Twenty five milimetre) thick Kota stone slab flooring with 20mm (twenty millimetre ) thick base of cement mortor 1:4 (one cement : four coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and laying Kota Stone 25mm ( twenty five millimetre) thick mirror polished in uniform colour 55x55cm ( fifty five into fifty five centimetre) minimum size flooring, 20mm ( twenty millimetre) average thick base of cement mortar 1:4 ( one cement : four sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete as approved pattern finish upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying Kota stone having size 55x15cm ( fifty five into fifteen centimetre) mirror polished in uniform colour slab 25mm ( twenty five millimetre) thick in risers of steps, skirting dado and pillars laid in 12mm ( twelve millimetre) thick in cement mortar 1:3 (one cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying double charged vitrified floor tiles of size 600x1200 mm (six hundred into one thousand two hundred millimetre) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying Vitrified tiles in sizes 600X600 mm (six hundred into six hundred millimetre) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 3mm (three millimetre) thick PVC (polyvinyl chloride) antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
40 mm (forty millimetre) thick fine dressed red sand stone flooring over 20mm (twenty millimetre) (average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flush complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
6mm(six millimetre)thick white glazed tiles dado(30X45cm) (thirty into forty five centimetre) in skirting riser of steps and dado 12mm(twelve millimetre)thick cement mortar 1:3( one cement : three sand) and jointed with cement slurry complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm (zero point fifty five millimetre) thick) having a knurled web of 51.55 mm (fifty one point fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten point fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimetre channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero point fifty millimetre) and web of length 27 mm (twenty seven millimetre). Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C (at the rate six hundred ten centre to centre) with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm (twenty millimetre) countersunk ribbed head screws @ 200 mm C/C (at the rate two hundred millimetre centre to centre) all complete as per the drawing and directions of Engineer-in-Charge, the joints of the boards are finished with specially formulated jointing with Pine wood complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing coupler 110mm(One hundred ten millimetre) Size Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Single Pushfit Coupler 110mm (One Hundred ten millimetre) dia Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Bend 110mm(One hundred ten millimetre) Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:4 ( one cement : four coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6 mm (six millimetre) cement plaster of mix in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Distempering with Oil Bound Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Finishing walls with Antibacterial dust resisitant washable emulsion paint having VOC less than 50(fifty) gram/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali and fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gram/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali and fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Finishing walls with water proofing cement paint of required shade New work (two or more coats @ 3.84 kg/10 sqm (three point eight four kilogram per ten square metre) (Asian/Nerolac/ICI Dulux) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Constructing course rubble hammer dressed ‘U’shape open surface drain with side wall 15x22 cms (Fifteen into twenty two centimetres) in cement mortar 1:6 ( One cement : six course sand) and inside plastering with cement plaster 1:3 ( One cement : three course sand) including earth work and laying 10cm (Ten centimetres) cement concrete in 1:5:10 ( one cement : five course sand : ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size) and 7.5 cm (Seven point five centimetres) cement concrete 1:2:4 ( One cement : Two course sand : four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size and finished with a floating coat of neat cement complete as per standard design including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:1½:3 (one cement : one and half coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm (zero point fifty five millimetre) thick) having a knurled web of 51.55 mm (fifty one point fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten point fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimetre channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero point fifty millimetre) and web of length 27 mm (twenty seven millimetre). Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C (at the rate six hundred ten centre to centre) with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm (twenty millimetre) countersunk ribbed head screws @ 200 mm C/C (at the rate two hundred millimetre centre to centre) ., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing 8mm(eight milimetre) thick fiber cement board complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm (zero point fifty five millimetre) thick) having a knurled web of 51.55 mm (fifty one point fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten point fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimetre channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero point fifty millimetre) and web of length 27 mm (twenty seven millimetre). Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C (at the rate six hundred ten centre to centre) with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm (twenty millimetre) countersunk ribbed head screws @ 200 mm C/C (at the rate two hundred millimetre centre to centre) ., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing : GRC JALI Cladding complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Float glass panes of nominal thickness 4mm ( four millimetre) make of Modiguard, Saint Gobain, Asahi (weight not less than 10kg/sqm (ten kilogram per square metre) for renewing glass panes with putty and nails wherever necessary including racking out the old putty complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and laying Terracotta / Clay tile of approved shade, laid on 20 mm (twenty milimetre) thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm(three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etcetera complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying 60mm (sixty millimetre) thick factory made cement concrete interlocking paver block of M -30 (M- thirty) grade made by block making vibratory compaction, of approved size, design and shape, laid machine with strong in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetera all complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm (zero point four eight eigth killogram per square metre) mixed with water proofing cement compound @ 0.253 kg/sqm. (zero point two five three killogram per square metre). (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (ten centimetre). (c) third layer of 1.5 mm(one point five millimetre) thickness consisting of slurry of cement @ 1.289 kg/sqm(one point two eight nine killogram per square metre) mixed with water proofing cement compound @ 0.670 kg/sqm(zero point six seven zero killogram per square metre) and coarse sand @ 1.289 kg/sqm.(one point two eight nine killogram per square metre) This will be allowed to air cure for 4(four) hours followed by water curing for 48(forty eight) hours. The entire treatment will be taken upto 30 cm(thirty centimetre) on parapet wall and tucked into groove in parapet all around including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 12mm (twelve millimetre) thick green chalk board (non magnetic with superior quality)framing specially Andoised Aluminium profile 20x15mm (twenty into fifteen millimetre) with corners of black surface shall be non porous ceramic particles on the top green surface for smooth writing with chalk over 11mm (eleven millimetre) thick particle Board whick shall have backing material of galvaniised sheet 0.28mm (zero point twenty eight millimetre) thick aproxx. The board shall befixed on the wall with soecially designed J clump and square clump with the help of Nylon Shelve & screws as per site requirement complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and Placing Airport chair made of approved manufacturer in waiting area complete as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Constructing soak pit 1.20x1.20x1.20x1.25mm (One point two zero into one point two zero into one point two zero into one point two five millimetre) filled with brick bats including S.W. drain pipe 100mm (One hundred millimetre) and 1.20m (One point two zero metre) long as per design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC Cowl for ventilating pipe (Finolex/ Supreme/D-Plast make) confirming to IS 13592 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5(two point five) circular shape 450 mm (four hundred fifty millimetre)internal diametre complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying M-20 (twenty) design mix cement concrete and curing complete including the cost of framework for plain/reinforced concrete in retaining walls, breast walls, as per drawing and HP. PWD technical specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(seventy five millimetre) dia diametre on wall face unplasticised Rigid PVC rain water pipes in weep hole conforming to IS : 13592 (indian standred:thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382, (indian standard:five thousand three hundred eighty two) leaving 10 mm(ten millimetre) gap for thermal expansion, Single socketed pipes complete for all floors including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and fixing 110mm(one hundred ten millimetre) dia diametre on wall face unplasticised Rigid PVC rain water pipes in weep hole conforming to IS : 13592 (indian standred:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382, (indian standard:five thousand three hundred eighty two) leaving 10 mm(ten millimetre) gap for thermal expansion, Single socketed pipes complete for all floors including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five metre), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty metre) : Pipes, cables etcetera not exceeding 80 mm(eighty millimetre) dia. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing counter top wash basin with C.I. brackets, 15mm (fifteen millimetre) C.P. brass pillar taps, 32mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a pair of 15 mm (fifteen millimetre) C.P. brass pillar taps complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china pedestal type water closet (European type of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto all floorlevel including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin (CERA, Parryware, Hindware, Sanitaryware) of 430x260x350 mm( four hundred thirty into two hundred sixty into three hundred fifty millimetre)and 340x410x265 mm(three hundred forty into four hundred ten into two hundred sixty five millimetre) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors whereve: One urinal basin with 5 litre(five liter) white P.V.C.(Polyvinyl chloride) automatic flushing cistern including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/ Parryware/ Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm ( Six hundred thirty into four hundred fifty millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 510x1040mm (five hundred ten into one thousand forty millimetre) bowl depth 250mm (Two hundred fifty millimetre) Stainless Steel AISI 304 (18/8) Double bowl Kitchen Sink of Diamond ( DUPLEX 5220 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera complete including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing CP brass toilet paper holder 1151N complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm(One hundred ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(Seventy five millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(Seventy five millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110 mm (One hundred ten millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75 mm (Seventy Five millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm(one hundred ten millimetre) dia. PVC(Polyvinyl chloride) single equal branch plain , ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(seventy five millimetre) dia.PVC(Polyvinyl chloride) single equal branch plain , ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm(one hundred ten millimetre) dia. PVC(Polyvinyl chloride) double equal branch ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(seventy five millimetre) dia.PVC(Polyvinyl chloride) double equal branch ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm(one hundred ten millimetre) dia. PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm(seventy five millimetre) dia.PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providng and fixing 110mm(one hundred ten millimetre) dia. PVC (Polyvinyl chloride) plain bend ISI(Indian Standards Institute.) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providng and fixing 75mm(seventy five millimetre) dia PVC (Polyvinyl chloride) plain bend ISI(Indian Standards Institute.) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 110x75mm ( One hundered ten into seventy five millimetre) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 600 mm (six hundred millimetre) long towel rail with total length of 645 mm,(six hundred forty five millimetre) width 78 mm(seventy eight millimetre) and effective height of 88 mm,(eighty eigth millimetre) weighing not less than 190 gms.(one hundred ninety grams) PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) : including cost of cutting and making good the walls and floors complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 1216 (16mm OD ) pipe(one thousand two hundred sixteen) (sixteen millimetre outer diametre.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic bend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 1620 (20 mm OD ) pipe(one thousand six hundred twenty) (twenty millimetre outer diametre.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic bend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 15 mm (fifteen millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetera Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 20 mm (twenty millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetera Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Making connection of G.I. distribution branch with G.I. main of size 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipe (TATA/JINDAL (Hissar), Tata Steel Tubes Ltd, Prakash Surya, B.S.T.) etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Fixing water metre and stop cock 200 mm(two hundred millimetre) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etcetera complete ( cost of water metre and stop stop cock to be paid seprately) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 20mm (Twenty millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 25mm (Twenty five millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty millimetre) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 15mm (Twenty millimetre) nominal bore C.P. brass bib cock of Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware conforming to IS standards and weighing not less than 690 gms (six hundred ninety grams) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock of Jaquar ( CON-059 KN ) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT Soap Dish Holder make of Prayag having length of 138mm,( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ), height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jaquar/ CZAR/Cera make (OPAL Series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing weep holes in brick masonry / plain / reinforced concrete abutment, wing wall./return wall with 110mm (One hundred ten millimetre) dia PVC pipe, extending through the full width of the structure with slope of IV :20H (twenty horizontal) towards drawing face, complete as per drawing and MORTH technical specification.clause 2700 & 2200 (Two thousand seven hundred and two thousand two hundred) as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment , wing wall , return wall to the full height , comacted to firm condition complete as per drawing and technical specification clause 1204.3.8 (one thousand two hundred four point three point eight) including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera up to floor five level, excluding the cost of centering, shuttering and finishing :1:5:10 (one cement : five coarse sand) : ten graded stone aggregate 40 mm ( forty millimetre) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
Back filling behind abutment, wing wall and return wall with Granular material complete as per drawings and Technical Specification Clause 1204.3.8 (one thousand two hundred four point three point eight)and as per the direction of the Engineer-in-Charge including carriage of material through all modes of transportation within all leads and lifts and other incidentals.The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing and laying at or near ground level factory made kerb stone of M-25(M-twenty five) grade cement concrete in position to the required line, level and curvature,j ointed with cement mortar 1:3 (one cement: three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm (five millimetre), including making drainage opening wherever required complete etcetera as per direction of Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Loosening of the ground upto a level of 300 mm (three hundred millimetre) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 (three hundred point one) and 300.2 (three hundred point two) for subgrade construction as per Technical Specification Clause 303.5.2(three hundred three point five point two). Both side shoulder. Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads,transporting to site ,sprteading, aggrading to require slope and compacted to meet requirement of Table 300.2 (three hundred point two) with lead upto 1000 m (thousand metre) as per Technical specification Clause 303.1 (three hundred three point one), including carriage of material through all modes of transportation with in all leads and lifts ,as per PWD specifications and as per direction of the Engineer-in -Charge.The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Construction of granular subbase by providing well graded material, mixing in a mechanical mix plant at OMC ( Optimum moisture content), carriage of mixed material to work site upto lead of 1000 m (one thousand metre) spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per Technical for grading I material Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC (optimum moisture content )in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN(eighty to one hundred kilonewton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetera as per Tables 400.11 (four hundred point one one ) & 400.12 (four hundred point one two) and Technical Specification Clause 406(four hundred six ).Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (zero point seven zero - one point zero kilogram per squaremetre) using mechanical means as per Technical Specification Clause 502 (five hundred two ).Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg/sqm (zero point two five to zero point three zero kilogram per square metre ) on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per Technical Specification Clause 503 (five hundred three). Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing and laying surface dressing as wearing course consisting of a layer of bituminous binder laid on the prepared surface, followed by a cover of crushed stone aggregates of specified size and rolling with three wheel 80-100 kN(eighty to one hundread kilonewton) static roller including cleaning the road surface as per Technical Specification Clause 507(five hundread seven).Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
Providing and Laying bituminous concrete with 100-120 (one hundred - one hundred twenty )TPH batch type hot mix plant producing an average output of 75 (seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5(at the rate five point five) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine) completein all respects .Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government.
PART-II (Electric Installtion)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm (one point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit along with heavy accessories ISI marked with , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm (one point five square millimetre). FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Er-In-Charge Group C
Wiring for twin control light point with 1.5 sq.mm (one point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC Conduit along with heavy accessories having , 2 (two) way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm (one point five square millimetre). FRLS PVC insulated copper conductor single core cable etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Er-In-Charge
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm (one point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit heavy duty along with heavy accessories ISI marked, and earthing the point with 1.5 sq. mm (one point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make of switches :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius).Make of wire.:- KEI, Finolex, Polycab . Make of conduit :- Diplast/BEC/AKG as approved by Er-In-Charge :Group c
Calling Unit : SITC of Patient Station Modules (Bedside) wired Call Unit, wall or Bedhead panel mounted, with call button, cancel, LED lamp for status indicator with red color LED lamp. Bed unit supports Cat 6 (six) or 2 (two) pair wire including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Rauland/ Notifier/ Ametek/ Afcon/SCHRACK/ Eurotronikas per approved by Engineer-in -charge .(five year warranty )
SITC of Handheld remote with spiral cord attached to bed side with 2.5 mtr (two point five metre) coil cord stranded copper conductor PVC cable, comprising of call button and red LED indicator (OPTIONAL) including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Rauland/ Notifier/ Ametek/ Afcon/SCHRACK/ Eurotronikas per approved by Engineer-in -charge .(five year warranty )
SITC of Digital nurse station with LED numeric 7 (seven) seg display indication (up-to 3 (three) characters), buzzer etc as per specifications. Bright red color numeric's, sweet ding dong sound on call press. Display has the provision of displaying multiple call request at the same time. Panel/console source by 230V (two hundred thirty volt) including five year warranty petty purchase to complete the job as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Rauland/ Notifier/ Ametek/ Afcon/SCHRACK/ Eurotronikas per approved by Engineer-in -charge .(five year warranty )
20 (twenty) user display
15 (fifteen) user display
10 (ten) user display
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
5/6 amp (five / six ampere) Modular switch
5 (five) pin 5/6 amp (five / six ampere) socket outlet
Modular Blanking Plate
Supplying and fixing RJ 45 (forty five) JACK including connections but excluding modular plate etcetera as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 (five) pin 5/6 amps (five / six ampere) modular socket outlet and 5/6 amps (five / six ampere) modular switch, connection etc. as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos.(two number) 3 (three) pin 5/6 amps (five / six ampere) modular socket outlets and 2 nos ( two number) 5/6 amps (five / six ampere) modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 (six) pin 5/6 and 15/16 amps (five / six and fifteen / sixteen ampere) modular socket outlet and 15/16 amps ( fifteen / sixteen ampere) modular switch, connection etcetera as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 (six) pin 5/6 and 15/16 amps (five / six and fifteen / sixteen ampere) , 3 (three) pin 5/6 amp (five / six ampere) modular socket outlet and 15/16 ( fifteen / sixteen ampere) amp and 5 /6 amp (five / six ampere) modular switch, connection etetera as required..Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge(five year warranty ).
Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 2(two) nos 6 (six) pin 5/6 (five / six ampere)& 15/16 amps (fifteen / sixteen ampere)modular socket outlet and 2 (two) nos , 15/16 amps (fifteen / sixteen ampere) modular switch, connection etc. as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3nos.(three number) 3(three) pin 5/6 amps (five / six ampere) modular socket outlets and 3 nos 5/6 amps (three numbers five / six ampere) modular switches and 1 nos. 3 pin 15/16 amps (one numbers three pin fifteen / sixteen ampere) modular socket outlets and 1 nos 15/16 amps (one number fifteen / sixteen ampere)modular switche , connection etc. as required. (For light plugs to be used in non residential buildings).Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Supplying and fixing following size/modules,G.I box in recess/surface etc.as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge : 3 (three) module metal box
Supplying and fixing Computer board comprising 3 nos 5 amp (three numbers five ampere) modular switches & Sockets , G.I box 2 (two) module for jack box and G.I Box 12 (twelve)module for 5 amp (five ampere) switchs and 5 amp (five ampere) sockets comprising sheet cover for each 2 (two) module metal box , one no computer jack (RJ-45)with shutter including connections etc as required.Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge.(five year warranty )
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit ISI marked along with heavy accessories as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- KEI/Anchor/Polycab/Finolex as approved by Engineer -in -charge .
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (two into one point five square millimetre plus one into one point five square millimetre)
2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire (two into two point five square millimetre plus one into one point five square millimetre)
2 X 4 sq. mm + 1 X 4 sq. mm earth wire (two into four square millimetre plus one into four square millimetre)
2 X 6 sq. mm + 1 X 6 sq. mm earth wire (two into six square millimetre plus one into six square millimetre)
2 X 10 sq. mm + 1 X 6 sq. mm earth wire (two into ten square millimetre plus one into six millimetre)
2 X 16 sq. mm + 1 X 6 sq. mm earth wire (two into sixteen square millimetre plus one into six square millimetre)
4 X 10 sq. mm + 2 X 6 sq. mm earth wire (four into ten square millimetre plus two into six square millimetre)
4 X 16 sq. mm + 2 X 6 sq. mm earth wire (four into sixteen square millimetre plus two into six square millimetre)
4 X 25 sq. mm + 2 X 6 sq. mm earth wire (four into twenty five square millimetre plus two into six square millimetre)
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-KEI,Finolex ,polycab as approved by Er-In-Charge
3 x 1.5 sq. mm (three into one point five square millimetre)
3 x 2.5 sq. mm (three into two point five square millimetre)
3 x 4 sq. mm (three into four square millimetre)
Supplying and fixing of following sizes of Heavy class FRLS PVC Conduit along with heavy accessories in surface/recess including cutting the wall and making good as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Diplast/BEC/Polyfit or as approved by Er-In-Charge(for Networking, CCTV, Fire alarm etc.)
25 mm (twenty five millimetre)
50 mm (fifty millimetre)
100 mm (one hundred millimetre)
Providing and Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable,IS 7098 (Indian standard seven zero nine eight) 1.1 KV (one point one kilo volt) grade of following sizes on wall surface with appropriate size lugs, glund as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-KEI,POLYCAB, havells ,finolex as approved by Er-in-charge.(five year warranty )
6 sqmm (2 core) (six square millimetre (two core))
25 sqmm (3.5 core) (twenty five square millimetre (three point five core)
35 sqmm (3.5core) (thirty five square millimetre (three point five core)
70 sqmm (3.5core) (seventy square millimetre (three point five core)
95 sqmm (3.5core) (ninty five square millimetre (three point five core)
185 qmm (3.5core)(one hundred five square millimetre (three point five))
150 qmm (3.5core)(one hundred fifty square millimetre (three point five core)
240 qmm (3.5core) (two hundred fourty square millimetre (three point five core)
300 qmm (3.5core)(three hundred square millimetre (three point five core)
Providing and Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV (one point one kilo volt) grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-KEI,POLYCAB, havells ,finolex as approved by Er-in-charge(five year warranty )
6 sqmm (2 core) (six square millimetre (two core)
300 qmm (3.5core) (three hundred square millimetre (three point five core)
Supplying and fixing Ding Dong bell suitable for single phase, 230 (two hundred thirty) volts, complete as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Er-In-Charge (five year warranty )
Providing, Installation, testing and commissioning of BLDC ceiling fan including five year warranty with socket type 2 (two) module regulator/remote ,including wiring the down rods of standard length (up to 30 cm (thirrty centimetre)) with 16/0.20 mmt (sixteen / zero point twenty millimetre) win twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.Five star rating including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Usha (Technoaire BLDC without remote),Bajaj,Crompton as approved by Er-In-Charge(FIVE YEAR WARRANTY) : ( Ceiling Fan 1200 mm (one thousand two hundred millimetre) sweep
Supplying and fixing extra conduit down rod of 60cm (sixty centimetre) length G.I. pipe 15 mm (fifteen millimetre) dia, heavy gauge including painting etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(Note : More than 5 cm (five centimetre) length shall be rounded to the nearest 10 cm and 5 cm (ten centimetre and five centimetre) or less shall be ignored).
Providing and installation exhaust fan with five year warranty of 300 mm (three hundred millimetre) (Plastic body) size in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Usha,Bajaj,Crompton as approved by Er-in-charge.
Providing and installation exhaust fan of 300mm (three milllimetre) (L/D) size in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required: including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Usha/Bajaj/Crompton as approved by Er-in-charge(Five year warranty)
Providing and installation exhaust fan of 300 mm (three millimetre) (H/D) five year warranty size in the existing opening,including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Usha,Bajaj,Crompton as approved by Er-in-charge(Five year warranty)
Providing, Installation, testing and commissioning of wall fan of aluminium blades ,rust free, following size by means of suitable rag-bolt/ nuts, connections, testing and commissioning etc. as required complete in all respects to the best satisfaction of Engineer-in-charge .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(Five year warranty) : (Wall Fan 400 mm (four hundred millimetre) sweep
Supply and fixing of mirror light IP20 (twenty ) 10 (ten) W+/- 1W with Surface Mounted with aluminium housing and Polycarbonate diffuser,minimum system efficacy of ≥120 lm/W with P.F.>0.95 with THD<20% ,CCT6500 K,CRI 80,Surge Protection 2 Kv, IP20. The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (seventy). The Input voltage range shall be 150V to 270V (one hundred fifty voltage to two hundred seventy voltage) ,complete with all accessories, connections, testing and commissioning etc.as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge.( Five year warranty)
Supply and fixing of IP40 Led fixture 40 (forty) W+/- 1W with Surface Mounted 4 (four) Feet with Polycarbonate diffuser with aluminium housing having minimum system lumen efficacy of ≥120 (one hundred twenty) lm/W with minimum system lumen output 4400 (four thousand four hundred) lumens with P.F.>0.95 ( zero point nine five) with THD<10% ( ten percent),CCT 5700 (five thousand seven hundred) K, CRI 80 (eighty),Surge Protection 3 (three) Kv .The LEDs with minimum life of 75000 (seventy five thousand) burning hours. The Input voltage range shall be 150V to 270V (one hundred fifty voltage to two hundred seventy voltage) complete with all accessories, connections, testing and commissioning etc.as required with five year warranty. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge. (five year warranty )
Supply and fixing of LED 45 (forty five) W+/- 1W Clean light with Surface Mounted 4 (four) Feet with Polycarbonate diffuser with aluminium housing having minimum system lumen efficacy of ≥120 (one hundred twenty) lm/W with minimum system lumen output 4400 (four thousand four hundred) lumens with P.F.>0.95 (zero point nine five)with THD<10% (ten percent),CCT 6500 (six thousand five hundred) K, CRI 80 (eighty),Surge Protection 3(three) Kv .The LEDs with minimum life of 75000 (seventy five thousand) burning hours. The Input voltage range shall be 150V to 270V (one hundred fifty voltage to two hundred seventy voltage)complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge. (five year warranty )
Supply and fixing of Led fixture 4(four) Ftx1(one) Ft 36(thirty six) W+/- 1W Recess/Surface mounted Mounted with HET plastic diffuser with CRCA powder coated housing having efficacy of ≥120 (one hundred twenty) l (one) m/W with P.F.>0.95 (zero point nine five),THD<10% (ten percent) . The LED with useful life of 5000 hrs (five thousand hours) at L70(seventy). The LED used in the luminaire shall have CCT of 5000-5700K with CRI of minimum 80 (eighty). The input voltage range shall be 150V-270V (one hundred fifty voltage to two hundred seventy voltage). Fixture have surge protection 2KV (two kilovoltage). Driver output voltage shall be less than SELV limits for safe operation and maintenance complete with all accessories, connections, testing and commissioning etc.as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge.(five year warranty )
Supply and fixing of led downlighter in 12 (twelve) W +/- 1 W LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of ≥120 (one hundred twenty) lm/W and system lumen 1320 (one thousand three hundred twenty) lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (zero point nine five) ,THD<10% (ten percent),CCT 5700 (five thousand seven hundred)K, CRI 80 (eighty), IP20 (twenty) optical compartement.The LED with Useful life of 50000(fifty thousand) Hrs (fifty thousand) at L70 (seventy). The Input voltage range shall be 150V to 270V (one hundred fifty voltage to two hundred seventy voltage).Fixture have Surge Protection 2kV (two kilovoltage) .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Philips/Wipro/Trilux/LT as approved by Engineer-in-Charge.(five year warranty )
Supply and fixing of led downlighter in 15 (fifteen) W +/- 1 W LED Recess/surface Mounted Downlighter Round Shape with minimum system lumen efficacy of ≥120(one hundred twenty) lm/W and system lumen 1650 ( one thousand six hundred fifty)lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (zero point nine five) ,THD<10% (ten percent) ,CCT 5700 (five thousand seven hundred) K, CRI 80 (eighty) , IP20 (twenty) optical compartement.The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (seventy). The Input voltage range shall be 150V to 270V (one hundred fifty voltage to two hundred seventy voltage).Fixture have Surge Protection 2 (two) kV .Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge. (five year warranty )
Supply and fixing of LED Vertica/LD 30 (thirty) in 20 (twenty) W +/- 1(one) W LED suspended/fixed Downlighter Round Shape with minimum system lumen efficacy of ≥120 (one hundred twenty) lm/W and system lumen 1650 (one thousand six hundred fifty) lm with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 (zero point nine five),THD<10% (ten oercent),CCT 4000 (four thousand) K, CRI 80 (eighty), IP20 (twenty) optical compartement.The LED with Useful life of 50000 Hrs (fifty thousand) at L70(seventy). The Input voltage range shall be 150V to 270V(one hundred fifty voltage to two hundred seventy voltage). Fixture have Surge Protection 2kV (two kilo volt). Driver complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge. cob light. (five year warranty )
Supply and fixing of Led fixture 600mmX600mm (six hundred into six hundred millimetre) 36 (thirty six) W+/- 1(one) W Recess/Surface Mounted with HET diffuser with minimum system lumen efficacy of ≥120 (twenty) lm/W and system lumen of 4320 (four thousand three hundred twenty) lm with CRCA Housing and with P.F.>0.95 (zero point nine five) THD<10%(ten percent), CCT 5700(five thousnad seven hundred) K/4000 (four thousand)K, internal surge protection 2.5 (two point five)KV with input voltage range of 150 (one hundred fifty) V-270 (two hundred seventy) V,CRI 80 (eighty),UGR<22 (twenty two) .The LED shall be tested with LM80 (eighty) -08 (zero eight) standard with Useful life of 50000 Hrs (fifty thousand) at L70 (seventy) complete with all accessories, connections, testing and commissioning etc.as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Philips, Wipro/Trilux/LT as approved by Engineer-in-Charge.(Five year warranty)
Supply and fixing of IP65 (sixty five) Bulkhead led fixture 10 (ten) W +/- 1 (one) W Wall Mounted with minimum system lumen efficacy of ≥120 (one hundred twenty) l (one) m/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 (zero point nine five)with THD<10% (ten percent) ,CRI 80 (eighty).The LED shall be tested with LM80 (eighty) -08 (zero eight) standard with Useful life of 50000 Hrs (fifty thousand hours) at L70 (seventy). The LEDs used in the luminaire shall have CCT of ANSI Bin 5000K- 5700 K (five thousand - five thousand seven hundred) only with CRI of minimum 80 (eighty).The Input voltage range shall be 140V (one hundred fourty voltage) to 280V (two hundred eighty voltge) with 2.5 kV (two point five kilovioltage) Surge Protection. including ,hanging arrangement ,complete in all respect.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge.( Five year warranty)
Supply and fixing of IP20 (twenty) Smart PIR Occupancy Sensor having 360 (three hundred sixty) degree Detection Pattern with maximum dectection Diametre of 6 (six) metres at maximum height of 4 (four) metres haviing Power consumption of 1.8 (obe point eight) Watt with Off Delay Timing of 1-90 (one to ninety) minutes complete with all accessories, connections, testing and commissioning etc.as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make Philips/Wipro/LT/ Endo/Desano/panasonic or as approved by Engineer-in-Charge.(five year warranty)
Providing and installation of stationary storage type Electric water heater (Geyser) with temerature knob control of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Usha,jaquar,Bajaj,Recold or as approved by Er-in-charge .( Five year warranty)
10 (ten) Liter capacity water heater (Cat-A)
15 (fifteen) Liter capacity water heater (Cat-A)
25 (twenty five) Liter capacity water heater (Cat-A)
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm (five centimetre) variation made from (50 mm x 50 mm x 6 mm thick) (fifty millimetre into fifty millimetre into six millimetre) M.S. angle iron frame, covered with 1.6 mm (one point six millimetre) thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm ( fifty millimetre into six millimetre) thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. (four number) legs of 50mmx50mmx6mm (fifty millimetre into fifty millimetre into six millimetre) thick M.S. angle iron each 60 cm (sixty centimetre) long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 (one cement : two sand : four aggregate) cement concrete plat-form of suitable dimensions 15 cm (fifteen centimetre) high from ground level and 45 cm (fourty five centimetre) thick. The cubical pedestal shall be 15 cm (fifteen centimetre) from the top of cement concrete plat-form:-The panel should be approved /Tested from the CPRI lab.& should confirmed to ISI: 64139 (Indian standard Institute : sixty four thousand one hundred thirty nine) I)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
300 mm deep.(three hundred millimetre)
450 mm deep.(four hundred fifty millimetre)
1000 mm deep. (one thousand millimetre)
1200 mm deep. (one thousand two hundred millimetre)
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and including terminal spreaders in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
32,18KA (thirty two , eighteen kilo ampere)
63 amp -18KA (sixty three ampere - eighteen kilo ampere)
100 A 18 kA (one hundred ampoere eighteen kilo ampere)
160A, 25KA (obne hundred sixty ampere, twenty five kiloa mpere)
200 A, 36 KA (two hundred ampere, thirty six kilo ampere)
300 A, 50 KA (three hundred ampere, fifty kilo ampere)
Supplying and fixing , 240/415 (two hundred fourty / four hundred fifteen) volts, 10 kA (ten kiloampere), “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- L&T Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
Single pole 5-32 amp (five to thirty two ampere)
TPN 32-AMP (thirty two ampere) Beaking capacity 10 kA (ten kilo ampere)
Supplying and erection of 40/50/63 amps (fourty/ fifty/ sixty three ampher) rating, 10 KA (ten kiloampere) breaking capacity, 240 (two hundred fourty) volts, 'C' curves, miniature circuit breaker of double poles in the existing MCB DB complete with connections etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.-Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
Supplying and fixing following rating, double pole, (single phase and neutral), 240 (two hundred fouty) volts,10 KA (ten kiloampere) residual current circuit breaker (RCCB), having a sensitivity current 30 (thirty) milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
40 AMP (fourty ampere)
63 AMP (sixty three ampere)
Supplying and fixing of Segregated tripple pole and neutral surface/ recess mounting, 7 (seven) Segment 415 (four hundred fifteen) volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount MCCB incomer, DP MCB/RCCB sub-incomer ineach phase and SP MCBs as outgoing (but without MCB ’s and incomer),complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
Segregated tripple pole and neutral 6 (six) ways double door
Segregated tripple pole and neutral 8 (eight) ways double door
Segregated tripple pole and neutral 12 (twelve) ways double door
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V (two hundred forty voltage), on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar,din bar, detachable gland plate, interconnections, with appropriate rating copper lugs, gland , powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty)
MCBDB 6 (six) WAY Double Door
MCBDB 8 (eight) WAY Double Door
MCBDB 12 (twelve) WAY Double Door
MCBDB 16 (sixteen) WAY Double Door
Supplying and fixing copper strip bus-bars suitable for following size & cross sectional area 415 (four hundred fifteen) volts capacity 4 No.(four number) each in the existing enclosure with all accessories including connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble
Copper Bus Bar 63 Amp (sixty three ampere) (20.4x3.17mm) (twenty point four into three point seventeen millimetre)
Copper Bus Bar 100 Amp (one hundred ampere ) (25.4mmx3.17mm)(twenty five point four into three point seventeen millimetre)
Copper Bus Bar 200 Amp (two hundred ampere) (25.4mmx4.75mm) (twenty five point four into four point seventy five millimetre)
Copper Bus Bar 300 Amp (three hundred ampere) (31.75mmx6.35mm) (thirty one point seventy five millimetre into six point thirty five millimetre)
Copper Bus Bar 400 Amp (four hundred ampere) (38.10mmx6.35mm) (thirty eight point ten millimetre into six point thirty five millimetre)
Supplying and fixing aluminium strip bus-bars suitable for following current rating 415 (four hundred fifteen) volts capacity 4 No. (four number) each strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1 Amp ( one millimetre into one millimete = one ampere) Aluminium shall be Electric Grade E-91 (ninety one) Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.in the existing enclosure with all accessories including connections etc. as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble
Aluminium Bus Bar 300 (three hundred) Amp
Aluminium Bus Bar 400 (four hundred) Amp
Aluminium Bus Bar 800 (eight hundred) Amp
Supplying and fixing indicator set R Y & B with 3 Nos (three numbers) Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying and fixing Shock treatment chart on the existing wall etcetera as required including carriage of material within all leads and lift.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying and fixing rubber mat 1x 2 (one into two) metre long 12mm (twelve millimetre) thick infront of main panel as required including carriage of material with in all leads and lift.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying and fixing exhaust fan louver shutter for 300 mm (three hundred millimetre).exhaust fan on the existing wall,painting etc, as required,including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
supplying and fixing CT coil 600/5 amp (six hundred/ five ampere) with burden of VA 15 (fifteen) accuracy class -1 Make:- Automatic Electric Ltd/L&T/Legrand as approved by E-in- charge.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(five year warranty )
Earthing with copper earth plate 600 mm X 600 mm X 3 mm (six hundred millimetre into six hundred millimetre into three millimetre)thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 (two point seven) metre long etcetera with charcoal/ coke and salt as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
Supplying and laying lighting arrestor 1mtr (one metre) copper electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 (two) sets of brass nut bolt and spring washer )including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(five year warranty )
Supplying and laying 20 mm X 3 mm (twenty millimetre into three millimetre) copper strip as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 (two) sets of brass nut bolt & spring washer spaced at 50mm (fifty millimetre))including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Providing and fixing 4.00 mm (four point zero zero millimetre) dia copper wire on surface or in recess for loop earthing as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 (zero) to 40 (fouty) 0C, Relative humidity 0 (zero) to 95% (ninety five percent), Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity).The UPS shall include a Rectifier, inverter, battery bank suitable for 30 (thirty) minutes back up (Battery VAH capacity shall not be less than 1600 (one thousand six hundred) VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based forreliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% (ninety six percent) while operating on battery mode and delivering quality power to the 100% (one hundred percent) non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be <5% (five percent) at 50 % (fifty percent) load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 metre distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204 (six thousand two hundred four), EN6204 (six thousand two hundred fouor) Part I and Part 2,it shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% (eighty percent) of the load, Noise Level 65 (sixty five) DB at 1 (One) metre distance. The system shall be in compliance IEC 62040- 1,2 & 3 (sixty two thpusand fourty - one, two and three), IS: 16242 (Indian standard : sixteen thousand two hundred fourty two) and CPWD Specification. Display Panel(minimum) (In-build 5 (five) inch or more LC Display / LED) to display : a) Input: Voltage,current,Frequency. b) Bypass: Voltage, Frequency. c)Output: Voltage, frequency, Current. d) Battery:Voltage, Capacity. e) Load: KVA, KW, Percentage.f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 (three thousand) events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) StatisticalData: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm,UPS Overload, Fault, Shutdown, Input Over, UnderVoltage, Output Over, Under Voltage, Battery Over,Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc with Quaterly one number service five year including pcb five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- APC/Legrand-Numeric/Emerson-Vertiv/ETON as approved by E-in- charge. (five year warranty ) 60KVA (sixty kilo voltage) (Each Power module shall be < 10 KVA) (less than ten kilovoltage)
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% (seventeen point five percent), in convenient sections, joined withconnectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make Legrand/ MK as approved by Engineer in charge.
150 mm width X 50 mm depth X 1.6 mm thickness (one hundred fifty millimetre into fifty millimetre into one point six millimetre)
300 mm width X 50 mm depth X 1.6 mm thickness (three hundred millimetre into fifty millimetre into one point six millimetre)
Providing and commissioning of self supporting stool type ladder heavy duty made out of aluminium section of 115 mm (one hundred fifteen millimetre) ribbed nonislip steps with large plateform of size 482x380 mm (four hundred eighty two into three hundred eighty millimetre) ,150mm (one hundred fifty millimetre) brake type tyre castors for easy movement ,handrails 1 metre railing height from plateform for climbing comfort,guard rail 1 metre railing height from plate form complete in all respect as required. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Required size 8 (eight) feet Height.
Supplying and erection of high hot dip Galvanized octagonal pole class 'A' quality of 7 (seven) metre long having nominal dia. 130 mm (one hundred thirty millimetre) bottom A/F and nominal dia. 70 mm (seventy millimetre) top A/F made up of 3.0 mm (three point zero millimetre) thickness HR sheet a/w base plate of size 200x200x12 mm (two hundred into two hundred into twelve millimetre) thickness,The pole has a sevic window at the bottom profile comprising 4 (four) way 25 Amp (twenty five ampere) connector terminal and a MCB 10 amp (ten ampere) etcetera. The pole to be mounted on a 1:3:6 cement concrete base (pedestal) of 450X450 mm (four hundred fifty into four hundred fifty millimetre) and 300 mm (three hundred millimetre) including 4 Nos(four numbers) M 234X750 MM (two hundred thirty four into seven hundred fifty millimetre) J-Type EN 8 (eight) grade foundation bolts with nuts, templates and including G.I.bracket single 1.5 mtr (one point five metre) long as required. Foundation RCC 1:2:4 (one cement : two sand : four aggregate) shall be of size 450x450mm (four hundred fifty into four hundred fifty millimetre)and depth 900 mm c/c (nine hundred millimetre centre to centre),connection,testing and commissioning as required complete in all respects. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-Bajaj(octagonal)/SURYA/Twinkle/Kaselec/Volmount as per best satisfaction on Engineer-in -charge .
Supplying and fixing street light LED 100 (one hundred) watt with G.I bracket die cast Aluminium housing with frame and toughened glass, pipe mounting 5700k (five thousand seven hundred kilo), with Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9 (nine), Harmonic Distortion<10% (ten percent) and efficacy ≥ 120 (one hundred twenty)Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, The LED with Useful life of 50000 Hrs (fifty thousand hours) at L70 (seventy).complete with all accessories, connections, testing and commissioning etc. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-Wipro /Philips/trilux as approved by Engineer-in-Charge. (FIVE YEAR WARRANTY
Supply, Installation, Testing and Commissioning of Solar High mast system 9Mtr (nine metre) long hot dip galvanised (min.65 micron) 20 (twenty)sided polygonal structure having bottom A/F dia 410 mm (four hundred ten millimetre), top A/F dia 150 mm (one hundred fifty millimetre) of 3 mm (three millimetre) thick in single section suitable for basic wind speed 180km/hr (one hundred eighty kilometre per hours) complete with head frame luminiaries carriage suitable to install 6 nos (six numbers) lumininaries, solar panels&batteries on the top of the high mast lighting system having 6 (six) solar lights x 60 (sixty) watt each with MPPT Controller 12V DC (twelve voltage direct current ) - 6 Nos (six numbers) , Solar Module 170 (one hundred seventy) Wp BIS approved - 6 Nos (six number), LFP Battery 90 AH 12.8V BIS Approved-6Nos (with min.indivisual cell capacity 15 AH at 3.2 VX6 nos in a suitable weather resistant enclosures, material S 355 grade as per BS-EN10025 (ten thousand twenty five) and for galvanization as per BS EN ISO1461 (one thousand four hundred sixty one) min. 65 (sixty five) micron, charging time is 4-5 (four - five) hours. The 9Mtr (nine metre) Polygonal high mast with 20 (twenty) sided with all accessories, with Manual Pulley system- 1No, locking arrangement and SS wire rope of suitable size. The LED should be SMD high power LED of Nichia/ CREE/ Osram/ Phitips/ LG/Samsung /Refond/ EverlighU Seoul/ Bridgelux with min. 130 lm/w, CCT5500-6500K,CRI min.70, aluminium housing witth back box for charge controller with inbuilt LED driver power coated mettallic with mounting clamp, all harware in SS. The high mast should have a designed life of 25 years. The diametre of base plate 580mm&thickness of 20mm, lightning protection finial one mtr, foundation bolts 6 nos, dia 25mm (twenty millimetre),lenght of bolts 1000mm i/c (one thousand millimetre including) nuts with washers,RCC foundation min 1.5 mtr (one point five metre) deep(single column of 900mmx900mmx1500mm) suitable for mounting of pole on a pedestal of 1.0 mtr (One point zero metre) height above ground level, decorative pedestal 900x900x1500mm i/c (nine hundred into nine hundred into fifteen hundred millimetre) sand, filter, cement,shuttering etc. all leads and lifts as required complete in all respect with solar high mast i.e. solar PV module&flood light should be warranty for a period of five years and on battery for ten years at site replacement from the date of installation. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- Navaid/SUNROVER/EXEGI as per approved by E-in-charge. (FIVE YEAR WARRANTY)
Supplying and fixing of DLP 105x50 mm (one hundred five into fifty millimetre) PVC adaptable trunking on the exiting wall at required height from lower level for power connection, light connection and net working connection including partition chip flexible cover end cap .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Legrand ,MK as approved by Engineer-in charge.
Supplying and laying of HDPE Pipe 40 mm dia (forty millimetre diametre) for supplying and drawing of armoured cable complete in all respects as required.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :-Duke,Dolphin Poly
Supplying and fixing Surge protection device protection against indirect/direct lighting surges maxiumum dicharge current- I max upto 50 KA/ 3 pole+neutral Type 1+2 .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :L&T(AUSP 121PN50),Legrand ,Hager, ABB or its equivalent as approved by Engineer-in -charge.(FIVE YEAR WARRANTY)
Networking : Supply, Installation, Testing and Commissioning of Core Switch 24 (twenty four) port 1G/10G SFP+, 4-port 40G/100G QSFP28 Ports.Non-Blocking architecture. 1.280 Tbps Switching Capacity, & forwording rate 952Mpps, for Higher switching functionalaty. MAC Address Table Up to 32K entries or More. Min 4K static VLAN groups & Min 4K VIDs. Packet Buffer Memory 4 MB. STP/MSTP/RSTP & ERPS for less than 50 Millisecond convergence (G.8032 v1/v2) Protocol Root Guard & Loop Guard. IEEE 802.3ad Link Aggregation with LACP. 802.1p Quality of Service with 8 queues per port. Port Mirroring, Flow Mirroring, RSPAN mirroring, L2 protocol tunneling, Loopback Detection (LBD). upport IPv4 8K & IPv6 4K Routes. IPv6: PBR, Static Routing, OSPFv3, RIPv1/v2, BFD), BGPv4, IPv6 ND. IEEE 802.1ab LLDP & LLDP-MED. Hardware based forwarding for IPv4 & IPv6. DHCP-Snooping, Dynamic ARP Inspection & IP source guard. VRRP for IPV4 & IPV6. IGMPv1/v2/v3 for Layer 3 Multicast, L3 multicasting features IGMP, MLD, PIM-DM, SM. MAC & 802.1 X based Login must be available, 802.1X NAP. MAC Address based Lockdown & Limited Learning, L2/L3/L4 IP based, Source port, destination port, MAC based, Time based. AAA using RADIUS must be available, Identity-driven Policy (VLAN/ACL/QoS) Assignment. 802.3ah, 802.1ag CFM & Y.1731 OAM. Ingress & Egress ACL, Time-based ACL. Queue Handling with Strict Priority Queue, WRR, WRED, WFQ, SPQ, DRR. QoS based on 802.1p Priority Queues, MAC address, IP address, DSCP, VLAN, TCP/UDP port. SNMP V2c & V3, & RMONv1 & RMONv2. management (On https) through NMS or Full featured CLI, TELNET Access. VXLAN, 802.1AX Link Aggregation, & 4K VLAN. Netflow/IPFIX/sflow for flow exports. Operating temperature: 0°C to 45 °C & Relative Humidity: 10% to 95%. IEC-60950/CSA-60950/EN-60950/UL-60950 standard for safety requirements of information technology equipment. EMI Certificates FCC/VCCI/CE & Safety Certifications cUL/UL. IEC 62368-1:2018, EN IEC 62368-1:2020/A11, EN 55032:2015+ A1:2020, EN 55035:2017. Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent Indian Certificate). OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Juniper/D-Link/ Cisco /Arista as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Layer 2 (two) Switches: 24 (twenty four) Ports 10/100/1000 Mbps PoE + 4 Ports 10G SFP+ Smart Managed Switch, 370W from day1, Support 802.3af/at), Switching Capacity 128 Gbps, MAC Address Table 16K, Packet Forwarding Rate, 95.24 Mpps, Flash Memory 64 MB, DRAM Size 256 MB DDR3, IGMP v1/v2/v3 Snooping & MLD snooping v1/v2, 802.3x Flow Control, HOL Blocking Prevention, LLDP/ LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QOS, SPQ, WRR, WDRR, Bandwidth Control, Static routing, IPv6 Neighbor Discovery (ND), ACL Max. 768 rules shared by IPv4, MAC, & IPv6, Traffic segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC authentication, SSH v2, TLS v.1.2, DoS attack prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV surge protection on all RJ-45 access ports, Operating Temperature -5 to 50°C, Storage Temperature -20 to 70°C, Operating Humidity 0% to 95% relative humidity, Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, 2017), ISO 27001, IEC-62443-4-1:2018 or Equivalent. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-Juniper/D-Link/ Cisco /Arista as approved by Engineer-in -charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Layer 2 (two) Switches: 24x (twenty four X) 10/100/1000BASE-T Interface (inbuilt 6kV surge Protection, 4 x 10G SFP+ Uplink, switching capacity 128 Gbps, packet forwarding rates 95.24 Mpps, MAC Address Table 16K, RAM/DRAM:- 256MB & Flash/SSD : 64 (sixty four) MB, IGMP v1/v2/v3 Snooping & MLD snooping v1/v2, 802.3x Flow Control, HOL Blocking Prevention, LLDP/ LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QOS, SPQ, WRR, WDRR, Bandwidth Control, Static routing, IPv6 ND, ACL Max. 768 rules shared by IPv4, MAC, & IPv6, Traffic segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC authentication, SSH v2, TLS v.1.2, DoS attack prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV surge protection on all RJ-45 access ports, Operating Temperature -5 to 50°C, Storage Temperature -20 to 70°C, Operating Humidity 0% to 95% relative humidity, Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, 2017), ISO 27001, IEC-62443-4-1:2018 or Equivalent. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-Juniper/D-Link/ Cisco /Arista as approved by Engineer-in -charge.(FIVE YEAR WARRANTY)
Fiber Module : 10G: Supply, Installation, Testing and Commissioning of Multimode 10 (ten) G SFP Standard Compliance: IEEE-802.3ae 10GBASE-SR/LR. Distance Capacity: Up to 10 (ten) km (Single-Mode). Hot Pluggable, MSA Compliant, RoHS Compliant. Support 10 (ten) Gigs of speed. Duplex LC connector. Wavelength: 1310 (one thousand three hundred ten) nm (Single-Mode). Cable Type: Single-mode 9/125 (nine / one hundrde twenty five) um fiber (Single-Mode). DDM (Digital Diagnostics Monitoring) Supported. Operating Temperature: 0 to 70 °C, Storage Temperature: -40 to 85 °C. Operating Humidity: 0 to 85%, Storage Humidity: 0 to 95%. . OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Juniper/D-Link/ Cisco /Arista (FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Category 6 ( six) Unshielded Twisted Pair 4 (four) pair 100 (hundred) W cable shall be compliant with ANSI/TIA/EIA-568-C.2 . Cable shall extend between the work area location and its associated telecommunications closet and consist of 4 (four) pair, 23 (twenty three) AWG, UTP. ETL Verified & UL Listed. Category 6 (six) should operate on bandwidth up to 250MHz as per standard. 4 twisted pairs separated by internal X shaped, 4 (four) channel, full separator. Half shall not be accepted. Conductor 23 (twenty three) AWG Solid bare copper. Conductor Insulation material High Density Polyethylene & Sheath: FR PVC, PVC GREY- Single sheath, Insulation Thickness 0.2 mm (zero point two millimetre) Nominal. Pairs two insulated conductors Twisted Together. Each metre printed with sequential Length Counter. Pulling Force: 11.5Kg (eleven point five kilogram), Temperature Rating -20° to +70°C. Storage Temperature Rating 0° to +50°C. Filler Required, RIP cord. PACKING : Reels of 305m (three hundred five metre) Length with spool. Conductor Resistance (DC) 9.38 OHMS/100 MTR. Rsistance Unbalance 5% Max. Mutual Capacitance 5.6 nF/100 mtrs Max. Capacitance Unbalance 330PF/100M MAX. Nominal Velocity of Propagation 69%. Charcteristics Impendance 100±15%OHMS. Worst Case cable skew 45ns/100m. Generally confirming to EIA/TIA 568-C.2 and IEC/ISO 11801 (eleven thousand eight hundred one) . OEM for the cable Box and all copper Accessories from same OEM.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.
Supply, Installation, Testing and Commissioning of Patch Panel 24 (twenty four) Port 1U Size loaded with 24 (twenty four) port RJ-45 (forty five) IO. Mounts in standard 19 (ninteen)inch racks. Cable manager for improvement management. Patch panel suitable for Category 6 (six) keystone. SPCC & Black Color. Rear support bar material SPCC & Black Color. RJ-45 jack housing PBT + Glass fiber UL94V-O & Contact brackets PBT + Glass fiber UL94V-O. Rj-45 contact material phosphor bronze with nickel plated & plug contact area finish with 50 (fifty) micro-inches Gold plated. Contact resistance maximum 20 (twenty) miliohm. Operating Temperature -10° Celsius to 60° Celsius. Life of RJ-45 Jack 750 cycles minimum @ 500 (at the rate five hundred) VDC. ETL Verified / UL Listed.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Patch Cord 1 (one) Mtr. TIA/EIA 568C.2 (five hundred sixty eight C point two) standard. 24 (twenty four) AWG, multi-strands. conductor metal made from bare copper. Insulation material high density polyethylene. patch cord jacket LSZH. Conductor size: 24 -26 (twenty four to twenty six) AWG stranded bare copper, Jacket: FR-PVC, Mechanical Characteristics – Plug, Operating life: Minimum 750 (seven hundred fifty) insertion cycles, Contact blade: Copper Alloy, Contact plating: 03Mµ” Gold, Electrical Characteristics – Plug, Dielectric withstanding Voltage: 1000 (one thousand) VDC or 700 (seven hundred) VAC, Insulation resistance: >500 (five hundred) MegaOhms @ 1000 (one housand) V DC/min, Operating temperature: - 20 (twenty) Degree C to 75 (seventy five) Degree C, Clear Polycoarbonate for RJ-45 (fourty five) And Clear PVC for Boot Material, factory molded Boot, RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 (fourty seven) part 68 (sixty eight), UL Application : PC UL94-V-0, UL Listed & ETL Listed Certified, Patch cord plug gold plated. Contact blade of plug made from copper / alloy. Insertion cycle 750 (seven hundred fifty)times. Temperature range should support from 10° Celsius to 60° Celsius. Vertical flame propagation IEC 60332-1-2 (sixty thousand three hundred thirty two to one to two) , Acid Gas Emission Test – IEC 60754 - 1 & 2, Smoke Density Test – IEC 61034-2.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr. (one metre) TIA/EIA 568C.2 standard. 24 (twenty four) AWG, multi-strands. conductor metal made from bare copper. Insulation material high density polyethylene. patch cord jacket LSZH. Conductor size: 24 -26 (twenty four to twenty six) AWG stranded bare copper, Jacket: FR-PVC, Mechanical Characteristics – Plug, Operating life: Minimum 750 (seven hundred fifty)insertion cycles, Contact blade: Copper Alloy, Contact plating: 03Mµ” Gold, Electrical Characteristics – Plug, Dielectric withstanding Voltage: 1000 (one thousand) VDC or 700 (seven hundrde) VAC, Insulation resistance: >500 (five hundred) MegaOhms @ 1000 (one thousand) V DC/min, Operating temperature: - 20 (twenty) Degree C to 75 (seventy five) Degree C, Clear Polycoarbonate for RJ-45 (fourty five) And Clear PVC for Boot Material, factory molded Boot, RJ-45 (fourty five) standards: ISO/IEC 60603-7-4 and FCC 47 part 68, UL Application : PC UL94-V-0, UL Listed & ETL Listed Certified, Patch cord plug gold plated. Contact blade of plug made from copper / alloy. Insertion cycle 750 times. Temperature range should support from 10° Celsius to 60° Celsius. Vertical flame propagation IEC 60332-1-2, Acid Gas Emission Test – IEC 60754 - 1 and 2, Smoke Density Test – IEC 61034-2. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Cat6 (six) Information Outlet - Jack for User end. Category 6 (six) keystone jacks housing made from PC, UL 94V-2 material. RJ45 (fourty five) Jack contact material phosphor bronze with nickel plated. Finished with 50 (fifty) micro-inch gold plated on plug contact area. IDC Housing made from PC, UL 94V-2. Terminal material Phosphor bronze with tin plated. IDC CAP and material of IDC Cap PC, UL 94V-2. Current rating 1.5Amp ( one point five ampere) Operating Temperature -10° Celsius to 60° Celsius. Life of Jack 750 (seven hundred fifty) cycles minimum (ISO/IEC 11801 / IEC 60603-7-4). Category 6 (six) Unshielded Twisted 4 (four) pair shall be ETL Verified / UL Listed. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.D-link/Belden/Panduit/ Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Face Plate Single Keystone Jacksquare with Back Box For Single/Dual Cat 5e/Cat6/Cat6A square.including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of Cat 5e UTP Modular Plugs Pack of 100 (one hundred) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of O. F.Cable 06 (zero six) F Outdoor - Armoured Unitube SM - HDPE Sheath (OS1). Fiber type 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. Standard ISO 11801, IEC 60793-1/60794-1-2 & ITU-T-REC G.652D. Testing methods in accordance with the following standard Telecordia : GR-20 Core, ISO : 11801. Jacket Thickness 1.8 + 0.2 mm, Outer diametre should be 9 ± 0.3 mm. 3000N/100mm Crush Load (IEC 60794-1-2-E3). Bend Radius (IEC 60794-1-2-E11 & E6) should be Short Term 20D in mm & Long Term 10D in mm. Pulling Tension: Short Term 2000N, Long term 1000N pulling tension (IEC 60794-1-2-E1). Mode field diametre 9.2um ±0.5, Clad Diametre 125um ±1.0. Dispersion At 1285 - 1330nm should be <=3.5 ps/nm.km. Dispersion At 1550nm should be <=18.0 ps/nm.km. PMD value <=0.2 (ps/km). Maximum Attenuation at 1310nm should be <=0.36 dB/km. Maximum Attenuation at 1550nm should be <=0.22 dB/km. Cabled Cutoff Wavelength should be <=1260 nm. Operating Temperature should be – 20 deg C to +60 deg C. All Passive of the same make. (Copper, Fiber & Racks) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of LIU 12 (twelve) Port Rack Mount - Loaded (SC ) SM, 1U height, 19 (ninteen) inch rack mountable. Fiber optic LIU should include with LIU Box itself, Adapter Panel, Adapters & Pigtail as per requirement. Adapter panel - Cold Steel, 1.5mm (one point five millimetre) Thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 (four) Fiber spools Built-In for 900 (nine hundred) um tight buffered Fiber Storing. LIU shall be Loaded with Optical Fiber Pigtail – SC Type 1 metre Provide a field installable Single mode SC pigtails to terminate fiber optic cables from cable-to-cable, cable-to-equipment & equipment-to-equipment. Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Buffer diametre 900um Tight buffer, Minimum bend Radius: Install :30mm, Retention Strength: 20N, Cable: 900um Buffered. SM fiber pigtail, the cable type shall be HDPE/LSZH with a diametre of 3.0mm / 2.0mm. Insertion Loss (Max) <0.3 db Max, Return Loss >/= 50 db for UPC. Connector ferrule Ceramic, SC Type Simplex Type, Cable Color Yellow. Repeatability < 0.2dB 200 times Mating Cycle. Working Temp. -10 deg. C to + 70 deg. C, Storage Temp. -20 deg. C to + 70 deg. CAll Passive of the same make. (Copper, Fiber & Racks)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.(FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of LIU 24 (twenty four) Port Rack Mount - Loaded (SC ) SM, 1U height, 19 (ninteen) inch rack mountable. Fiber optic LIU should include with LIU Box itself, Adapter Panel, Adapters & Pigtail as per requirement. Adapter panel - Cold Steel, 1.5mm ( one point five millimetre) Thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 (four) Fiber spools Built-In for 900 (nine hundred) um tight buffered Fiber Storing. LIU shall be Loaded with Optical Fiber Pigtail – SC Type 1 metre Provide a field installable Single mode SC pigtails to terminate fiber optic cables from cable-to-cable, cable-to-equipment & equipment-to-equipment. Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Buffer diametre 900um Tight buffer, Minimum bend Radius: Install :30mm, Retention Strength: 20N, Cable: 900um Buffered. SM fiber pigtail, the cable type shall be HDPE/LSZH with a diametre of 3.0mm / 2.0mm. Insertion Loss (Max) <0.3 db Max, Return Loss >/= 50 db for UPC. Connector ferrule Ceramic, SC Type Simplex Type, Cable Color Yellow. Repeatability < 0.2dB 200 times Mating Cycle. Working Temp. -10 deg. C to + 70 deg. C, Storage Temp. -20 deg. C to + 70 deg. CAll Passive of the same make. (Copper, Fiber & Racks)including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge.
Supply, Installation, Testing and Commissioning of PATCH CORD LC-LC SM DUPLEX LENGTH- 1m ( one metre) , 9/125µm Single mode G652D, Duplex Type, (EIA/TIA, IEC, ANSI). Physical Contact (PC) connectors return loss > 45 dB. Ultra Physical Contact (UPC) connectors return loss > 50 dB. Angled Physical Contact (APC) connectors return loss > 60 dB. Repeatability < 0.2dB 1000 times Mating Cycle. Working Temperature –10°C ~+70°C, Storage Temperature –20°C ~+70°C. All Passive of the same make. (Copper, Fiber & Racks).including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-D-link/Belden/Panduit/Commscope as approved by Engineer-in-charge. (FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of 17 (seventeen)U Enclosure Frame 600 x 600 (six hundred into six hundred) STEEL with Welded Side Walls with accessories like fan pdu cable manager etcincluding five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-Commscope/Rittal/Norden/Panduit/D-Link as approved by Engineer-in-charge. (FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of 15 (fifteen) U Enclosure Frame 600 x 600 (six hundred into six hundred) STEEL with Welded Side Walls with accessories like fan pdu cable manager etcincluding five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-Commscope/Rittal/Norden/Panduit/D-Link as approved by Engineer-in-charge. (FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of 27 (twenty seven)U Network Enclosure Frame 600 x 800 (six hundred into eight hundred) STEEL with accessories like fan pdu cable manager etcincluding five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-Commscope/Rittal/Norden/Panduit/D-Link as approved by Engineer-in-charge. (FIVE YEAR WARRANTY)
Supply, Installation, Testing and Commissioning of HDPE 1" (one inch) with Accessories including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
MAIN LT CUM DG SYNCHRONIZATION PANEL : Design, fabrication, supply, installation, testing and commissioning of fully type tested assembly extendable panel as per IEC 61439 (sixty one thousand four hundred thirty nine) and as per OEM specification having internal arc compliance of minimum 50kA (fifty kiloampere) for 0.5 sec (zero point five second), the enclosure protection shall not be less than IP43 (fourty three), aluminium busbar with the busbars shall be of double deck arrangement for interleaved / non-interleaved design as per OEM. Note: All incoming and outgoing switchgear shall have multifunction metre with RS 485 (four hundred eighty five) communication port with LCD backlite display, indication lamps. Panel shall have LED light fixture with diffuser and fire suppression system with cylinder located besides the panel. Transient voltage and surge suppression shall be provided. The panel shall be compatible with BMS system .The panel shoud be CPRI approved. Specification, terms and conditions of the tender documents has to considered while quoting rate. Nothing extra shall be payable. i) including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble size 1200 mm (one thousand two hundred millimetre) deep (nominal)
DG # INCOMER I& II: Supplying and fixing 4 (four) pole EDO Type ACB 1250 AMP ( one thousand two hundred fifty ampere) , breaking capacity 50 (fifty) kA with inbuilt short circuit,over current and earth fault protection with adjustable setting as per specifications, & comprising of Controller for parallel genset operation (similar to InteliGen 200 (two hundred) of CompAp or equal) 3, Nos. 9three numbers) Cast resin CTs Of ratio 2000 (two thousand) / 5 Amps (five ampere) CL:1 (noe) ( For metreing),5 (five) P 20 (twenty) ( for protection ) 15 (fifteen) VA , R-Y-B indication Lamp Trip Circuit Healty and Breaker ON-OFF - Trip Indication Lamp , ,Over Voltage relay And Under Voltage relay with time delay, , 1 no ( one number) reverse power relay,Underpower Relay with Timer - 1 (one) Set, Phase Sequence Relay - 1 (one) Set, Multi Function metre having 30 (thirty) Days Memory , Trip Circuit Supervision Relay ,Master Trip Relay,Shunt trip coil 1(one) set , 240 (two hundred forty) V AC under voltage release. - 1(one) Set, Surge protection device,Breaker control switch (TNC),Auxiliary contacts required for necessary interlocking of breakers.( 6 (six) No + 6 (six) NC ),Annunciation with test and reset for fault indication,Engine cranking relay- 1(one) Set , Microprocessor based engine control automatic failure stand by relay including all accessories, Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to start’,One 16 amp (sixteen ampere) automatic Battery charger with inbuilt facility of trickle / boost & consisting of , (1) DC Ammetre (0-30) Amp (zero to thirty ampere) .(2)DC Voltmetre.(0-30) (zero to thirty ) Volt.(3)Charger ON, OFF indications ,DG start / Stop push buttons (Illuminated Type), Emergency Stop Push Button, confirm to IS/IEC 60947-2 (sixty thousand nine hundred fourty seven - two) and IEC 60947-2 (sixty thousand nine hundred forty seven - two) as required, complete in all rspect. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T , Legrand, Hager, ABB as approved by Engineer-in -charge. (five year warranty)
Solar incomer : Supplying and fixing 4 (four) pole MCCB 320 (three hundred twenty) AMP Amp Ics = 100% icu, 50 (fifty) KA & @ 415 (at the rate four hundrde fifteen) volts, 50 (fifty) Hz with Microprocessor release Mtx1.0 & ITRP3 conforms to IS/IEC 60947-2 (sixty thousand nine hundred fourty seven - two) including spreader link complete with connection ,testing and commissioning etc as required. Make:- L&T , Legrand, Hager, ABB as approved by Engineer-in -charge. including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (five year warranty)
Supplying and fixing aluminium strip bus-bars suitable for following current rating 415 (four hundred fifteen) volts capacity 4 No. (four numbers) each strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1 Amp.) Aluminium shall be Electric Grade E-91 (ninty one) Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.in the existing enclosure with all accessories including connections etc. as required including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Aluminium Bus Bar 4000 Amp (four thousand ampere)
Supplying and fixing 4 (four) pole MCCB 400 AMP (four hundred ampere) Amp Ics = 100% ( one hundred percent) icu, 36 (thirty six) KA & @ 415 volts, 50 Hz with Microprocessor release Mtx 2.0 (two) and ITRP3 conforms to IS/IEC 60947-2 (sixty thousand nine hundred forty seven to two) complete with connection ,testing and commissioning etc as required. Make:- L&T , Legrand, Hager, ABB as approved by Engineer-in -charge. (five year warranty )
Supplying and fixing 4 (four) pole MCCB 250 AMP (two hundred fifty ampere) Amp Ics = 100% (one hundred percent) icu, 36 KA & @ 415 volts, 50 Hz with Microprocessor release Mtx2.0 (two) & ITRP3 conforms to IS/IEC 60947-2 (sixty thousand nine hundred fourty seven -two) complete with connection ,testing and commissioning etc as required. Make:- L&T , Legrand, Hager, ABB or its equivalent as approved by Engineer-in -charge. (five year warranty )
Supplying and fixing PLC shall be with HMI All incoming and outgoing breakers shall be electrically/ mechanically interlocked through a Load Sharing cum Synchronization PLC comprising suitable nos. digital inputs (24 (twenty four) VDC) and output (Relay) for auto operation of DGs as per load requirement 1 (one) KVA UPS with 30 (thirty) mon back 50kA (fifty kiloampere) fault level continuous Earth Bus shall be part of Panel for full length of panel Colour coding for DG Incomer ,Transformer Incomer & Bus coupler shall be done 1 (one) set of 32 (thirty two) amp 4P MCB with wiring upto compartment of D.C.U.'s along with 1 mm 9 one millimetre) square wire for all RS-485 communication port of KWH metre to D.C.U.'s compartment. including Self-Actuated 2 (two) nos 2 Kg (two kilogram) In-Panel Tube Based Fire Suppression and shall be compatible with BMS system .etc as complete in all respect .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T,Legrand, Hager, ABB as approved by Engineer-in -charge.(five year warranty )
800 (eight hundred) KVAR CAPACITOR PANEL : Supplying and fixing Microprocessor based 16 (sixteen) Step APFC controller shall continuously monitor all three phases and displays various Electrical Parametres like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232C (two hundred thirty two) port. It shall have data logging for minimum 2 (two) months, it shall provide output for minimum 14 (fourteen)stages.etcetera as complete in all respect .including five year warranty all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge(five year warranty ) Capacitor Bank as per following: (All MCCBs ( 36 kA (thirty six kiloampere)) shall be thermal Magnetic type )
LIFTS : Supplying, Installation, Testing and Commissioning of 2 No 26 (two number twenty six) passenger with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :- KONE ,OTIS, TKE , MITSUBHSHI,SCHINDLER.
Type and Capacity : 1768 Kg (one thousand seven hundred sixty eight kilogram), 26 (twenty six) Passengers
Speed : 1.0/1.25 (one point zero / one point twenty five) metre per second
Travel :- 12 (twelve) mtr(approx.)
Controller : LVA/ACD
Serving:- 4 (four) stop with all opening on all same side.
Hoist way Dimensions:- :-(OTIS;-2350 (two thousand three hundred fifty) MM W X 3000 (three thgousand) MM D)(Shindler:-2700 mm x 3000 mm) (two thousand seven hundred millimetre into three thousand millimetre)
Head Room Required :- ( OTIS;-50 (fifty) metre)(SHINDLER:-45 (fourty five)metre)
PIT Depth:- (OTIS:-1600 MM (one thousand six hundred millimetre)) (SHINDLER:-1600 MM (one thousand six hundred millimetre)
CAR SIZE:-(OTIS:-1600 (one thousand six hundred)MM Wx 2400 (two thousand four hundred) mm D x 2400 (two thousand four hundred) mm D)(Shindler:-1600 (one thousand six thousand) MM Wx 2400 (two thousand four hundred) mm D x 2200 (two thousand two hundred)mm D)
CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish
CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening
CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb.
DOOR OPENING:-(OTIS:-1200 (one thousand two hundred) mmW X2100 (two thousand one hundred) mmH)(SHINDLER :-1200 (one thousand two hundred)mmW X2100 (two thousand one hundred)mmH)
DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing
POWER SUPPLY :- 400/415 (four hundred / four hundred fifteen) Volts, 3 (three) Phase, A.C. supply, 50 (fifty) Hzs
FAN :- 1 No (one number) with 300 mm (three hundred millimetre) sweep
FLOORING :- GRANITE
LIGHTING :- orange LED Illumination.
INDICATORS:- dot matrix LED D & P Indicators in car .
Details :-
Motor compatible for 180 (one hundred eighty) starts per hour.
Car operating panel with luminious floor button in car
Automatic Break Testing
Battery operated alarm bell and emergency light
Fireman's switch and fire rated door for 120 (one hundred twenty) minutes.
Over load warning device Voice announcement .
Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish)
Automatic Rescue Device complete with dry maintenance free batteries as required
Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car.
Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also.
Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD.
Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No (one number) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system
Visual floor indication shall be provided above the lift car door anda bove the landing doors.
Automatic phase reversal device and over voltage protection device
Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates.
The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etcetera All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying, Installation, Testing and Commissioning of 2 No 20 (two numbers twenty) passenger with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make :- KONE ,OTIS, TKE, MITSUBHSHI SCHINDLER .
Type and Capacity : 1360 Kg (one thousand three hundred sixty kilogram), 20 (twenty) Passengers
Speed : 1.0/1.25 (one point zero / one point twenty five) metre per second
Travel :- 12 mtr (twelve metre) (approx.)
Controller : LVA/ACD
Serving:- 4 (four) stop with all opening on all same side.
Hoist way Dimensions:- :-(OTIS;-2350 (two thousand three hundred fifty) MM W X 3000 (three thouand)MM D)(SHINDLER:- 2350 (two thousand three hundred fifty) MM W X 3000 (three thouand) MM D )
Head Room Required :- ( OTIS;-50 (fifty) metre)(SHINDLER:- 45 (fourty five) metre)
PIT Depth:- (OTIS:-1600 MM (one thousand six hundred millimetre)) (SHINDLER:- 16 (sixteen) metre)
CAR SIZE:- (OTIS 1300 (one thousand three hundred) MM W X 2400 (two thousand four hundred) MM D X 2400 (two thousand four hundred) MM D )(SHINDLER:- 1300 (one thousand three hundred) MM W X 2400 (two thousand four hundred) MM D X 2200 (two thousand two hundred) H )
CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish
CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening
CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb.
DOOR OPENING:-(OTIS :-1100(one thousand one hundred)mmW X2100 (two thousand one hundred) mmH)(SHINDLER:- 1100 (one thousand one hundred) MM X 2000 (two thousand) MM )
DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing
POWER SUPPLY :- 400/415 (four hundred / four hundred fifteen) Volts, 3 (three) Phase, A.C. supply, 50 (fifty) Hzs
FAN :- 1 No (one number) with 300 mm (three hundred millimetre) sweep
FLOORING :- GRANITE
LIGHTING :- orange LED Illumination.
INDICATORS:- dot matrix LED D & P Indicators in car .
Details :-
Motor compatible for 180 (one hundred eighty) starts per hour.
Car operating panel with luminious floor button in car
Automatic Break Testing
Battery operated alarm bell and emergency light
Fireman's switch and fire rated door for 120 (one hundred twenty) minutes.
Over load warning device Voice announcement .
Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish)
Automatic Rescue Device complete with dry maintenance free batteries as required
Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car.
Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .Thes System should work during ARD operation also.
Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD.
Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No (one number) each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system
Visual floor indication shall be provided above the lift car door anda bove the landing doors.
Automatic phase reversal device and over voltage protection device
Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates.
The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying, Installation, Testing and Commissioning of 1 No 15/16 (one number fifteen / sixteen) passenger with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :- KONE ,OTIS, , TKE, MITSUBHSHI SCHINDLER .
Type and Capacity : 1088 Kg (one thousand eighty eight kilogram), 15/16 (fifteen / sixteen) Passengers
Speed : 1.0/1.25 (one point zero / one point twenty five) metre per second
Travel :- 16 mtr (sixteen metre) (approx.)
Controller : LVA/ACD
Serving:- 5(five) stop with all opening on all same side.
Hoist way Dimensions:- :-(OTIS;-2350 (two thousand three hundred fifty) MM W X 3000 (three thousand)MM D)
Head Room Required :-( OTIS;-50 (fifty) metre)
PIT Depth:-(OTIS:-1600 MM (one thousand six hundred millimetre))
CAR SIZE:-(OTIS;-1600 (one thousand six hundred) mmWx2400(two thousand four hundred)mmD)
CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish
CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening
CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb.
DOOR OPENING:-OTIS:-1200 (one thousand two hundred)mmW X2100 (two thousand one hundred) mmH
DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing
POWER SUPPLY :- 400/415 (four hundred / four hundred fifteen) Volts, 3 (three) Phase, A.C. supply, 50 (fifty) Hzs
FAN :- 1 No (one number) with 300 mm (three hundred millimetre) sweep
FLOORING :- GRANITE
LIGHTING :- orange LED Illumination.
INDICATORS:- dot matrix LED D & P Indicators in car .
Details :-
Motor compatible for 180 (one hundred eighty) starts per hour.
Car operating panel with luminious floor button in car
Automatic Break Testing
Battery operated alarm bell and emergency light
Fireman's switch and fire rated door for 120 (one hundred twenty) minutes.
Over load warning device Voice announcement .
Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish)
Automatic Rescue Device complete with dry maintenance free batteries as required
Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car.
Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .These System should work during ARD operation also.
Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD.
Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system
Visual floor indication shall be provided above the lift car door and above the landing doors.
Automatic phase reversal device and over voltage protection device
Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates.
The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying, Installation, Testing and Commissioning of 1 No 8 (one number eight) passenger with machine room traction elevator of with the following specifications and features. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make :- KONE ,OTIS, TKE, MITSUBHSHI SCHINDLER .
Type and Capacity : 544 Kg (five hundred fourty fouor kilogram), 8 (eight) Passengers
Speed : 1.0/1.25 (one point zero / one point twenty five) metre per second
Travel :- 16 mtr (sixteen metre)(approx.)
Controller : LVA/ACD
Serving:- 5 (five) stop with all opening on all same side.
Hoist way Dimensions:- :-(OTIS;-1900 (one thousand nine hundred) MM W X 3000 (three thousand) MM D)(SHINDLER:- 1900 MM (one thousand nine hundred millimetre) X 1550 MM (one thousandfive hundred five millimetre))
Head Room Required :-( OTIS;-45 (fourty five) metre)(SHINDLER:- 45 (fourty five)
PIT Depth:-(OTIS:-1600 MM (one thousand six hundred millimetre)) (SHINDLER:- 1600 MM (one thousand six hundred millimetre) )
CAR SIZE:-(OTIS;-1100 mm (one thousand six hundred millimetre)Wx1300 mm (one thousand three D)(SHINDLER:- 1100 (one thousand six hundred millimetre) WMM X 1300 D X 2200 (two thousand two hundred) H MM )
CAR ENCLOSURE:- Constructed out of S.S. panels with Honey comb finish
CAR ENTRANCE:- Two speed slide side opening automatic S.S. panels in Honey comb finish with a clear opening
CAR & HOISTWAY DOOR TYPE:-Central opening power operated landing door in SS 1.5 MM (one point five millimetre) Honey comb.
DOOR OPENING:-OTIS:-800(eight hundred)mmW X2100 (two thousand one hundred) mmH)(SHINDLER:- 800 MM (eight hundred millimetre) X 200o MM (two thousand) )
DOOR OPERATION:- Automatic D.C. door operation with adjustable door opening & closing timing
POWER SUPPLY :- 400/415 (four hundred / four hundred fifteen) Volts, 3 (three) Phase, A.C. supply, 50 (fifty)Hzs
FAN :- 1 No (one number) with 300 mm (three hundred millimetre)sweep
FLOORING :- GRANITE
LIGHTING :- orange LED Illumination.
INDICATORS:- dot matrix LED D & P Indicators in car .
Details :-
Motor compatible for 180 (one hundred eighty) starts per hour.
Car operating panel with luminious floor button in car
Automatic Break Testing
Battery operated alarm bell and emergency light
Fireman's switch and fire rated door for 120 (one hundred twenty) minutes.
Over load warning device Voice announcement .
Control panel on one side in the car and hall button panel at each landing with Stainless Steel (Hair line finish)
Automatic Rescue Device complete with dry maintenance free batteries as required
Hand rail on all thethree sides at 900mm (nine hundred millimetre) above floor level to be fixed in the lift car.
Voice announcement system (English) in the car to announce the position of the elevator in the hoist way as the car passesor stops at each floors .These System should work during ARD operation also.
Braille buttons for visually challenged persons inside the car and landings. Height of car operating panel& panel at landingshall beas per Harmonised guidelines for lifts issued by MOUD.
Intercom facility Lift car :- Inbuilt intercom Reception & Lobby:1No each for lift passenger to speak with reception/ attendant with portability to connect with building inter come system
Visual floor indication shall be provided above the lift car door and above the landing doors.
Automatic phase reversal device and over voltage protection device
Feature Dtetails :- Anti nuisance car call projection, idependent service (simplex), overload device, door nudging, emergency fireman's control switch, emergency car light unit, infrared curtain door projection, door time projection, emergency alaram button, extra door time of lobby & parking, belt/rope inspetion drive, auto fan cut off, audible car call button, door open/close button, manual rescue operation, belt/rope call projection, seimic sensor, automatic rescue operation voice synthesizer, pit ladder, intercom. All signal fixtures in stainless steel faceplates.
The prices of complete job as per the specifications above shall be inclusive of steel Items, minor Building work, Scaffolding etc. All sundry fittings, assemblies, accessories, Hardware items, foundation bolts, terminal lugs for electrical connections as required, and items which are useful and necessary for proper assembly and efficient working of various components shall be deemed to have been included in this job, whether such items are specifically mentioned in the tender documents or not including free service of one year.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Annual comprehensive maintenance of 3 No 26 (three number twenty six) passenger , 2 nos 20 (two number twenty) passenger and 1 No 8 (one number eight) passenger with machine room lift, 1.0/1.25 (one point zero / one point twenty five) MPS, simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year (For Second year)
Annual comprehensive maintenance of 3 No 26 (three number twenty six) passenger , 2 nos 20 (two number twenty) passenger and 1 No 8 (one number eight) passenger with machine room lift, 1.0/1.25 (one point zero / one point twenty five) MPS, simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year For Third Year
Annual comprehensive maintenance of 3 No 26 (three number twenty six) passenger , 2 nos 20 (two number twenty) passenger and 1 No 8 (one number eight) passenger with machine room lift, 1.0/1.25 (one point zero / one point twenty five) MPS, simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year For Fourth Year
Annual comprehensive maintenance of 3 No 26 (three number twenty six) passenger , 2 nos 20 (two number twenty) passenger and 1 No 8 (one number eight) passenger with machine room lift, 1.0/1.25 (one point zero / one point twenty five) MPS, simplex automatic push button with/ without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair/ replacement of worn out items with minimum down time replaced items i/c lamps, battery of ARD lighting system and over voltage protection device etc for five year. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year For Fifth Year
FIRE ALARM : Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the two loop modules and capable of supporting not less than 240 (two hundred fourty) devices (including detectors) and minimum 120 (one hundred twenty) detectors per loop and loop length up to 2 km (two kilometre), network communication card, minimum 320 (three hundred twenty) character graphics/ LCD display with touch screen or other keypad and minimum 4000 (four thousand) events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs ( forty eight hours) back-up with 24 (twenty four) volt sealed maintenance free batteries with automatic charger.The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.two Loop Panel.including any petty material, accessory required to complete the job as required All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier of Honeywell/ Cerberus of Siemens /Edward/Bosch as approved by Engineer-in-charge.
Supply, installation, testing and commissioning of Addressable intelligent Active Loop Repeater Fire terminal with inbuilt turbo isolator, Backlit LCD Display 240 (two hundred forty) characters display, having Controls for Reset, Mute, Accept , Silence alarms and Self Test, with programmable free keys etc. The repeater panel shall be possible to connect upto 4 repeater panel with each fire detection and alarm panel and complete in all respect as required including entire carriage with all leads and lifts.The panel shall have proper listing and approval from NFPA, UL,ULC, FM, CSFM,LPCB, VDS,BRE AND AS PER RELEVANT IS CODE including any petty material, accessory required to complete the job as required All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make: Notifier of Honeywell/ Cerberus of Siemens /Edward/Bosch as approved by Engineer-in-charge.
Supplying, Installation, Testing and Commissioning of addressable multisensor smoke detector shall be with built in microprocessor and short circuit isolator capable including common mounting base plug in type and interchangeable with other smoke detector.The alarm LED shall be preferably 360 (three hundred sixty) degree.The static voltage overload protection shall be inbuilt etc. as per NFPA 72 (seventy two) style 7 (seven) wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 (seven) requirements; Drift Compensation feature and Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP rated EMC safety for detector shall be 50 (fifty ) V/m. Shall be UL/EN/VDS certification.The Detector shall be fully tested and each detector should bear the SI no and seal of the approving laboratory and complete in all respects as requied including entire carriage with all leads and lifts. The panel shall have proper listing and approval from NFPA, UL,ULC, FM, CSFM,LPCB, VDS,BRE AND AS PER RELEVANT IS CODE including any petty material, accessory required to complete the job as required All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make:- Honeywell/Bosch/ Siemens/ Edwards/ Simplex) and as approved by the Engineer-In-Charge.
Supply, installation, testing & commissioning of Intelligent Addressable Heat Detector (Static + ROR) with inbuilt turbo Isolator and integral response indicator with 360 (three hundred sixty) degree viewing angle. Detector shall communicate 3 (three) danger levels for differentiated alarm activation. It has maximum triggering temperature programmable from 58C (fifty eight) to 81C (eighty one). Detector should have unque address for communication and assigned through panel with Mounting Base as required with the protection category of IP40 (fourty)and Duly Approved by EN54/LPCB/VDS/FM All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)
Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 (forty) or better protection rating Shall be UL-FM/EN54 (fifty four)-VDS Listed Certification. All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)
Supply, Installation, Testing and Commissioning of Addressable Phone Control Module with 1 (one) input, which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL-FM/EN54-VDS Listed Certification.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)
Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 (seventy two) style 7 (seven) wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc, Shall be UL-FM/EN54-VDS Listed Certification.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make: Notifier/ Bosch/ siemens/ Edwards/Simplex)
Supply, Installation, Testing and Commissioning of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm (three hundred millimetre into two hundred fifty millimetre into one point five millimetre) rigid sheet signage containing Zink Sulphate as bare chemical class – 1 (one) material PSPA fixed on 3 mm (three millimetre) acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. including any petty material, accessory required to complete the job as required All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble (Make:- PES/Giolite/OMEX/BAJAJ/CROMPTON/PHILIPS/WIPRO/ LEGRAND
Supply, Installation, Testing and Commissioning of 3/1.5 ( three/ one point five) W Horn type loud speakers with following features:- Built-in 100 / 70 ( one hundred / seventy) V LMT compliance with IEC60268 - Part 5 (five) , Power tapping 15 / 7.5 / 3.75 ( fifteen/ seven point five/ three point seven five ) W, Sound pressure level at 3/1.5 W / 1 ( three/ one point five/ one ) W (1 (one) kHz, 1(one) m) 115 / 103 ( one hundred fifteen / one hundred three) dB (SPL)complete with necessary mounting hardware & accesories. Certified to UL/ EN standards as required complete in all respects.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make:- Honeywell/ Bosch/ Siemens/Edwards/ Simplex
Supply, Installation, Testing and comissioning of Cabinet Speaker Max Power -12 (twelve) W ,Rated power (PHC) - 9W(6-3-1.5) (six to three to one point five), Sound pressure level at rate power /1 (one) w ,(at1kHz,1m) (at 1 kHz, 1 m) - 96dB/ 90dB ( ninety six db/ ninety db) ,Effective frequency range (-10 dB) - 200-15000 Hz,Opening angle (at 1 kHz/4 kHz, - 6 dB),In degrees - 150/70 (one hundred fifty / seventy),Rated voltage - 100 (one hundred) V,Rated impedance - 166 (one hundred sixty six) .All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make:- Honeywell/ Bosch/ Siemens/Edwards/ Simplex
Supply, Installation,testing & Commissioning of digital audio amplifire 75 (seventy five) watt,25V (twenty five voltage) rms opreating 240V (two hundred foourty voltage) AC supply complete as required.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble(Make:- Honeywell/ Bosch/ Siemens/Edwards/ Simplex
Supplying & laying of 2x1.5 sqmm (two into one point five square millimetre) fire alarm armoured cable, 600/1000V (six hundred / one thousand voltage) rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake:- Polycab / KEI/ Finolex
Supply, Installation, Testing and comissioning of 2 (two) core multistrand 1.5 sq mm (one point five square millimetre) annealed copper conductor Fire alarm & speaker cable in existing pipe/ channel I/C connection etc.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalblespeaker cable Single pair, 2 (two) -core, 1.5 sqmm (one point five square millimetre) Make:- Polycab / KEI/ Finolex
Supply and erection of 25 mm (twenty five millimetre) dia PVC conduit pipe ISI marked (HEAVY) recessed in wall /ceiling etcetera including cost of PVC bends, inspection box and all other material required to complete the job in all respect All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble for fire alarm MAKE:- Diplast/BEC/NIC
Supplying and fixing of 15(fifteen) U Wall Mount Rack having Fixed Structure with 0.8mm (zero point eight millimetre) CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm (one point six millimtre) with 'U'Marking, Minimum 2 (two) cable entry/exit provision at Top and bottom with rubber protection, Front 5mm (five millimtre) Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035 (seven thousand thirty five), complied with UL & RoHS, 2 x 6 (two into six) sockets 16A (sixteen ampere) power distribution units, 3 (three) numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 (twenty into one) number, etc. complete as required.All rates are inclusive on site five year warranty of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalbleMake :- Dlink, Valrack, Netrack, Cisco
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department. Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (For Second year)
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Third Year
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Fourth Year
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for Fifth Year
FIRE FIGHTING : Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 (Indian standard one thousand two hundred thirty nine) /Class -II of IS: 3589 (Indian standard : three thousand five hundred eighty nine) including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling/slab with suitable clamp/support frame and primer,painting with two or more coats of synthetic enamel paint of required shade complete as required : including core cutting petty material, accessory required to complete the job as required. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE:-TATA/JINDAL/ SAIL/ ZENITH BIRLA
25 mm (twenty millimetre)
32 mm (thirty two millimetre)
40 mm (forty millimetre)
50 mm (fifty millimetre)
65 mm (sixty five millimetre)
80 mm (eighty millimetre)
100 mm (one hundred millimetre)
150 mm (one hundred fifty millimetre)
200 mm (two hundred millimetre)
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 (Indian standard eight hundred eighty four) complete with 30 (thirty) metre as required. (a) 20 mm (twenty millimetre) nominal internal dia water hose thermoplastic (Textile reinforced) type -2 (two) as per IS: 12585 (Indian standard : twelve thousand five hundred eighty five) (b) 20 mm (twenty millimetre) nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm (twenty five millimetre) diametre stop gun metal valve & M.S. Pipe and socket.including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/ OMEX/SAFEX
Supplying and fixing single headed internal/external Gunmetal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia (sixty three millimetre diametre) with cast iron wheel ISI marked conforming to IS 5290 (Indian standard five thousand two hundred ninety) (Type -A) with blank Gunmetal cap and chain including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Supplying and fixing 63 mm dia (sixty three millimetre diametre) , 15 m (fifteen metre) long RRL hose pipe with Gun metal 63 mm dia (sixty three millimetre diametre) male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (Indian standard six hundred thirty six) (type-A) including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Supplying & fixing 63 mm dia (sixty three millimetre diametre) gun metal short branch pipe with 20 mm (twenty millimetre) nominal internal diametre size nozzle conforming to IS 903 (Indian standard nine hundred three) suitable for instantaneous connection to interconnect hose pipe coupling as required:.including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") (thirty inch into twenty four inch into ten inch) out door type, made out of sheet having glazed door with 6mm (six millimetre) thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos (two number) .RRL Hose Pipe, 1 No (one number) Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 (Indian standard nine hundred four) including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. FourWay Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 (one point six) with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 (Indian standard seven hundred eighty)of following sizes complete in all respect, including any petty material, accessory required to complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR
80 mm Dia (eighty millimetre diametre)
100 mm Dia (one hundred millimetre diametre)
150 mm Dia (one hundred fifty millimetre diametre)
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 (Indian standard : five thousand three hundred twelve) complete with rubber gasket, GI bolts, nuts, washers etc.as complete in all respect, including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR
80 mm dia (eighty millimetre diametre)
100 mm Dia (one hundred millimetre diametre)
150 mm Dia (one hundred fifty millimetre diametre)
Supply, Installing, testing and commissioning of 100mm (one hundred millimetre) dial type pressure gauge gate valve with all accessories complete in all respect, including any petty material, accessory required to complete the job as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as complete the job as required .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.MAKE DANFOSS/INDFOS/DELTA CONTROL
supply, Installing, testing and commissioning of 25mm dia (twenty five millimetre diametre) gate valve with all accessories .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make .SANT/ZOLOTO/LEADER/ KIRLOSKAR/KARTAR
Supplying and fixing air vessel made of 250 mm dia (two hundred fifty millimetre diametre), 8 mm (eight millimetre) thick MS sheet, 1200 mm (one thousand two hundred millimetre) in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia (twenty five millimetre diametre) gun metal wheel valve with required accessories, pressure gauge and primer ,painting with synthetic enamel paint of approved shade as required. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
(a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 (Indian standard twelve thousand four hundred sixty nine : two thousand ninteen) suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c) Suitable HP Squirrel cage induction motor, 2850 (two thousand eight hundred fifty) lpm at 70 m (seventy metre) Head TEFC, synchronous speed 1500(one thousand five hundred) RPM, suitable for operation on 415 (four hundred fifteen) volts, 3 (three) phase 50 (fifty) Hz, AC supply with IP 55 (fifty five) protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018 (Indian standard - twelve thousand six hundred fifteen : two thousand eighteen).(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.(Make:Make:KIRLOSKAR/ ABB/ SIEMENS
(a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 (Indian standard twelve thousand four hundred sixty nine : two thousand ninteen) suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor 180 lpm ( one hundred eighty litre per minute) at 70 m (seventy metre) Head TEFC type suitable for automatic operation on 415 (four hundred fifteen) volts, 3 (three) phase 50Hz (fifty Hertz)AC supply with IP 55 (fifty five) class of protection for enclosure, horizontal foot mounted type with Class'F' insulation, conforming to IS-12615: 2018 (Indian standard - twelve thousand six hundred fifteen : two thousand eighteen).(d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS
(a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 (Indian Standard Twelve thousand four hundred sixty nine : two thousand ninteen )suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP, 2850 lpm ( two thousand eight hundred fifty litre per minute )lpm at 70 m ( seventy metre) Head1500 RPM (One thousand five hundred rate per minute) water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 ( Twelve / twenty four) volts electric starting equipment, )Engine accessories ; fuel sevice tank with necessary pipe work,fuel filter, pump for lubricating oil and lub oil filter,necessary safty control,a standard kit of tools ( this shall be kept on hand at all times. (3) Fuel tank suitable for min 12 hrs ( twelve hours) running and its foundation, with one empty barrel suitable for 200 ltr ( two hundred litre) with diesel 200 ltr (two hundred litre) diesel & 1(one) fuel hand pump with 5 mtr (five metre) flexible hose i/c fuel piping (supply and return) with suitable wheel valve on supply line, exhaust pipe extended upto 10 m (ten metre) outside pump house duly insulated with 50 mm (50 millimetre) thick glass wool with 1.0 mm (one millimetre) thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti vibration pads.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS
(a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019(Indian standard twelve thousand four hundred sixty nine : two thousand ninteen suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor 900 lpm (nine hundred litre per minut ) at 35 m ( thirty five metre) Head TEFC type suitable for operation on 415 (four hundred fifteen) volts, 3 (three) phase, 50 (fifty) Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class'F' insulation, conforming to IS-12615: 2018 (Indian standrad-twelve thousand six hundred fifteen : two thousand eighteen)). (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS
Providing and fixing Carbon dixoide CO2 4.5 kg (four point five kilogram) type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms (thirty centimetre) long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 (Indian standard : fifteen thousand six hundred eighty three) finished externally with red enamel paint and M S Wheel type complete with internal charge including five year site on warranty any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Minimax/Ceasefire/SAFEX/OMEX
Providing & fixing of IS marked 15683 (fifteen thousand six hundred eighty three) Water CO2 type 9 (nine) Litre (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. including five year site on warranty any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Minimax/Ceasefire/SAFEX/OMEX
Providing and fixing 4 kg ( four kilogram). ABC MAP-50 (fifty)% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases. including five year site on warranty any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-Minimax/Ceasefire/SAFEX/OMEX
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 ( one point six millimetre) mm thick stainless steel, Grade 304 (three hundred four), sheet with 3 mm (three millimetre) dia holes with stainless steel flange.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make SANT/ZOLOTO/LEADER/ KIRLOSKAR
80 mm dia (eighty millimetre diametre).
150 mm dia ( one hundred fifty millimetre).
Providing fixing,testing and commissioning of 15mm dia (fifteen millimetre diametre)chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 (sixty eight) degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make. Minimax/Ceasefire/SAFEX/OMEX/TYCO/Newage
Pendent Sprinkler
Upright sprinkler
Horizantal side wall Sprinkler
Concealed sprinkler
Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 ( fifteen) NPT on reducer thread with maximum working pressure of 175 (one hundred seventy five) PSI test pressure of 875( eight hundred seventy five) PSI (Burst) with branch line (Inlet) 25mm (two five millimetre) NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 (two) side brackets, center bracket, stockbar of 1500 mm (one thousand five hundred millimetre) complete as required. Make. Minimax/Ceasefire/SAFEX/OMEX/TYCO/Newage
Providing and Fixing UL/FM Listed Powder frinesh Esuitecheon Plate Complete inculding fixing in position on pipe and celling complete in all respect.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Provding and Fixing flow Switch in following size MS pipeincluding connection. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (MAKE: LIFEGUARD/SYSTEM SENSOR/ PLOTTER/JOHNSON CONTROL/H-GURU
100 mm dia (One Hundred millimetre diametre).
150 mm dia (one Hundred fifty millimetre diametre).
Providing, installation, Testing and Commissioning Control Valve of cast iron body,brass/bronze working part compring of water motor Alarm ,bronze seet clapper arm and hydraulically driven nechanical gong bell to sound continouous alarm when the Wet Riser /Sprinklert system activates pressure gauge emergency ,releases,strainer,pressure switch, Cock Valve complete with drain valve and bypass,let control box ball valve ,MS Pipe required size, flanges orifice plate ,gasket etc of following size as required. 150 mm dia(one Hundred fifty millimetre diametre). Make .SANT/ZOLOTO/LEADER/ KIRLOSKAR
Providing ,Fixing of 4mm thick anti Corrosive Pipe Protection Bitminous tape. Make. IWL ,All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable with lugs and gland, IS 7098 ( Indian standard seven thousand ninty eight) (PART-I) working voltage 1100 ( one thousand one hundred) volts grade on surface etc.of the required size.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make Havells. KEI. Finolex
Armoured cable 16 sq. mm ( 4.00 core) (sixteen square millimetre (four core )
Armoured cable 35 sq. mm ( 3.5 core)(thirty five square millimetre (three point five core)
Armoured cable 70 sq. mm ( 3.5 core) (seventy square millimetre (three point five core)
Supplying, installation, testing and commissioning of single section collecting head with cast iron body, nose coupling Draw-off Connection - Inlet 100mm (one hundred millimetre) & Outlet 80mm (eighty millimetre) with female outlet complete bolts, nuts and rubber insertions complete in all respect as required All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:MINIMAX/CEASEFIRE/NEWAGE/OMEX/SAFEX/
Providing and fixing following size Cast iron /steel Foot Valve Confirming to type P.N 1.6 (one point six) of I.S 13095-1991 (Indian standard thirteen thousand ninty five - one thousand nine hundred ninty one) Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 Kgs/sqcm (twenty kilograms per square centimetre). including all petty material, accessories required to complete the job in all respect All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make: SANT/ZOLOTO/ LEADER/KIRLOSKAR/LEADER/KARTAR
100 mm Dia (one hundred millimetre diametre)
200 mm Dia (two hundred millimetre diametre)
Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% (seventeen point five percent) , in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.as approved by the Engineer-In-Charge.
300 mm (three hundred millimetre) width X 50 mm (fifty millimetre) depth X 1.6 mm (one point six millimetre) thickness
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.Also free one service of diesel generator & all pumps including consumable material shall be in contractor scope of work and service shall be carried out as per OEM standards .Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year .All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. (For Second year)
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Third Year
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department.All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Add for comperehensive maintenace for Fourth Year
Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person and maintain service book and will be verify by the client department. All rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Add for comperehensive maintenace for Fifth Year
MGPS : Supply installation Testing & commissioning of Oxygen Manifold (10+10) (ten plus ten). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201 (zero two hundred one) /NFPA 99 (ninty nine)/ DIN / EN / ISO73961 (seventy three thousand nine hundred sixty one) standards. It shall be compatible with ClassD type bulk cylinders. Manifold shall consist of two high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (Indian standard three thousand two hundred twenty four)/ BS/ ASME incorporating a check valve at the header connection. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve. Oxygen Manifold should consist of 2 (two) rows of respective numbers of class Dtype bulk oxygen cylinders. The manifold should be hydraulically tested to 3000 (three thousand) psig. The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non – return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized. including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Make:-AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
Supply installation Testing & commissioning of Fully Automatic Oxygen Control Panel2100LPM @ 50 to 55 PSI The fully automatic control panel should comply with NFPA99/HTM0201/ISO 73961 standard. It shall be fully automatic, including shifting to secondary bank when the service bank is exhausted, with automatic reset of replaced bank to primary status. Semiautomatic manifolds are not acceptable. The manifold control(s) shall incorporate: a) Pressure transducer to actuate designated signals when service bank is exhausted.b) Visible display on control unit to determine when primary bank is exhausted, and the secondary bank is in operation. A continuously lit green indicator to indicate header in use. c) HMI touch Screen to indicate contents of each header. d) An amber indicator of header ready for the secondary header. A red indicator of header empty for each header. e) Display on HMI touch Screen for line pressure/Gas Flow in lpm/ FiO2.Manifold design shall ensure that the failure of any one component does not prevent continued supply of gas to patients. Manifolds design shall incorporate ed regulators for header switching and shall not require heaters for any gas. Alarm Manifold power supply shall be separate unit for ease of installation. Wiring between manifold and power supply shall be manufacturer supplied. Manifolds requiring electrical work inside the manifold cabinet during installation are not acceptable. Wiring shall terminate in power supply box not in manifold. Manifolds which can perform switching operations with electrical power are acceptable. The manifold panel should be compatible with Hospital BMS provides all relevant signals to be publish on Hospital BMS structure. Manifold Control Panel should have CDSCO license/ AMERICAN ETL/UL Listed or EU MDR/MDD certified from notified body having four digit notified number. including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
Supply installation Testing & commissioning of Emergency Oxygen Manifold (3x3) (three into three). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201 (zero two hundred one) /NFPA 99 (ninty nine)/ DIN / EN / ISO73961 (seventy three thousand nine hundred sixty one) standards. It shall be compatible with ClassD type bulk cylinders. Manifold shall consist of two high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (Indian standard three thousand two hundred twenty four)/ BS/ ASME incorporating a check valve at the header connection. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve. Oxygen Manifold should consist of 2 (two) rows of respective numbers of class Dtype bulk oxygen cylinders. The manifold should be hydraulically tested to 3000 (three thousand) psig. The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non – return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized. with piston operated regulator including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:-AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
Oxygen Gas Terminal Units : Supply installation Testing & commissioning of Oxygen, medical air and vacuum outlets . The outlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. CDSCO approval is must for both indian and imported outlets.including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Medical gas terminal units consist of two parts First fix – the wall mounted assembly consists of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow 130 (one hundred thirty) degrees radial movement of the copper stub to align with the pipeline.The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. Second fix terminal units shall be supplied with the anti-rotation pin loose and bagged to be fitted as required. The socket is fixed to the base block with a design that insure profile is always in the correct position. Probes are gas specific connectors that couple to the medical gas terminal unit sockets to provide access to gas systems. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method.All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall incorporate three injection moulded parts in fire-retardant nylon 66 (sixty six). All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper. All elastomeric seals shall be manufactured from Viton with a Shore hardness of 75 (seventy five). All user accessible parts, 2nd fix, gas ID ring, plaster box, trim plate and inks shall include Biomaster silver ion antimicrobial additive for inherent antimicrobial protection. Terminal units installed in walls, bedhead trunking, headwalls or fixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm (twelve millimetre) O/D copper stub pipe. Pressure drops across the terminal unit shall comply with clause 4.4.11 (four point four point eleven) of BS EN ISO 9170-1 (nine thousand one hundred seventy - one). The flow/pressure drop characteristics for the Gem terminal unit are shown below with the maximum allowable value. Complete data sheet of manufacturer to be provided to the engineer incharge before the product is supplied along with all certification required as per technical specs. Should have 4 (four) Digit CE markingMake:-Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon
Supply installation Testing & commissioning of OXYGEN FLOW metre WITH HUMIDIFIER BOTTLE WITH CDSCO LICENCE. 0‐15 L/min standard flow rate. It should be manufactured in an ISO 13485:2003 (thirteen thousand four hundred eighty five : two thousand three) quality management system duly certified constructed in accordance with the requirement of international standard.Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Back Pressure Compensated flow metre for accurate gas flow measurement with following features: A) Control within a range of 015 (zero fifteen) LPM. B) It should meet strict precision and durability standard.C) The flow metre body should be made of brass chrome plated materials. D) The flow tube and shroud components should be made of clear, impact resistant polycarbonate. E) Flow tube should have large and expanded 015 (zero fifteen) LPM range for improved readability at low flows. F) Inlet filter of stainless steel wire mesh to prevent entry of foreign particles G) The humidifier bottle is made of unbreakable & reusable polycarbonate /polysulfone/polypropylene material autoclavable at 121 (one hundred twenty one) degree centigrade. With a Warranty of 5 (five) Years Make:-AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
COMPRESSED AIR SYSTEM as per tender technical specifications : Supply installation Testing & commissioning of medical air Compressor shall fully comply with the requirements of the HTM 0201(zero two hundred one)/ NFPA99(ninety nine)/EN/DIN/ISO 73961 (seventy three thousand nine hundred sixty one). Compressors shall be Oil free/Oil lubricated Rotary Screw compressors. The system shall be such that the supply is maintained in single fault condition. Standby compressors system capacity shall be accordingly as per the relevant standards. A test certificate shall be provided from the manufacturer for the compressors showing the results of the tests, including the freeair flow rate obtained at normal working pressure. Compressor must be comply as per ISO 73961 (seventy three thousand nine hundred sixty one) . This declaration should be on manufacturer’s letter head which shows model no., article no.states that proposed compressor is comply to ISO 73961 (seventy three thousand nine hundred sixty one). Each compressor should be minimum 15KW/20HP motor at pressure rating of 10 (ten) bar or more. FAD of each compressor 136.4(one hundred thirty six point four)CFM (+/ 5% tolerance). Each compressor should be equipped with integrated PLC controller having advanced monitoring, High definition color display with clear service and warning indications. Easy remote monitoring through a simple Ethernet connection thanks to the builtin webserver, monitoring features include new service and warning indications, error detection and compressor shutdown Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:Atlas Copco / Becon Medeas / Chicargo Pneumatic / ELGI / Inasta Iwata
Supply installation Testing & commissioning of Air Receiver of Capacity 2000 (two thousand) Ltrs Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- B Tech / Aktive / HSIPL / Raj Med / Becon Medeas
Supply installation Testing & commissioning of duplexed air purification module shall incorporate high efficiency water separators, oil coalescing filters, heatless regenerative desiccant dryers, activated carbon filters with optional hopcalite catalyst, bacterial filters and pressure regulators. The performance of the filters shall be according to below specifications:including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Oil coalescing twoinone high efficiency filter: mass efficiency of 99,991% (ninty nine,nine hundred ninty one percent) tested according to ISO 85732 (eighty five thousand seven hundred thirty two) & ISO 125001(one lakh twenty five thousand one) Activated carbon filter: max remaining total oil content of 0,003 mg/m³, tested according to ISO 85735 (eighty five thousand seven hundred thirty five) & ISO 125002 (one lakh twenty five thousand two). Bacterial filter: particle count efficiency of 99,98% at MPPS=0.06μm,tested according to ISO 125003 (one lakh twenty five thousand three). Contaminants in the delivered air downstream of the bacterial filters shall be maintained and air quality meet with accordant to European Pharmacopeia standard / Indian Pharmocpia standard. The Dryer Controller should be touch screen and provide an intelligent human machine interface incorporating on board flash memory and realtime clock for recording operational parametres in the event log. The central control system shall operate at low voltage and include BMS connection for plant fault, plant emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5(five)” highdefinition color touch screen display with clear pictograms and LED indicators, providing easy access to system operational information. Purification module should be equipped with Integrated Gas Terminal Units Test point as per BS/DIN/NFPA99(ninety nine). The central controller shall be equipped with the remote monitoring function via the cellular network. The dryer control system shall incorporate a Purge Saver Energy Management system that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dew point level in the active tower deteriorates to an unacceptable level will the intelligent controller switch towers. The Purification module should be European MDR Certified under Class IIa category from notified body. The dryer shall incorporate a dew point hygrometre with an accuracy of ±3°C in the range 20 (twenty) to 100°C (one hundred degree celsius) atmospheric dew point and 420mA (four hundred twenty) analogue output. Aluminum oxide or palladium wire sensors are not acceptable. An alarm condition shall trigger on the dryer control panel if the dew point exceeds a 46°C (fourty six degree celsius) atmospheric set point. The plant control unit shall display the dew point of the delivered air to enable monitoring of the air quality by the hospitals estates department. Voltagefree contacts shall be included to enable the dew point alarm signal to be connected to a central medical gas alarm system and/or building management system (BMS). To enable periodic calibration of the dew point sensor element, the hygrometre shall be remotely connected downstream of the dryer via a microbore tube. It is not acceptable to install the sensor directly into the medical air supply pipeline. Make:Aktiv / Trident / Becon Medeas / Atlas Copco / ELGI / AMICO / Greggorson
Supply installation Testing & commissioning of Duplex Pressure Reducing System including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-AKTIV / Raj Med / ANK / HSIPL / Becon Medeas
Supply installation Testing & commissioning of Medical Vacuum System The duplex medical vacuum system should comply with HTM 0201/NFPA 99 (ninety nine) / DIN / EN / ISO73961 (seventy three thousand nine hundred sixty one) standards. It should be Oil Sealed Rotary Vane/Oil Lubricated Screw Type to produces minimum 85 CFM (+/ 5% tolerance) as primary and 85 CFM (+/ 5% tolerance) as standby. The vacuum plant shall comprise aircooled, oil lubricated rotary vane vacuum pumps with control panel suitable for both continuous and frequent start/stop operation at inlet vacuum levels between 500 (five hundred)mmHg and 660 (six hundred sixty) mmHg. The control system should normally employ automatic rotation of the lead pump to maximize pump life and ensure even wear. Vacuum pump inlets shall include a wire mesh filter and integral nonreturn valve to prevent oil suck back and pressure increases in the vacuum system. Each vacuum pump shall be fitted with anti vibration pads between the pump foot and mounting frame. The Total System along with accessories should be skid mounted and from the single manufacturer.Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident / Inesta Iwata / Ingersol Rand
Supply installation Testing & commissioning of vacuum receiver shall be as per MS IS 2825 (two thousand eight hundred twenty five) standards and the same should be stamped /engraved with code no./lot no along with the test certification. Air Receiver shall be supplied with Auto drain Valve, Gaues, Safety Valve.Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-B Tech / Raj Med / HSIPL / Wed Med
Supply installation Testing & commissioning of filters should be designed for removal of solid, liquid and bacterial contamination from the suction side of vacuum pump systems, preventing damage to the pump and the potential biological infection of the surrounding environment. The dryer should be particulate filter dryer with ability to remove particles as small as 1micron. Each individual filter shall have the capacity to deliver full design flow such that one set is designated duty and the other will be standby. Bacteria filters shall have efficiency at least 99.999% when tested by the sodium flame method in accordance with BS 3928:1969 (three thousand nine hundred twenty eight / one thousand nine hundred sixty nine) as per required standard utilizing particles in the 0.02 (zero point zero two) to 2 (two) micron size range. The pressure drop across each clean filter at 50% (fifty percent) of the system design flow should not exceed 25 (twenty five) mm Hg (3 kPa) at a vacuum of 475mm (four hundred seventy five millimetre) of Hg (63 kPa). Bacteria filters shall be marked with the legend ‘BioHazard’. Each bacteria filter shall be provided with a transparent sterilizable collection jar to collect condensate. Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-Aktiv / Trident / Becon Medeas / Atlas Copco / ELGI / AMICO / Greggorson
Supply installation Testing & commissioning of Ward Vacuum Unit with Regulator, Collection Jar of 700 ml (seven hundred milliliter) with Bracket.Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident
Supply installation Testing & commissioning of Vacuum High Pressure Rubber tube Yellow color.including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supply installation Testing & commissioning of Nitrous Oxide Manifold (5+5) ( five plus five). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201/NFPA 99/ DIN / EN / ISO73961 (seventy three thousand nine hundred sixty one) standards. It shall be compatible with ClassD type bulk cylinders. Manifold shall consist of two high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (three thousand two hundred twenty four) / BS/ ASME incorporating a check valve at the header connection. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve.Nitrous Manifold should consist of 2 (two) rows of respective numbers of class Dtype bulk Nitrous cylinders. The manifold should be hydraulically tested to 3000 (three thousand) psig. The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non – return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized. including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
Supply installation Testing & commissioning of Fully Automatic Nitrous Control Panel2100LPM @ 50 (fifty) to 55 (fifty five) PSI The fully automatic control panel should comply with NFPA99/HTM0201/ISO 73961(seventy three thousand nine hundred sixty one) standard. It shall be fully automatic, including shifting to secondary bank when the service bank is exhausted, with automatic reset of replaced bank to primary status. Semiautomatic manifolds are not acceptable. including Designing ,petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. a) Pressure transducer to actuate designated signals when service bank is exhausted. b) Visible display on control unit to determine when primary bank is exhausted, and the secondary bank is in operation. A continuously lit green indicator to indicate header in use. c) HMI touch Screen to indicate contents of each header. d) An amber indicator of header ready for the secondary header. A red indicator of header empty for each header. e) Display on HMI touch Screen for line pressure/Gas Flow in lpm/ FiO2. Manifold design shall ensure that the failure of any one component does not prevent continued supply of gas to patients. Manifolds design shall incorporate ed regulators for header switching and shall not require heaters for any gas. Alarm Manifold power supply shall be separate unit for ease of installation. Wiring between manifold and power supply shall be manufacturer supplied. Manifolds requiring electrical work inside the manifold cabinet during installation are not acceptable. Wiring shall terminate in power supply box not in manifold. Manifolds which can perform switching operations with electrical power are acceptable. The manifold panel should be compatible with Hospital BMS provides all relevant signals to be publish on Hospital BMS structure. Manifold Control Panel should have CDSCO license/ AMERICAN ETL/UL Listed or EU MDR/MDD certified from notified body having four digit notified number. With a Warranty of Years make:_ AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon .The manifold control(s) shall incorporate:
Supply installation Testing & commissioning of Emergency Nitrous Oxide Manifold (1x1) (one into one). The cylinders shall not be included in the quoted price. The manifold(s) should comply with HTM 0201(two hundred one)/NFPA 99(ninety nine)/ DIN / EN / ISO73961 (seventy three thousand nine hundred sixty one) standards. It shall be compatible with ClassD type bulk cylinders. Manifold shall consist of two high pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224 (three thousand two hundred twenty four) / BS/ ASME incorporating a check valve at the header connection. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high pressure shut off valve. Nitrous Manifold should consist of 2 (two) rows of respective numbers of class Dtype bulk oxygen cylinders. The manifold should be hydraulically tested to 3000 (three thousand) psig. The manifold should be so designed that it shall suit easy cylinder changing and positioning. The system should have non – return valves for easy changing of cylinders without closing the bank. The cylinder should be placed with the help of cylinder brackets and fixing chains which should be galvanized. with piston operated regulator including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:_AKTIV /Raj Med / HSIPL / Becon Medeas / Greggorson / Amico / Penlon
Supply installation Testing & commissioning of Nitrous Oxide outlets and probes should be as specific and non- interchangeable. The gas outlets have heavy duty constituents and smooth connection and disconnection. The outlets must be labeled and color coded. CDSCO approval is must for both indian and imported outlets. Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:- Becon Medeas / Atlas Copco / Greggorson / Amico / Penlon
Medical gas terminal units consist of two parts
First fix – the wall mounted assembly consists of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow 130 (one hundred thirty)degrees radial movement of the copper stub to align with the pipeline. The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. Second fix terminal units shall be supplied with the anti-rotation pin loose and bagged to be fitted as required. The socket is fixed to the base block with a design that insure profile is always in the correct position. Probes are gas specific connectors that couple to the medical gas terminal unit sockets to provide access to gas systems. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method.
All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall incorporate three injection moulded parts in fire-retardant nylon 66. All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper. All elastomeric seals shall be manufactured from Viton with a Shore hardness of 75(seventy five).
All user accessible parts, 2nd fix, gas ID ring, plaster box, trim plate and inks shall include Biomaster silver ion antimicrobial additive for inherent antimicrobial protection.
Terminal units installed in walls, bedhead trunking, headwalls or f ixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm(twelve millimetre )O/D copper stub pipe.
Pressure drops across the terminal unit shall comply with clause 4.4.11(four point four point eleven) of BS EN ISO 9170-1. The flow/pressure drop characteristics for the Gem terminal unit are shown below with the maximum allowable value.
Complete data sheet of manufacturer to be provided to the engineer incharge before the product is supplied along with all certification required as per technical specs.
Should have 4 (four)Digit CE marking
Distribution Copper Pipe : Llyod Company with Testing Certificate
Supply installation Testing & commissioning of Copper pipe should be as per standard BS: EN 13348:2008,(thirteen thousand three hundred forty eight : two thousand eight )Solid drawn, seamless, deoxidized, nonarsenical, half hard (hard can be accepted only for sizes 54mm (fifty four millimetre ) or more), tempered and degreased copper pipe conforming to the standard. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufacturers test certificate for the physical properties & chemical composition. Copper pipe must have reputed third party inspection certificate (Eg. Lloyd’s or TUV or SGS). Fittings should be made of copper and suitable for a working Pressure of up to 17(seventeen)bar and especially made for brazed socket type connections. The isolation valve body shall be made of chromium plated brass with nonlubricated balltype. All valves shall be pneumatically tested for twice the working pressure and factory degreased for medical gas service. Copper fittings should
comply with EN 1254:1 (one thousand two hundred fifty four : one) factory degreased and brazing filler metals should comply with EN 1044(one thousand forty four). Fitting should be degreased, accordingly packed for medical use.
Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves that have been degreased and fittings shall be used at site. Pipe fixing clamps shall be of nonferrous or nondeteriorating plastic suitable for the diametre of the pipe. Inert gas welding technique should be used by passing oxygen Free Nitrogen Gas inside the copper pipes during silver brazing, in order to avoid carbon deposition inside the copper pipes. Only coppertocopper joints are permitted on site except threaded or flanged joints may be made where pipelines are connected to items such as valves and control equipment. No flux shall be used for joining Copper to Copper joints and on for joints made on site. The insides shall be clean and free from oxides and particulate matter and the minimum penetration of the brazing alloy at any point shall be three times the wall thickness of the tube. If the joints examined do not conform to these requirements, then adjacent joints shall be cut out and examined until the extent of faulty workmanship has been made good. Coppertobrass or gunmetal joints shall only be made under controlled conditions off site. The joints are ordinarily used to join short copper pipe tails to brass, gunmetal or bronze fittings to permit their connection into the pipeline. The subassemblies shall be degreased and individually sealed in bags or boxes before delivery to site.
Adequate supports should be provided while laying pipelines to ensure that the pipes do not sag. Suitable sleeves shall be provided wherever pipes cross through walls / slabs. All pipe clamps shall be nonreactive to copper.
After erection, the pipes are to be flushed with dry nitrogen gas and then pressure tested with dry nitrogen at a pressure equal to twice the working pressure or 150 (one hundred fifty ) psig, whichever is higher for a period of not less than 24 (twenty four) hours.
Length and quantity of individual items (Copper pipes, AVSUs, Alarm panels, Isolation valves, Outlets, pendants etc.) are mentioned. However quantity will be calculated and paid at actual. Bidder should quote unit price for all the items as detailed
Maximum interval between supports (Horizontal and Vertical)
(12mm (twelve millimetre) Pipe 1.5mm (one point five millimeter), 15mm (fifteen millimetre ) pipe 1.5m (one point five millimetre, 22mm(twenty two millimetre) pipe – 2m(two metre), 28mm(twenty eight millimetre) pipe2m(two metre), 35mm(thirty five millimetre) pipe2.5m(two point five metre), 42mm(fourty two millimetre) pipe 2.5m(two point five metre), 54mm(fifty four millimetre) pipe 2.5m(two point five metre), 76mm(seventy six millimetre) pipe – 3(three)metre) Painting
All the pipes from manifold/plant up to the outlets should be painted with two coats of synthetic enamel paint and colour codification should be as per standards followed and with consultation with competent authorities of the Institute.including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make:-Mandev / Rajco / Maxflow / Nefton
42 mm OD x 1.2 mm (forty two millimetre OD X one point two millimetre)thick
35mm OD x 1mm (thirty five millimetre OD X one millimetre) Thick
28 mm OD x 0.9 m (twenty eight millimetre OD X zero point nine metre) thick
22 mm OD x 0.9 mm(twenty two millimetre X zero point nine millimetre) thick
15 mm OD x 0.9 mm(fifteen millimetre OD X zero point nine)thick
Supply installation Testing & commissioning of master alarm should comply with NFPA99(ninety nine) n/HTM0201(two hundred one)/ISO 73961( seventy three thousand nine hundred sixty one) standard. It should have CDSCO license/EUROPEAN CE certified from notified body having 4(four) digits notified number/American ETL or UL or ATL Listed. Master Alarm System panel shall be microprocessor based with individual microprocessors on each area display and sensor board. The sensors shall be capable of local or remote mounting. Each area display module/sensor unit shall be gas specific & with an error message display for an incorrect connection. Alarm should be capable with hospital BMS facility. Master Alarm panel allow users to set up customized instructions for each alarm signal, to appear on the screen when the signal is in alarm. Alarm should be with the touch screen interface on the alarm panel screen. Edit or Incorporate userdefined instructions into an emergency response plan by the hospital facility. Alarm should be capable of monitors up to 32 (thirty two) local inputs. The alarms shall be field expandable with the facility for addition of extra modules up to six services to be accommodated per standard box. A builtin web server in each panel allows a remote operator to display the alarm's web page and view alarm signals, pressures, and other networked devices.
Each specific service shall be provided with numerical digital read comprising of 0250(zero two hundred fifty) psi for positive pressure and 030 (zero thirty) inch Hg for vacuum. The touch screen panel readout shall provide a constant indication of each service being measured. Minimum screen size should be 10(ten)inches Touch Screen HMI Display. Each service indicating a green “NORMAL”, yellow “CAUTION” and a red “HIGH” or “LOW” alarm condition. If an alarm occurs, the “RED” alarm light will flash and an audible alarm will sound. Pushing the “ALARM SILENCE” button will cancel the audible alarm but the unit will remain in the alarm condition until the problem is rectified.
The default set points shall be +/ 20(twenty)% variation from normal condition.
In the calibration mode the following parametres shall be field adjustable:
High/Low set points
Imperial /Metric Units
Repeat alarm enable/disable
Set points shall be adjustable by two on board push buttons.
In addition, “PUSH TO TEST” & “ALARM SILENCE” buttons shall be easily accessible to operate and test the unit.
Combination master/area alarms shall have no moving parts and shall require no maintenance after initial installation.
• Medical Gas Pipeline plant room/manifold alarm system shall indicate the following
Manifold Main Bank Discharging O2(zero two)/N2O(twenty)/CO2(zero two)/N2
MGPS header pressure Normal / Lo / Hi with digital read out
Medical Air System Primary Supply ON/OFF with digital read out.
Medical Air Secondary System ON/OFF with digital read out.
Medical Vacuum Primary System ON/OFF with digital read out
Medical Vacuum pump secondary system ON/OFF with digital read out. including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make;-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident / Raj Med / ANK
Area Service Valve Unit with HMI based touch screen Alarm (AVSU) with CDSCO licence: Supply installation Testing & commissioning of Area Valve Service Unit (AVSU) should incorporate a ball value with NIST connectors either side, mounted in a lockable box with emergency access. The valve should be complete with copper stub pipes that extend to the outside of the box to enable easy connections to the Medical Gas Pipeline System (MGPS). The value should operate from fully closed to fully open with a quarter turn of the handle. Should be full bore values for minimum pressure loss. Comprise of fullbore ball valve complete with copper stub pipes for ease of installation. The valves shall be connected to the copper stub pipes by means of union nut and nipple, allowing removal of the valve without the need to distort the pipe work.,. The valve will have a brass body, with a full –bore chrome plated brass ball. The valve shall operate from fully closed to fully open with a quarter turn of the handle. The stub pipes should have the appropriate coded NIST connector’s fitted one side of the valve. The valve box should have a universal back plate for first fix mounting and a metal body, cover which fits over the installed valve. A colorcoded service identity label will be fitted. The door should incorporate a quick release mechanism for emergency access to the valve. Should be reliable and easy to operate and must have NIST connectors facilitate easy purge, sample and pressure testing, and emergency, supply system. Should be easy site installation with prefitted stub pipes. All break access glass should be approved safety glass and not float glass. They should have break glass emergency access fitted as standard. Should have optional quick release emergency access system. The Area Valve Service Unit (AVSU) should incorporate a ball valve with NIST connector’s one side, mounted in a lockable box with emergency access. including
5 (five) Gas
3 (three) gases (2 (two) Gas+1(one) Vacuum)
Supply installation Testing & commissioning of Isolation Valve line valves: (DEGREASED FOR MEDICAL USE) ession. Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make;-AKTIV / Atlas Copco / Becon Medeas / HSIPL / Trident / Raj Med / ANK
It should fully comply and meets with the HTM0201(zero two hundred one) /NFPA99(ninety nine)/ISO 73961(seventy three thousand nine hundred sixty one ).
Lockable line valves and should comprise fullbore ball valve complete with copper stub pipes for ease of installation. Valve connected to the copper stub pipes by means of flat faced unions fitted with nitrile Oring seals, allowing removal of the valve without the need to distort the pipe work. Stub pipes for valve up to 54 mm will be connected to the valve body using screwed connectors, while valve above this size will use flanged connectors.
Valve Brass body, end cap and stem, with a full – bore chrome plated brass ball. Valve Operate from fully closed to fully open with a quarter turn of the handle.
All line values Supplied with a mechanism to enable the unit to be locked in the fully closed or fully open position. Supplied with copper stub pipes for ease of installation using inert gas jointing procedures. ORing Seals on the valve stub allow gas tight capping at a spur for further expr
15 MM (fifteen millimetre).
22 MM (twenty two millimetre).
28mm(twenty eight millimetre)
35mm (thirty five millimetre)
42mm (fourty two millimetre)
Supply installation Testing & commissioning of Electrical panel With 3 (three) Phase Sequancer ( rectifier ) for a vacuum system and air compressor provides a centralized location for controlling and protecting these systems. It typically includes components like motor starters, circuit breakers, and control devices to manage power distribution, starting/stopping operations, and monitoring the status of the equipment according to Control System Engineers. including Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make;- Hindustan Electrical, Right tech , Inovation tech, NG Solution, HSIPL / Air sol
Supply installation Testing & commissioning of Single arm pendants with 330(three hundred thirty) rotation should be quoted. It should have 5(five) gas outlets, 4(four) electricity outlets, I shelf for 15(fifteen)” monitor and a weight bearing capacity of 15 (fifteen) Kgs or more. The pendant should be sturdy and stable at all points of movement. Designing ,petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make;- Beacon Medeas, Greggersen, Penlon,dragger, Aktiv Shalya, ANK, HSIPL
330° Utility console rotation-Utilitas C. 330° Utility console rotation+ 330° Arm rotation Utilitas C1. High Payload. True Versatility. Flexible Solution. Effortless maneuverability. Optimum functionality. Easy access to console facia. Bedside safety. User-friendly positioning of Medical Devices. -All services integrated into the pendant system ensuring optimal safety. -Convenient positioning of gas, equipment, electrical and specialty services. -Service head ergonomics – Shelves / Monitor mounting solutions. -Hose connection - Gas specific NIST connectors. -Power supply - Low smoke halogen cable through spiral conduit terminating at junction box. -Hygiene- Minimum visible screws, combined with smooth surfaces for easier cleaning and disinfection . -Configuration can be customized within the limits of applicable standards . --220V AC Electrical socket -Four shutter type multi-standard sockets compatible to 5-6-10-13A plugs and three 16A sockets will be provided. -Earthing - Protective Earth . -Body (Pendant) Alloy 6063 T6 : Extruded aluminium profile (T = not less than 2.5mm). Suspension Assembly Pre-engineered Rust-proof (passivate) Trivalent Zinc plated (8-10µm) steel. -Finish (Pendant) Epoxy coating to RAL 7035 (Textured). -SEEB (Optional) Plug and socket for Supplementary Equipotential Earth Bonding. -Mounting Complete mounting system with NIST connection for gas & vac services and terminals for power connection. - Communication Ports 1 - RJ45 Data socket, 1 - RJ11 Telephonic socket
Comprehensive maintenance of whole Manifold gas pipe line system for five year on site replacement warranty and servive of whole system. Note all materials should be replacement/repairing of defective spare parts own his cost . The Contractor/ authorised person shall be two visit monthy mandatory and if any breakdown occure the contractor should be attend the ccomplaint with 24 hours /minimum downtime. Note:- All the rates quoted by the contractor shall be complete finished work including Five year warranty and cost of designing, all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties etc. All works shall be executed as per drawings,, specification and instructions of Site incharge and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/or the drawings. The Equipments/Material shall be duly approved by Engineer in charge/Client Department before incorporation in the actual work. For general specifications Max-± 5% deviation in parametres will be allowable provided that it may not effect the performance of the system.
SOLAR POWER GENERATION : Supply, Installation,Testing and Commissioning of on grid Solar Photovoltaic Power Plant 90(ninety) KWP conforming to MNRE specifications as amended, consisting of Mono / Poly Crystalline silicon solar cells, net metreing facility, necessary protections, earthing, mounted on Aluminium / GI structure of suitable strength with following components complete as required:-a) Solar Photovoltaic Module of capacity 90kWP or above, manufactured in India, conforming to IS 14286(fourteen thousand two hundred eighty six) / IEC 61215(sixty one thousand two hundred fifteen), IS / IEC 61730(sixty one thousand seven hundred thirty)-Part-1(one), IS / IEC 61730(sixty one thousand seven hundred thirty)-Part 2(two). Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants /systems must be warranteed for their output peak watt capacity, which should notbe less than 90% at the end of 10(ten) years and 80(eighty)% at the end of 25(twenty five) years.b) Power Conditioning Unit (PCU) of 350-800V(three hundred fifty - eight hundred voltage) DC Input voltage range and 400V(four hundred voltage) AC, three phase, 4 wire, 50 Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3(three)% and suitable for ambient temperature from 0(zero) to 50(fifty)degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction box with IP 65(sixty five) protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1(one point one) kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Makes:- SPV modules:- Tata power/ Kirloskar Solar/ Adani , PCUs (Inverter):- Delta/ABB/ Fronius/(MNRE approved), AC/ DC Distribution units:- Siemens/ABB/ Schneider Electric/Legarand and other items as per OEM and should be BIS.
HVAC : Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating having 100% ( one hundred percent) hermetically sealed inverter type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated capacity upto 39°C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40 and <70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building) For Cooling and Heating to complete the job including desining and five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax, sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Outdoor Unit PER HP Make :- Daikin/ O General/ Mitsubishi/ Hitachi
FLOOR MOUNTED AIR HANDLING UNIT : DX AHU COMPATIBLE WITH VRV/VRF DX ODU OT Supply, Installation, testing and commissioning of factory fabricated double skin type Air Handling Units 2(two) tier construction with recovery wheel (BMS compatible) for Operation Theatres as per specifications given below:-AHU Construction:- It shall be made out of 0.8 mm(zero point eight millimetre) pre - coated Galvanised steel sheet outside & 0.8 mm(zero point eight millimetre) plain steel sheet inside with 40 mm(forty millimetre) thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 40 kg(forty killogram)/Cum between them. Drainpan (made out of 1.2 mm(one oint two millimetre) stainless steel (SS Grade 304(three hundred four)) sheet insulated with 19 mm(nineteen millimetre) think closed cell insulation nitrile rubber with thermal brake profile.Necessary foundation required & anti vibration pads shall be provided& cost for the same shallbe included in this item. Supply Air Stream:-1) Filter section consisting of pre filter, fine filter & HEPA filters(preferably at Terminals) in aluminum casing .Pre-filter section shall be with non woven synthetic media of 10(ten) micron particle size with an efficiency of 90% ( ninety percent) , fine/microvee filter section will be with media of 3 (three)micron particle size of efficiency 99%(ninety nine percent). HEPA filter section with media of 0.3(zero point three) micron particle size with an efficiency of 99.997% (ninety nine point nine , nine seven)at terminals. The quoted price shall also include VCD, pressure differential indicator across Fine filters and HEPA filters with audible and visual alarms.2(two)
FM-AHU- 20(twenty) TR / 6000 (six thousand) CFM | ESP 125mm (one hundred twenty five millimetre) +ISP as per OEM mm of W.C & 4500 (four thousand five hundred) CFMreturn/Exhast fan with 40mm(forty millimetre) Static pressure DX COIL 1(one) Working + 1(one) SBY The Exhaust and Inlet should have a Heat Recovery Wheel for energy saving.Operation Theatre-1 (one)& 2(two)
FM-AHU- 30 (thirty)TR / 8000(eight thousand) CFM | ESP 65mm(sixty five millimetre) +ISP as per OEM mm of W.C
FM-AHU- 20(twenty) TR / 6000(six thousand) CFM | ESP 65mm (sixty five millimetre +ISP as per OEM mm of W.C
FM-AHU- 10 (ten)TR / 3500 (three thousand five hundred) CFM | ESP 65mm (sixty five millimetre) +ISP as per OEM mm of W.C
Suppy and installation of laminar flow (LAF) system direct flow from ceiling to floor. The flow passing over head and upper body of surgeon and assistant made out of aluminium powder coated made of 16SWG particle size retention of 0.3 mm (zero point three millimetre), plenum size 3'x6' (three feet into six feet) complete with Hepa filters of size 610 x610 x 305 mm(six hundred ten into six hundred ten into three hundred five) and SS perforated grilles having minimum 50% (fifty percent) perforation entry of air to housing shall be from side center of plenum shall be blanked off for lightening provisions. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make:- Kynor, GS Enterprises,Thermadyni, Avonaire,Uniaire.
Supply, installing, testing and commissioning, of of IP55 ( fifty five) Variable frequency drive(VFD) for AHU . The other specifications are (Ambient temp 50 ( fifty) Deg without deration), 100 ( one hundred) kA SC rating with built in BACnet, Metasys, Apogee protocols , 2 (two) PIDs, C2 Class EMI Filter for 1st Environment, 5% ( five percent) Impedance DC Choke on both(+ve & -ve) limbs and should be able to reduce THDi<32% ( thirty two percent) @ 100% 9 one hundred percent) load & THDi<35% ( thirty five percent) @ 75% ( seventy five percent) load with input PF>0.96 ( zero point ninety six) @50% ( fifty percent) load as per IEC 61800-2(Valid third party test report should be available to suffice this claim, own test report by manufacturer shall not be considered). VFD shall have inbuilt 5 ( five) line Graphical & Alpha Numeric LCD Key Pad ( Power in kW, Energy in kWh, Run time in hours & feedback signals in HVAC units viz WC, PSI, GPM, °F, ft3/min, m3/h, L/h, L/s, bar, Pa, °C, M, ft., L/min, m3/min, “Hg, kPa, %) along with Hand Off Auto Keys & Real time clock with battery etc as per specification complete as required to operate.3.5KW to7.5KW to complete the job including five year on site warranty. The rates are inclusive ofcarriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. .make:-Allen Bradley / Danfoss / ABB / Honeywell / Siemens / L&T
Supply, installation, testing and commissioning of 5(five)kwh wall / floor mounted Humidifier shall be Horizontal Floor standing with casters. The tank shall be constructed out of 1.2 mm(one point two millimetre) thick SS-304 Sheet. Control Panel made out of 1.2mm(one point two millimetre) thick CRCA sheet duly powder coated.The Pan Type Humidifier shall have Water filter membrane and Air filter assembly, Level switches for upper and lower water level, Piezo transducers with Low water level protection., Solenoid operated Water makeup/Fill, Drain Valve ) Water Overflow connection with valve, Mist outlet point, Power Supply Suitable for 1(one)Phase, 230(two hundred thirty)VAC +5(five)% regulated power supply upto 30LPH and above 30(thirty)LPH suitable for 3(three)Phase, 415(four hundred fifteen)VAC +5(five)% Electrical Control Panel for Ultrasonic to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
Temperature and RH sensor and adjuster package: Supply, installation, testing and commissioning of latest generation digital display type BMS compatible thermostat / humidistat with controller for cool / heat application suitable for two/four pipe system & humidistat suitable for working with humidifier and dx coil control valves for various air handling Units. The thermostat shall have provision of setting of space temperature and display of the same. The humidistat shall have provision of setting space RH and display of the same. The quoted price of thermostat / humidistat shall include the cost of 20mm ( twenty millimetre) MS conduits, control cabling, MS Box etc. as required. The cost quoted shall be excluding the control valves and humidifier. It shall include all accessories ,mountings, wiring between thermostat & unit, terminations etc. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Makes-Honeywell,Siemens, Schneider
Thermostat: Supply, installation, testing and commissioning of automatic control for Units for pipe system (heating / cooling) consisting of modulating thermostat, which will have provision of setting of room temperature, setting offan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc. as required. It shall include all accessories, mountings, wiring be tween thermost at & unit, terminations etc. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi , royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Makes-Honeywell,Siemens, Scneider
Supply, Installation, Testing and Commissioning of Central Controller of digital type of latest generation suitable for all VRV/VRF equipments/AHU to operate, Monitor, Scheduling Programme, On/Off, Temperature Setting etc as per specification complete as required to operate all the indoor units. With BMS Compatible.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :- Daikin/O General/ Mitsubishi/ Hitachi.
SITC for ODU Isolator for suitable capacity.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
Supplying, Installation, Testing and Commissioning of following minimum capacity High wall type Indoor unit equipped with and comfort washable synthetic media prefilter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230(two hundred thirty) V ± 10(ten)%, 50(fifty) Hz, single phase AC supply, complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27(twenty seven)0C DB and 19 (nineteen)0C WB temperature. (Make will be same as of Outdoor)to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax, sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Hiwall Type Indoor Unit - 1.0 TR Min
Hiwall Type Indoor Unit - 2.0(two point zero) TR min
Supplying, Installation, Testing and Commissioning of following minimum capacity 4(four) way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230(two hundred thirty) V ± 10(ten)%, 50(fifty)Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Cassette Type Indoor Unit - 1.0 ( one point zero) TR
Cassette Type Indoor Unit - 1.2 (one point two) TR
Cassette Type Indoor Unit - 1.6 (one point six)TR
Cassette Type Indoor Unit - 2.0 (two point zero)TR
Cassette Type Indoor Unit - 2.6 (two point six)TR
Cassette Type Indoor Unit - 3.6 (three point six)TR
Cassette Type Indoor Unit - 4.1 (four point one)TR
Cassette Type Indoor Unit - 4.6(four point six) TR
Supplying, Installation, Testing and Commissioning of following minimum capacity and external static pressure VRF/VRV ceilingmounted mid high static ductable type Indoor unit equipped with washable synthetic media prefilter, fan sectionwith low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration Isolators, drain pan, drain pump, other necessary supports etc., suitable for operation on single phase AC supply 230 (two hundred thirty voltage) V ± 10(ten)%, 50(fifty) Hz complete as required. The Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27(twenty seven) 0C DB and 19 (nineteen) 0C WB temperature. (Make will be same as of Outdoor) High Static Ductable units (minimum 49(forty nine) to 77 (seventy seven)pascal external static pressure) to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax, sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Ductable Type Indoor Unit - 1.0 ( one point zero) TR
Ductable Type Indoor Unit - 1.6 (one pont six)TR
Ductable Type Indoor Unit - 3.2(three point two) TR
Ductable Type Indoor Unit - 4.1 (four point one)TR
Ductable Type Indoor Unit - 4.6(four point six) TR
Ductable Type Indoor Unit - 8.3(eight point three) TR
Supply installation testing and commissioning of AHU Kit for AHU which shall be supplied with necessary expansion kit and control box with wired remote to connect with VRV outdoor units to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Supply installation testing and commissioning of Refnets/Headers of required size as suggested by OEM to connect indoor units. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Supply installation testing and commissioning of ODU Connecting kit of required size as suggested by OEM .to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make :- Daikin/O General/ Mitsubishi/ Hitachi.
Drain Piping: SITC of PVC (Minimum 15 Kg/Sqcm (fifteen killogram/square centimetre) pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diametres of Pipes in mm as indicated below:to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Supreme/Prince/Finolex
25 mm(twenty five millimetre) ( with 9 mm (nine millimetre)Class- O XLPE)
32 mm(thirty two millimetre) ( with 9 mm(nine millimetre)Class- O XLPE)
40 mm(forty millimetre) ( with 9 mm(nine millimetre) Class- O XLPE)
50 mm(fifty millimetre) ( with 9 mm (nine millimetre)Class- O XLPE)
Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cellelastometric nitrile rubber tubular sleeves sections of 19 mm (nineteen millimetre)thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble . Make: Maxflow/Rajco/Mandev/Jobu/Hariom
41.27(forty one point twenty seven) dia (OD) (Hard drawn) with tube thickness 1.62 mm(one point sixty two millimetre)
34.9(thirty four point nine) dia (OD) (Hard drawn) with tube thickness 1.62 mm (one point sixty two millimetre)
31.8(thirty one point eight) dia (OD) (Hard drawn) with tube thickness 1.62 mm (one point sixty two millimetre)
28.58(twenty eight point fifty eight) dia (OD) (Hard drawn) with tube thickness 1.2 mm(one point two millimetre)
25.4(twenty five point four) dia (OD) (Hard drawn) with tube thickness 1.2 mm (one point two millimetre)
22.2(twenty two point two) dia (OD) (Hard drawn) with tube thickness 1.2 mm (one point two millimetre)
19.1(nineteen point one)dia (OD) (Hard drawn) with tube thickness 1.2 mm(one point two millimetre)
15.86(fifteen point eighty six) dia (OD) (Soft drawn) with tube thickness 1.2 mm(one point two millimetre)
12.7(twelve point seven) dia (OD) (Soft drawn) with tube thickness 1.2 mm(one point two millimetre)
9.5 dia(nine point five) (OD) (Soft drawn) with tube thickness 1.2 mm(one point two millimetre)
6.4 (six point four)dia (OD) (Soft drawn) with tube thickness 1.2 mm(one point two millimetre)
Providing & fixing control cum transmission wiring of 2 (two) core x 1.5sqmm (one point five square millimetre ) copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .make KEI, ,Finolex, Polycab
Supplying, Installation, Testing and Commissioning of aluminium ducting material as per technical specifications and drawings complete with all fitting, accessories, dampers, vanes, take offs, canvas connections transformation. The rate shall include suspension and supporting arrangement with angle iron and dash fasteners. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Tata/Sail
22 (twenty two) Gauge
20 (twenty)Gauge
Supplying, Installation, Testing and Commissioning of GI ducting material as per technical specifications and drawings complete with all fitting, accessories, dampers, vanes, take offs, canvas connections transformation. The rate shall include suspension and supporting arrangement with angle iron and dash fasteners. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Tata/Sail
24 (twenty four)Gauge
22(twenty two) Gauge
20 (twenty)Gauge
Supplying, Installation, Testing and Commissioning Extruded Aluminium powder coated supply air linear grills without volume control dampers and mounting frame.finished in approved shade and defuser.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .make:- Systemair /Caryair/ Airmaster / Ruskin-Titus / Airflow / Tristar
Supplying, fixing, testing and commissioning of Anodised black aluminium volume controls dampers for supply air as per drawing and specifications to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
Supplying, fixing testing and commissioning of Fire Dampers as per Fire rating standards made of GI sheet metal as per drawing and specifications to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .make:-Honeywell / Siemens / Johnson controls / Belimo
Supplying, Installation, Testing and Commissioning extruded aluminium Air louvers with bird screen in accordance with approved shop drawings and specifications complete as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax, sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Kraft,Mapro,Carryaire,Pineaire
Supplying, Installation, Testing and Commissioning Actuator for fire damper to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .make:-Honeywell / Siemens / Johnson controls / Belimo
Supply & Erection of 19 mm (nineteen millimetre) thick nitrile duct insulation with Aluminium foil. The thermal insulation shall be 25 mm(twenty five millimetre) thick non-fibrous, fire retardant, closed cell, tri- dimensional chemically crosslinked polythylene foam, confirming to class O' for fire propagation and class 1 for surface spread of flame & factory laminated aluminum foil complete all as specified and directed.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Aflex,Kflex,Armacell
Supplying, Installation, Testing and Commissioning of Acoustic insulation of initial part of supply air ducting with 15 mm(fifteen millimetre) thick open cell class 0 (zero)insulation to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: Aflex,Kflex,Armacell
Supply, installation, testing and commissioning of fire retarded Poreless canvass for outlet connection of the AHUs to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
9000(Nine thousand) CFM; SP 10 mm(ten millimetre) of wg; Power 2.25(two point twenty five) KW, 4 (four)Pole, 710 mm(seven hundred ten) dia for - Liftwell Pressurisation (Axial)
10500(Ten thousand five hundred) CFM; SP 10 mm(ten millimetre) of wg; Power 3.75(three point seventy five) KW,4(four) Pole, 710 mm(seven hundred ten millimetre) dia for - Staircase Pressurization (Axial )
200(Two hundred) CFM Inline Fan @ 10(Ten) MM SP
300 (Three hundred)CFM Inline Fan @ 10(Ten) MM SP
500(Five hundred) CFM Inline Fan @ 10(Ten) MM SP
600(Six hundred) CFM Inline Fan @ 10(Ten) MM SP
800(Eight hundred) CFM Inline Fan @ 10 MM SP
900(Nine hundred) CFM Inline Fan @ 10(Ten) MM SP
1300(One thousand three hundred) CFM Inline Fan @ 10(Ten) MM SP
1500(One thousand five hundred ) CFM Inline Fan @ 10(Ten) MM SP
Supplying, installing, testing and commissioning of direct drive industrial propeller fans. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like wire guard, bird screen and fixed louvers for weather protection as required. Speed regulator and all other accessories required to complete the installation shall be included.including five year warranty The fan shall be of following rating.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.300(Three hundred) mm dia, Noise level 38(thirty eight) DB at 3m (three metre),fan suitable for 220±6% volts 50 (fifty) cycles, 1 (one )phase AC supply. make:- Nicotra / Kruger / Flaktwoods / Green Huck/ Caryiare
Supply, laying, testing and commissioning of Power cabling XLPE insulated, PVC sheathed, armoured, copper conductor of 1.1 KV grade on cable tray including cable end termination complete with brass compression gland, crimping thimbles to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Make: KEI/Finolex/Polycab
4(four)C x 10 Sqmm Copper
4(four)C x 6 Sqmm Copper
4(four)C x 1.5(one point five)Sqmm Copper
3(three)C x 2.5 (two point five)Sqmm Copper
3(three)C x 1.5 (one point five)Sqmm Copper
Supply and fixing of perforated of indicated thick CRCA GI perforated cable tray painted of required colour, of following sizes complete with bends/tee joints, coupling plate & nuts bolts etc. including Supporting structure as per specification complete as required. to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
200mm(two hundred millimetre) wide & 50mm(fifty millimetre) deep
300mm (three hundred millimetre)wide & 50mm (fifty millimetre) deep
Providing and fixing 6 (six) SWG dia G.I. wire on surface or in recess for loop earthing as required.to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
Providing and fixing GI Strip 25x3 mm (twenty five X three) to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .
M & L for Earthing complete with Galvanised steel earth plate electrode of size 600 x 600 x 6 mm(six hundred X six hundred X six) thick buried directly in ground with earth pit not less than 3.25 (three point twenty five)metre deep below ground level with top edge of plate not less than 2.5 (two point five)metre below normal ground level connected to galvanised iron strip 25x4 mm (twenty five X four millimetre)as earth lead strip by means of nuts, bolts, check nuts, washers of galvanized iron as steel all as shown electrical plate No 3 (three)connected to earthing test point all as specified or indicated including testing on completion, surrounded from all sides by mixture of charcoal and common salt and elctrode by means of steel and GI pipe light grade 20mm (twenty millimetre) bore dia bore for watering funnel with wire mesh, CI cover with frame , PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified. NOTE : 1. The unit rare includes for protectionh GI pipe of 40mm(forty millimetre)and watering pipe of 20mm(twenty millimetre)bore including excavation for earth pit in any type of soil/disintegrate rock. 2(two). Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to acheive desired result as the soil resisitivity is very high. 3(three).The cost of GI strip of 25x4(twenty five X four) from top of earth plate upto 7.5 (seven point five) metre above ground level isdeemed to be included in the unit rate. 4(four). All the joints in GI strip and connectgion with earth plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5(five).Costing of welding and nut bolts are deemed to be included in the unit rate to complete the job including five year on site warranty. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble Note:- In specifications Max-± 5% deviation in parametres will be allowable provided that it may not effect the performance of the system.
Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Comprehensive Annual maintenance contract 2nd year after one year warranty period.
Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Comprehensive Annual maintenance contract for 3rd year
Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Comprehensive Annual maintenance contract for 4th year
Comprehensive Annual maintenance contract of whole VRV/VRF system including comprehensive maintenance of All Cassette and hi wall Units complete including servicing, repair/ replacement of all defective spare parts blower motor, compressor, gas charging etc as required to running the system in working condition .Attending to any number of breakdowns calls during normal working hours on all working days.Providing of four quarterly preventive services mandatory.inclusive of Refrigerant gas charging or topping up during leakage repairing .All the equipment’s/installations shall always be kept in good and trouble-free operating conditions.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble .Comprehensive Annual maintenance contract for fifth year
DG Set: Providing, installing, testing and commissioning of 'silent type' diesel generating set having prime power rating of 750(seven hundred fifty) kVA, 415V(four hundred fifteen voltage) at 1500(one thousand five hundred) RPM, 0.8 (zero point eight)lagging power factor at 415V(four hundred fifteen voltage) suitable for 50(fifty)Hz, 3 (three)phase system & for 0.85 (zero point eighty five)load factor and consisting of the following: (Rate shall include the testing of DG set at factory using resistive load for 12Hrs (twelve hours) at full load and further 1(one) hour at 10 % over load) Note: DG set shall be compatible for synchronization, parallel operation and also compatible for BMS integration. Specification, terms and conditions of the tender documents has to considered while quoting rate. Nothing extra shall be payable.Diesel Engine: Diesel engine 4(four) stroke liquid cooled, electric start, of suitable BHP at 1500(one thousand five hundred) RPM suitable for above output of alternator at 40(forty)degree C, 50%(fifty percent) RH & at 1000m(one thousand metre) MSL and conforming to BS649, IS10000(ten thousand), capable of taking 10% (ten percent) overloading for one hour after 12 (twelve)hours of continuous operation. The engine will be fitted complete with all the required accessories. (The engine shall conform to latest CPCB norms and specifications amended up to-date)Engine mounted instrument panel fitted with and having digital display for followingStart-stop switch with key Coolant temperature indicationLubrication oil pressure indication.Lubrication oil temperature indication Battery charging indication, RPM indication Over speed indication Low lub. Oil trip indication Engine hours indication Make:-cummins/ Caterpillar/ VOLVO/Mitsubishi/ Kirloskar Alternator : Synchronous alternator rated at 750 (seven hundred fifty)KVA , 415V(four hundred fifteen voltage) at 1500(one thousand five hundred) RPM, 3(three) phase 50(fifty)Hz, AC supply with 0.8 lagging power factor at 40 (forty)degree C, 50%(fifty percent) RH & at 1000m(one thousand metre) MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-exited and self-regulated through AVR conforming to IS:4722(four thousand seven hundred twenty two) / BIS 2613(two thousand six hundred thirteen) suitable for tropical conditions and with class-F/H insulation.Make; Kirloskar/Siemens/GEC/Stamford/ Leroy Somer
Acoustic Encloure Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel necessary reinforcement which shall be installed on existing surface and vibration isolation arrangement as per recommendations of manufacturer. PCC foundation (M 20(twenty) Grade) of suitable size shall be provided as per CPWD specification Fuel Tank: Daily service fuel tank of 990 (nine hundred ninety)litres (as per OEM) capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia. complete with valves, level indications & accessories as required as per specifications.Exhaust System Dry exhaust manifold with hospital exhaust silencer and catalytic converter.Starting system.12V(twelve voltage)/24V(twenty four voltage) DC starting system comprising of starter motors, voltage regulator and arrangement for initial excitation complete with suitable nos of batteries as per OEM recommendation. Enclosure Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specification.
Annual comprehensive maintenance contract of 2 (two)nos. 750 (seven hundred fifty) KVA DG SET Through OEM for five years including two year warranty period consisting of monthly visit to check the general condition of generator. Check and set operation parametres as specified by company. The rate include one Service in year for five year including consumable materials shall be contractor scope .check and monitor the performs during each visit.To check & ensure optimum performance of sub assembles of machine, fuel timming, tappet clearance etc, for engines and reset the same as require. To check & set all the fasteners, operation of warning devices, operational parametres of breakdown of engines..if any breakdown occure in dg set ,the breakdown should be check & rectify within 24 (twenty four) hour/minimum time period by service engineer. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supply and fixing MS Channels and MS angles on existing CC foundation for supporting the exhaust piping of the DG set including painting with zinc chromate primer and epoxy paint, etc as required.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supply and fixing exhaust piping of following dia welded black MS, 'B' class pipe conforming to IS:1239 cut to required lengths and installed with necessary bends and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool / rockwool, 50 mm (fifty millimetre) thick, wire mesh & aluminium cladding etc. as required.150 mm ( one hundred fifty millimetre) dia The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supplying and fixing true power make advanced earthing system having pure copper pipe 3(three) metre long 50 mm (fifty millimetre) dia with terminal size 50x6 mm (fifty into six millimetre) ,internal strip size 25x3 (twenty five intothree )with 50 kg (fifty killograms) compound including exvation of pit and refiling the same and making earthing pit cover 13 (thirteen) inch dia as required complete in all respect. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.make :-True power ,Earth plus,Ashloka of Engineer-in -charge.
Providing and fixing 25mm (twenty five millimetre) into 5mm (five millimetre) copper strip on surface or in recess for connections etc. as required. (Jointing shall be done by overlapping and with 2(two) sets of brass nut bolt & spring washer spaced at 50mm(fifty millimetre)The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Providing, laying and fixing of PVC round sheathed 4 core 2.5 sqmm copper conductor flexible cable for voltage grade up to 1100 ( one thousand one hundred) volt , as required complete in all respect.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make :-Finolex/Havell/Polycab/KEI
Supplying and fixing 25 mm ( twenty five millimetre) sizes of PVC conduit heavy class along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. make :-Diplast/BEC/Polyfit. as approved by Engineer-in-Charge
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1(one point one) KV grade of following sizes direct in ground including excavation and refilling the trench including, lugs, glands etc as required, but excluding sand cushioning and protective covering.Armoured cable 300 sq. mm (three hundred square millimetre) 3.5 core (three point five core) as per latest BIS. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make:-KEI,Havells, Finolex, Havell's or as approved by Engineer-in-charge
Provding and refilling of high speed diesel for 750 (seven hundred fifty) KVA. The rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
CCTV : Supplying Installation Testing and Commissioning of 5(five)MP/6(six) MP IP IR Bullet Camera having following specifications, type of lens and features etc :- 1(one) Type of Camera: Bullet Camera 2(two)) Image Sensor: 1(one)/2.8(two point eight)" or better progressive Scan CMOS get color image even at night condition 3(three) Signal System: PAL/NTSC 4(four) Minimum Illumination: 0.006(zero point zero zero six)Lux@ F1.4(one point four), AGC ON, 0 lux with IR or better 5(five) Imaging: 1(one)/3(three)s to 1(one)/30000(thirty thousand)s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6(six) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50(fifty) dB 8) Lens Type & Focus: as given below. 9(nine) Day & Night: True Day & Night HighPerformance Mechanical IR cut filter with auto switch, IR SourceInbuilt IR LED's with effective distance upto 50 (fifty)Mtrs integrated IR and 30 (thirty)Mtrs for colour view in night. 10(ten) Video Compression (Minimum): H.265(two hundred sixty five) or better, Audio:- G.711(seven hundred eleven)U/A, G.711(seven hundred eleven)Mu, G.726(seven hundred twenty six), AAC, G.723 11) Wide Dynamic Range: WDR (120(one hundred twenty)dB or more) 12twelve() Digital Noise Reduction: DNR (2D/3D) On/Off 13) Streaming: Triple streaming, configurable 14(fourteen) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5(five)MP/6(six)MP @25(twenty five)/30(thirty) fps, Sub streams: D1@25(twenty five)/30(thirty) fps or better 15) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser 16) Profile Management: User configuration import, export 17(seventeen) Security: User Authentication, Digital Water Marking 18(eighteen) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 (five hundred twelve)GB. It should be supplied with minimum 128(one hundred twenty eight)GB memory Card. 19(nineteen) Recording Management: Format SD, overwrite, storage management, video to NAS device,20) Edge Analytics: Tripwire, Intrusion, Motion Detection 21) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 22twenty two() Alarm Support: It should have 1/1 Alarm In/ Out Port 23(twenty three) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and Speaker (As per site requirement) with G.711U/A / G.711Mu/ AAC/ G.726 audio compreesion 24(twenty four) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,
25 System Capability: ONVIF 26(twenty six) VMS: Camera shall support open source VMS 27(twenty seven) Cyber Security: trusted boot, AES 256 (two hundred fifty six) bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, , video encryption, IP/MAC filtering, HTTPS, trusted upgrade. 28(twenty eight) Ethernet: 1 RJ 45 (forty five)10/100 ( ten oblique one hundred) Ethernet port 29 (twenty nine) Power Input: The camera should support simultaneous dual power input—12 (twelve) VDC (via power adapter) and PoE—to ensure continuous operation in the event of a failure in one power source. 30(thirty) Power Requirement: 12 (twelve)VDC/24 (twenty four) V DC/PoE (802.3af)/ePoE 31) Enclosure: IP67 weather proof, IK10 32) Operating Condition: Ambient Temperature:- (-)05° (zero point five degree) C to 50° (fifty degree) C, humidity 95% ( ninety five percent) (max) (non-condensing) 33) IR life: 40000(forty thousand) hours or higher 34(thirty four) Video Bit rate: 32 (thirty two)KBPS - 8(eight) MBPS or better 35(thirty five) Standards: BIS with ER, STQC Certified, CE, FCC and RoH including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make :-Bosch/Axis/ Norden/Mobotix/Infinova
5(five)MP/6(six)MP IP IR 2.8(two point eight)/ 3.6(three point six)/6(six)/8(eight)/12 mm (twelve millimetre)fixed lens
5(five)MP/6(six)MP IP IR 2.7(two point seven) to 4 mm(four millimetre) ~12(twelve) to 13.5mm(thirteen point five millimetre) or better Varifocal Motorized lens outdoor Bullet Camera.
Supplying Installation Testing and Commissioning of 2(two)MP Fixed Lens IP IR Outdoor Bullet Camera having following specifications and features etc :- 1(one) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 (fifty)dB,Camera should display Camera title, Date & Time in live & recorded video2)Image Sensor: 1/2.8" ( one oblique two point eight inch) or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 ( zero point zero xero six ) Lux @ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IR LED's with effective distance upto 50(fifty) metre or better and 30(thirty) metre for colour view in night, Imaging: 1(one)/3(three)s to 1(one)/30000s(thirty thousand) electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum):-Video:- H.265(two hundred sixty five) or better, H.264H, H.264(two hundred sixty four), Audio:- G.711(seven hundred eleven)U/A, G.711(seven hundred eleven)Mu, G.726 (seven hundred twenty six), AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable(Main stream: 2()twoMP (1920 × 1080(one thousand nine hundred twenty into one thousand eighty)@ 25/30 ( twenty five oblique thirty) fps Sub streams minimum: 720 (seven hundred twenty) P @ 25(twenty five)/30(thirty) fps).7(seven) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256(two hundred fifty six)-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9(nine) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512(five hundred twelve) GB. It should be supplied with minimum 128(one hundred twenty eight)GB memory Card.10(ten) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11(eleven) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection
12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP,RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 13) System Capability: ONVIF, Camera shall support open source VMS14) Ethernet: 1 RJ 45 ( forty five) 10/100 ( ten oblique one hundred) Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 ( one oblique one) Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 (twelve) VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12 ( twelve) VDC/24 ( twenty four) VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10 (ten) , Metallic body19) Operating Condition:- Ambient Temperature:- (-)05° ( zero five degree) C to 50° ( fifty degree) C, humidity 95% ( ninety five percent) (max) (non-condensing) 20) IR life: 40000 ( forty thousand) hours or higher 21) Video Bit rate: 32 (thirty two) KBPS - 8 (eight) MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Bosch/Axis/ Norden/Mobotix/Infinova
2 (two) MP @ 25/30 (twenty five oblique thirty) fps@1080 (one thousand eighty) P (1920×1080) one thousand nine hundred twenty into one thousand eighty) Outdoor Bullet Camera with 2.8/ 3.6mm (two point oblique three point six millimetre) fixed lens
2(two)MP @ 25(twenty five)/30 (thirty) fps@1080P (one thousand eighty pixel) (1920×1080)(one thousand nine hundred twenty into one thousand eighty) Outdoor Bullet Camera with 2.7(two point seven) to 4mm (four millimetre) ~12 to 13.5mm ( (twelve to thirteen point five millimetre) or better Varifocal Motorized lens.
Supplying Installation Testing and Commissioning of 5(five)/6(six)MP IP IR Dome Camera having following specifications and features etc :-1)Type of Camera: Dome Camera 2(two) Image Sensor: 1(one)/2.8"(two point eight inch) or better progressive Scan CMOS get color image even at night condition 3 (three) Signal System: PAL/NTSC 4 (four) Minimum Illumination: 0.008 ( zero point zero zero eight) Lux@ F1.4 ( one point four), AGC ON, 0 lux with IR or better 5 (five) Imaging: 1(one)/3(three)s to 1/30000 (thirty thousand)s Shutter Support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7(seven) Signal to Noise Ratio: > 50(fifty) dB 8) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR SourceInbuilt IR LED's with effective distance upto 50 (fifty)Mtrs integrated IR 30(thirty) Mtrs for colour view in night.9) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 10) Wide Dynamic Range: WDR (120(one hundred twenty)dB or more) 11) Digital Noise Reduction: DNR 2D/3D ( two D oblique three D) On/Off 12) Streaming: Triple streaming, configurable 13) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5/6MP ( five oblique siz megapixel) @25/30 ( twenty five oblique thirty) fps, Sub streams: D1 @ 25/30 ( twenty five oblique thirty) fps or better 14) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser 15(fifteen) Profile Management: User configuration import, export 16) Security: User Authentication, Water Marking 17(seventeen) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512(five hundred twelve) GB. It should be supplied with minimum 128(one hundred twenty eight)GB memory Card.18) Recording Management: Format SD, overwrite, storage management, video to NAS device,19(nineteen) Edge Analytics : Tripwire, Intrusion, Motion Detection 20(twenty) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 21) Alarm Support: It should have 1/1 Alarm In/ Out Port
22) Audio Support: It should have 1x Built-In Mic and 1/1 ( one oblique one) Audio In/ Out Port for external Mic. and Speaker (As per site requirement) with G.711 ( seventy hundred eleven) U/A/ G.711 ( seven hundred eleven) Mu/ AAC/ G.726 ( seven hundred twenty six) audio compression 23) Network Protocol: SFTP, IPv6 (six) , IPv4 (four), DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 24) System Capability: ONVIF 25) VMS: Camera shall support open source VMS 26) Cyber Security: trusted boot, AES 256 (two hundred fifty six) bit Encryption, Configuration encryption, trusted execution, Digest, security logs, , account lockout, video encryption, IP/MAC filtering, HTTPS,trusted upgrade.27) Ethernet: 1 RJ 45 ( forty five) 10/100 ( ten oblique one hundred) Ethernet port 28) Power Input: The camera should support simultaneous dual power input—12 (twelve) VDC (via power adapter) and PoE—to ensure continuous operation in the event of a failure in one power source. 29) Power Requirement: 12 (twelve) VDC/24 (twenty four) VDC/PoE (802.3af)/ePoE 30) Enclosure: IP67 weather proof, IK10 31) Operating Condition: Ambient Temperature:- (-) 05° ( zero five degree)C to 50° ( fifty degree) C, humidity 95% ( ninety five percent) (max) (non-condensing) 2) IR life: 40000 ( forty thousand) hours or higher 33) Video Bit rate: 32 (thirty two) KBPS - 8 (eight) MBPS or better 34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Bosch/Axis/ Norden/Mobotix/Infinova
5MP/6MP ( five mega pixel /six mega pixel) IP IR 2.8/ 3.6/6/8/12 mm fixed lens Dome Camera.
5(five)MP/6(six)MP ( five mega pixel /six mega pixel) IP IR 2.7 (two point seven)to 4 mm(four millimetre) ~12 to 13.5mm or better Varifocal Motorized lens Dome Camera.
Supplying Installation Testing and Commissioning of 2(two) MP IP IR Dome Camera having following specifications, type of lens and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50(fifty) dB, Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 (zero point zero zero six)Lux@ F1.4(one point four), AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 metre or better and 30 metre for colour view in night, Imaging: 1/3s to 1/30000(thirty thousand)s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711(seven hundred eleven)U/A, G.711(seven hundred eleven)Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120(one hundred twenty)db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2(two)MP (1920 ×1080)@25/30 fps,Sub streams minimum: 720(seven hundred twenty)P@25/30 fps). 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card.
10) Recording Management: Format SD, overwrite, storage management, video to NAS device 11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast 13(thirteen) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10(ten)/100(hundred) Ethernet port 15(fifteen) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12(twelve)VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body19) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified,CE, FCC and RoHS including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Bosch/Axis/ Norden/Mobotix/Infinova
2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed lens
2(two)MP @ 25(twenty five)/30(thirty)fps@1080(one thousand eighty)P (1920×1080) (one thousand nine hundred twenty X one thousand eighty)Dome Camera with 2.7(two point seven) to 4 mm (four millimetre)~12(twelve) to 13.5mm(thirteen point five) or better Varifocal Motorized lens.
Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :PTZ(Pan,Tilt and Zoom) IP IR Camera having following spcifications and features etc :- 1) IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR 2) Image Sensor: 1/2.8" or better progressive Scan CMOS 3)Signal System: PAL/NTSC 4(four) Minimum Illumination: 0.008(zero point zero zero eight) Lux@ F1.6, AGC ON,, 0 lux with IR, or better 5(five) Imaging: 1/1s to 1/30000(thirty thousand)s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Image Rotation, Multi zone Privacy Masking (Upto 24(twenty four) Area), HLC, Defog, Region Of Interest and EIS features.6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50(fifty) dB 8) Event Notification: Through Relays, E-Mails or FTP 9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR SourceInbuilt IR LED's with effective distance. The camera should have IR LED’s and cover distance up to 300(three hundred) metre or above 10(ten) Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture it.11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering. 12) Presets: 300 Presets 13) Video Compression (Minimum): H.265(two hundred sixty five) or better, H.264(two hundred sixty four), Audio:- G.711(seven hundred eleven)U/A, G.711(seven hundred eleven)Mu, G.726, AAC, G.723 14) Wide Dynamic Range: WDR (120(one hundred twenty)dB or more), HLC & BLC 15) Digital Noise Reduction: DNR (2D+3D) On/Off 16) Image Setting: Rotate Mode, ROI ,EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser 17) Profile Management: User configuration import, export 18) Cyber Security:Configuration encryption, AES 256-bit Encryption, Digest, account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution 19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 (five hundred twelve)GB . It should be supplied with minimum 128(one hundred twenty eight)GB Memory.
20) Recording Management: Format SD, overwrite, storage management, video to NAS device, remote archive access via FTP login 21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection, Tripwire, Intrusion, Object Abandon/ Missing, SMD, Face Detection 22) Network Protocol: SFTP, IPv6, IPv4, DNS,NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP, DHCP, SMTP, RTSPS. 23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be fulltime member of ONVIF and quoted models should be listed on ONVIF official website (All the certifications & Credentials should be valid on the date of technical evaluation).24) VMS: Camera shall support open source VMS 25) Connectivity: 1x LAN RJ-45 (10/100Base-T)26) Audio Support: Audio Interface : The camera should have 1/1 Audio In/Out to connect External Mic and Speaker Audio Compression : PCM, G.711U/A, G.711MU, G.726, MPEG2-Layer2, G.722.1 27) Alarm In/Out : Alarm In/out- 7/2 Ch In/Out 28) Power Input: The camera should support simultaneous dual power input—DC/ AC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 29) Power Requirement: 24 VDC, 2.5 A (± 25%), PoE+ (802.3at) 30) Enclosure & Weather Proof Standard: IP67 weather proof and IK10, TVS 8000V lightning proof, surge protection, voltage transient protection 31) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-condensing) 32) IR life: 40000 hours or higher 33) Video Bit rate: 32 KBPS - 8 MBPS or better 34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Bosch/Axis/ Norden/Mobotix/Infinova
5MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming , configurable on resolution:- Main stream: 5MP@25/30 fps Sub streams:1080p@25/30 fps, varifocal lens 3.95mm (±5mm) ~ 177.75mm (±5mm) or better with Automatic & manual Focus Adjustment provisions, 45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V: 39.4°–1.1°D: 73.1°–2.1, PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s
Supply, Installation, Testing & Commissioning of 64(sixty four)Ch or Better Upgradable to 80(eighty)Ch Embedded (on single Box or redundant box) Network Video Recorder with support of 8 HDD Bays (support up to 10(ten)TB per bay), 8(eight)MP Resolution Cameras,Bandwidth 320(three hundred twenty)Mbps ,N+N/N+M/N+1 Hot Standby, 2 HDMI, 1 VGA, RAID 5 & 6 ,Smart analytics, ONVIF (S, G & T), Alarm Interface (16(sixteen) In/ 4(four) Out), Audio Interface (1 In/ 1 Out), 2xUSB, 2xRJ45 10(ten)/100(one hundred)/1000(one thousand) Mbps LAN interface,1xRS485, 1xRS232, Rack Mounted. Certifications - CE, FCC & BIS, UL. Cyber Security/Information Security Certificate. OEM Should Have ISO 9001(nine thousand one),14001(fourteen thousand one),45001(forty five thousand one). OEM should be present and directly Registered in India from last 5 Years.including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- Bosch/Axis/ Norden/Mobotix/Infinova
Supply, Installation, Testing & Commissioning of WD 10TB HDD including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make:- WD/Seagate
SITC of LFD/Professional Display Screen or 55" LED Commercial including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.Make Samsung /LG
EPABX : Supply, Installation, Testing & Commissioning of IPC Digital EPABX System with the following configuration: 140(one hundred forty) Analog Extensions 08(zero eight) Digital Extensions 04 (zero four)CO Trunks 02(zero two) Operator Consoles 05 (zero five)Digital Phones 02(zero two) MDF Boxes (200(two hundred) Pair each) including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make: Matrix (Eternity GENX), NEC, Ericsson
Supply, Installation, Testing and Commissioning Charge including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supply, Installation, Testing and Commissioning of 2(two) Pair PVC Telephone Cable, including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make: Finolex,KEI, DLINK
Supply, Installation, Testing and Commissioning of 50 (fifty)Pair PVC Telephone Cable, including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. Make: Finolex,KEI, DLINK
Supplying and fixing of 25 mm(twenty five millimetre) dia of heavy class FRLS PVC conduit along with accessories insurface/recess including painting in case of surface conduit, or cutting the walland making good the same in case of recessed conduit as required.Make:- Diplast, BEC, NIC/AKG
Supply, Installation, Testing and Commissioning of 50(fifty) Pair DP Box with Krone Module, including petty purchase to complete the job with five year replacement warranty on site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble.
Supply, Installation, Testing & Commissioning of Telephone Set including petty purchase to complete the job with five year replacement warrantyon site .all rates are inclusive of carriage of materials within all leads and lifts and all taxes of octroi ,royality, malkana, toll tax,sale tax Gst or other taxes as imposed by the Govt time to time where applicalble. , Make: BEETEL, Model: M59(fifty nine)
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.80 MB
SBD.pdf
Tender Documents • 3.61 MB
additionaldocument.pdf
Additional Documents • 2.78 MB
BOQ_188459.xls
BOQ • 1.68 MB
Download all tender documents and submit your bid