SPL REPAIR TO BLDG NO T-352, T-376 , T-380, T-340, T-342 AND T-373 AT MIL STN SRI GANGANAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all specified and directed by Engineer-in-charge.

M&L 600x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10mm thick rendering in CM 1:4 complete all specified and directed by Engineer-in-charge.

M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed in CM 1:4. omplete all specified and directed by Engineer-in-charge.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed in CM 1:6 complete all as specified and directed by Engr in Charge

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.42 sqm but not exceeding 1.00 sqm, as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering CM 1:3 complete all as specified and directed by Engr in Charge.

M & L granite (telephone black) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms/counters/vanities etc and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite omplete all specified and directed by Engineer-in-charge.

M&L for Providing edge moulding to 18-20mm thick stone of counters, vanities etc. including machine polishing to edge to give hive gloss finish etc complete all specified and directed by Engineer-in-charge.

Dismantling galvalume sheet (corrugated semi corrugated etc) sheet in roof covering complete all specified and directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated manglalore profile steel sheet 0.50mm thick of any colour red having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with J type or L type or cranked hooked and necessary fitting as required complete all specified and directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour red having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with J type or L type or cranked hooked and necessary fitting as required complete all specified and directed by Engineer-in-charge.

Dismantling Wall and ceiling boards (fibre, pulp, ACinsulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description complete all specified and directed by Engineer-in-charge.

S&F Gl frame work for snap grid/seamless ceiling of size 605x605mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all specified and directed by Engineer-in-charge.

S&F 8mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all specified and directed by Engineer-in-charge.

S&F Hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all specified and directed by Engineer-in-charge.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all specified and directed by Engineer-in-charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing (to be used for frame of PVC wall paneling) complete all specified and directed by Engineer-in-charge.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all specified and directed by Engineer-in-charge.

M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged stone aggregate as in plinth protection finished even & smooth complete all specified and directed by Engineer-in-charge.

M&L100 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all specified and directed by Engineer-in-charge.

M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded stone aggregate finished even and fair complete all specified and directed by Engineer-in-charge.

Dismantling of brick work built in cement mortar of any description complete all specified and directed by Engineer-in-charge.

M&L brickwork with fly ash Bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all specified and directed by Engineer-in-charge.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all specified and directed by Engineer-in-charge.

All as per item No 23 above but except bricks complete all specified and directed by Engineer-in-charge.

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all specified and directed by Engineer-in-charge.

M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall fair faces of wall surfaces finished even & smooth w/o using extra cement complete all specified and directed by Engineer-in-charge.

M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall other than fair faces of wall surfaces finished even & smooth w/o using extra complete all specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of any description and applying two coats of Premium acrylic emulsion paint over a coat of primer and including 3mm thick wall care putty complete all specified and directed by Engineer-in-charge.

M&L for complete removal of existing treatment and applying two coats of Premium acrylic emulsion paint over a coat of primer and including 3mm thick wall care putty including preparation of old surfaces complete all as specified and directed by Engr in Charge

M&L two coats of acrylic weather coat paint with including 3mm thick putty finish on newly plastered wall surfaces over a coat of primer including preparation of surface complete all as specified and directed by Engineer - in - Charge.

M&L two coats of acrylic weather coat paint with including 3mm thick putty finish to old surfaces of walls after complete removal of existing treatment including preparation of surfaces over a coat of primer. complete all as specified and directed by Engineer - in - Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all specified and directed by Engineer-in-charge.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all specified and directed by Engineer-in-charge.

Taking down steel /wooden window / ventilators not exc 1.50 sqm each complete all specified and directed by Engineer-in-charge.

S&F fabctory made Fibreways brand fiber glass Reinforcd plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fibre retardant grade unsaturated polyester resin and chopped mat door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all sides M S Stay shall be provieded at the bottom to stay shall be provieded at the bottom to steady the frame complete all specified and directed by Engineer-in-charge.

S&F fabctory made Fibreways brand fiber 30mm thick glass Fibre Reinforced plastic (FRP) Paneled door shutter of required coloured and approved brand and manufacture made with fibre retardant grade unsaturated polyster resin moulded to 3mm thick FRP Laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all specified and directed by Engineer-in-charge.

M&L Anodised aluminium frames for fixing of false ceiling including jointing cleats, required hangers for fixing etc. complete all specified and directed by Engineer-in-charge.

S&F seamless PVC false ceiling premium/heavy quality material. 6-8mm thick, fixed on alluminum/GI frames (Frames should be measured and paid saperately) with GI/SS/Brass screws in decorative pattern as complete all specified and directed by Engineer-in-charge.

M&L anodised aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all specified and directed by Engineer-in-charge.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, powder coated aluminum snap beading screws etc. complete all specified and directed by Engineer-in-charge.

S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) and including aluminium grill complete all specified and directed by Engineer-in-charge.

S&F 100mm long butt hinges, heavy weight, cold rolled mild steel complete all specified and directed by Engineer-in-charge.

S&F aluminium handle cast type anodised, 150mm long complete all specified and directed by Engineer-in-charge.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all specified and directed by Engineer-in-charge.

M&L two coats of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and directed by Engineer-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all specified and directed by Engineer-in-charge.

Dismantling Framed/unframed timber scantling 40 sqcm and over in section in any postion complete all specified and directed by Engineer-in-charge.

S&F Second class, clean sawn timber framed/unframed hard-wood in scantlings in any postion complete all specified and directed by Engineer-in-charge.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement /flush jet, (excluding fixing bolts, flushing cistern and flush pipe complete all specified and directed by Engineer-in-charge.

Suuply and fix in repairs vitreous china wash hand basin counter type white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold'' with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all specified and directed by Engineer-in-charge.

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all specified and directed by Engineer-in-charge.

S&F in repair CP brass toilet paper holder complete all specified and directed by Engineer-in-charge.

Supply and fix stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends Bore of pipe in 20mm, fixed in repairs complete all specified and directed by Engineer-in-charge.

Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all specified and directed by Engineer-in-charge.

S&F in repairs15mm bib taps cast copper alloy, chromium plated fancy type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixedcomplete all specified and directed by Engineer-in-charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all specified and directed by Engineer-in-charge.

S&F PVC gratings 100 mm dia of PTMT fixed in repairs.(Minimum weight 25 gms ) complete all specified and directed by Engineer-in-charge.

S&F brass CP shower rose 125mm size and 15mm dia, fixed in repairs complete all specified and directed by Engineer-in-charge.

S&F in repair CP towel rack 24" long fixed with CP brass screws complete all as specified and directed by Engr in Charge. complete all specified and directed by Engineer-in-charge.

S & F in repair 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed by Engineer-in-charge.

S&F PVC bathroom mirror cabinate of size 600mmx450mm, premium quality, fixed to wall with chromium plated brass screws and cup washers complete all as specified and directed. complete all specified and directed by Engineer-in-charge.

S&F corner glass shelve for complete all as specified and directed bt Engr-in-Charge.

S & F for floor door stopper of aluminium alloy body and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring complete all specified and directed by Engineer-in-charge.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all specified and directed by Engineer-in-charge.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all specified and directed by Engineer-in-charge.

S & F Galvanised steel water tubing 15 mm bore "medium grade" with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all specified and directed by Engineer-in-charge.

Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all specified and directed by Engineer-in-charge.

S & F GI steel water tubing 20mm bore "medium grade" with all fittings and fixed complete to walls ceiling or laid in floors complete all specified and directed by Engineer-in-charge.

Fixing only tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all specified and directed by Engineer-in-charge.

Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all specified and directed by Engineer-in-charge.

S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity. complete all as specified and directed by Engineer-in-Charge. Note : PVC Tank shall be ISI marked and having two layer.

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all specified and directed by Engineer-in-charge.

Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches, if required complete all specified and directed by Engineer-in-charge.

M&L for 100mm bore cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all specified and directed by Engineer-in-charge.

M&L for 75mm bore cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all specified and directed by Engineer-in-charge.

M&L for 100mm bore cast iron Bends complete all specified and directed by Engineer-in-charge.

M&L for 75mm bore cast iron Bendscomplete all specified and directed by Engineer-in-charge.

S&F in Repair stainless steel curtain rod, mild steel, chromium plated 25mm dia with fixing of decoreted type CP brackets, CP stops, CP rollers including end knobs etc complete all specified and directed by Engineer-in-charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr in Charge.

S&F in repairs Door closer hydraulically regulated (aluminium extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixedfixed complete all as specified and directed by Engr in Charge.

S & F in repair brass mortice lock, vertical type, size 100 mm and 4 lever type complete all specified and directed by Engineer-in-charge.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) complete all as specified and directed by Engr in Charge.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) concrete bed to drain pipes for 150mm boreincluding packing under, and haunching against the sides of pipes after they are laid andall as specified and directed by Engr-in-charge

M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all specified and directed by Engineer-in-charge.

M&L Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all specified and directed by Engineer-in-charge.

M&L 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments including 20mm of screed bed in CM 1:4 complete all specified and directed by Engineer-in-charge.

M&L for 150mm bore (internal dia) salt glazed stone ware drain pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all specified and directed by Engineer-in-charge. (Note : concrete bed under packing & hanching shall be measured and paid for separately).

S&F wall hung WC with UF Seat Cover ,Hinges, Accessories Set Size 385 x 595 x385mm white complete, including concealed body flushing cistern with hinging arrangement, complete all specified and directed by Engineer-in-charge.

S&F vitreous China urinals,with Fixing Accessories set Size 375 x 315 x 620mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing complete all specified and directed by Engineer-in-charge.

S&F soap dish CP brass 100mm dia (round or oval) fixed to walls or dados. complete all as specified and directed by Engineer - in - Charge.

S&F frameless rectangular/Square, 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection. mounted on wall with necessory fiments complete all specified and directed by Engineer-in-charge.

S&F frameless rectangular LED Mirror with touch switch 600mm x800 mm x5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection. mounted on wall with necessory fim complete all specified and directed by Engineer-in-charge.

S&F Corner glass shelf with bracket and 5 mm thick glass shelf with stainless rails complete all as spesified and directed by Engineer-in -charge.

S&F chromium plated tubular towel Ring Square/round complete all as specified and directed by Engineer - in - Charge

S&F 15mm bore bib cock with wall flange fency type and aerator cast copper alloy, chromium plated fency type screwed for Iron pipe complete all specified and directed by Engineer-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr in Charge.

-sitto- all as above item No 101 but exc 1.50 but n.exc 3.00 mtr in depth complete all specified and directed by Engineer-in-charge.

M&L Cement concrete type D2 1:4:8 (using 40mm graded agreegate) in foundations, filling and mass concrete complete all specified and directed by Engineer-in-charge.

M&L For providing RCC M-25 (design mix) (20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr in Charge.

M&L for providing RCC M-25 (design mix)(20 mm graded stone aggreagate) Columns, pillars, piers, posts and struts complete all as specified and directed by Engr in Charge.

M&L for providing RCC M-25 (20 mm graded stone aggreagate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr in Charge.

M&L for providing RCC M-25 (design mix) (20 mm graded stone aggreagate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr in Charge.

M&L for providing RCC M-25 (design mix) (20 mm graded stone aggreagate) Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed by Engr in Charge.

Formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr in Charge.

-ditto- all as per item No 108 above but for columns complete all specified and directed by Engineer-in-charge.

-ditto- all as per item No 108 above but for beams complete all specified and directed by Engineer-in-charge.

-ditto- all as per item No 108 above but for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work complete all specified and directed by Engineer-in-charge.

-ditto- all as per item No 108 above but for fins, louvers, fascia complete all specified and directed by Engineer-in-charge.

M&L providing reinfoced cement concrete M-25 (design mix) in cement concrete 1:2:4 Type B1(20mm graded aggregate) as chajjas etc and similar work complete all as specified and directed by Engineer-in-Charge. (Note : The rate quoted shall be deemed to include use and waste of necessary form work)

M&L MS TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

Ditto as per item No 115 above, but 6mm to 8mm dia complete all specified and directed by Engineer-in-charge.

Ditto as per item No 115 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all specified and directed by Engineer-in-charge.

Removing excavated material of soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all specified and directed by Engineer-in-charge.

M&L for Providing precast cement concrete 1:2:4 type B0 (12.50 mm graded stone aggregate) louvres and jallies in , 25mm thick (measured solid), including all mould- ings but excluding frame set in CM 1:4 (Pre cast frame shall be measured and paidseparately ) complete all specified and directed by Engineer-in-charge.

M&L for Providing Providing precast cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) set in CM 1:4 in window or door cills, bressumers, kneelers, apex stones, pier caps, columns, posts, pintle blocks, corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all specified and directed by Engineer-in-charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

Dismantling and taking down fluorescent/LED tuble light/wall light/ ceiling lingt single/bulk head / tube light/ suspension light/mirror light double of any wattage or size street light fittings for repair / Refixing purpose complete all as specified and directed by Engineer - in - Charge.

Fixing only LED lights fitting 1x20/25W, 220V, LED tube light/securirty light/bulk head/mirror light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes suitable length and thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No. 125 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified by Engineer-in-Charge.

All as per Srl item No. 125 here in before but for one three pin socket outlet 5 amp on same board complete all as specified by Engineer-in-Charge.

All as per Srl item No. 125 here in before but for one switch socket combination 6 pin 5/15 Amp on independent board with copper conductor 2.5 Sqmm complete all as specified by Engineer-in-Charge.

All as per Srl item No. 125 here in before but for call bell point complete all as specified by Engineer-in-Charge.

S&F modular Switch 5/6 Amps single pole one way, one module with White cover plate with frame, alongwith metal flush box 1/2 module complete all as specified by Engineer-in-Charge.

S&F modular Switch socket combination 5 pin, type 5/6 Amps in 1 flush type with White cover plate with frame, 3 module alongwith metal flush box 3 module complete all as specified by Engineer-in-Charge.

S&F modular Switch socket combination 6 pin, type 15/16 Amps flush type with White cover plate with frame, 3 module alongwith metal flush box 3 module complete all as specified by Engineer-in-Charge.

S&F modular socket outlet 5 pin 5 Amps flush type with White cover plate with frame, 2 module alongwith metal flush box 2 module complete all as specified by Engineer-in-Charge.

S&F modular bell push 5 Amp, one modufle with white cover plate with frame, 1 module alongwith metal flush box 1/82 module complete all as specified by Engineer-in-Charge.

S&F ceiling rose surface bakelite three terminals flush type complete all as specified by Engineer-in-Charge.

S&F in replacement compat & decorative energy efficient LED mirror light fitting, with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge

S & F in replacement of existing light fitting with LED batten with aluminium housing and integarated electronic driver, 20 watt having input voltage AC90-300V, 50Hz, 6500K and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S & F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge

S & F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connection up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer - in - Charge.

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft galre free light complete with driver, holders & LED lamp suitable for roof ceiling inlcuding connectiong up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer - in - Charge.

S&F Decorative, wall mounting, fixture made up of polycarbonate suitable for 9 W LED lamp B22 base complete all as specified and directed by Engineer - in - Charge.

S&F Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.

S&F modular stepped type, fan regulator not less than 120 watt two module for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge.

S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheated 6 sqmm (Normal Area) FRLSH stranded copper conductor drawn in and including pvc conduit dia 25mm "medium quality" conduit including 6.00 sqmm (Norminal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existeing colour, necessary juction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable one & run of PVC counduit shall be measured as "One Run")

S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheated 4 sqmm (Normal Area) FRLSH stranded copper conductor drawn in and including pvc conduit dia 25mm "medium quality" conduit including 4.00 sqmm (Norminal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existeing colour, necessary juction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable one & run of PVC counduit shall be measured as "One Run")

S&F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 volts ISI makred 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs MCCB TP&N 63 Amps with breaking capacity 16KA, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S & F in replacement MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate No.3 of SSR Part I and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge

S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge .

S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy powder coated surface mounting VTPN 4 ways, 415 volts ISI makred 250 Amps bus bar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB (V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer - in - Charge.

Hanging only ceiling fan incl painting (M.D. Supply) and connectiong up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer - in - Charge.

Fixing only exhaust fan incl painting (M.D. Supply) and connecting up including provision of cable from ceiling rose / connector to fan and clean the existing exhuast fan with chemical solution complete all as specified and directed by Engineer - in - Charge.

S&F RJ-45 data and TV socket each for connection of data network and TV cable (dish) complete all as specified and directed by Engineer - in - Charge.

S&F 3 pin telephone socket RJ-11 with metal flush box having holes for 20mm conduit entry for telephone connection complete all as specified and directed by Engineer - in - Charge.

S&F rigide non metalic PVC conduit 20mm dia "medium grade" inclusive of all tees, bands, elbows, reducers, bell mouth tube ends and complete with all fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer - in - Charge.

S&F steel body exhaust fan of 300mm sweep,900 RPM, 240 volt, 5 Star rating complete with louvers and shutter and mounted in suitable opening arrangement in wall and connection up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including braking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color etc complete all as specified and directed by Engr -In - Charge

S&F PVC body exchaust fan 250mm sweep, 900 RPM, 240 volt, 5 star rating complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in CM (1:4) white washing matching with existing colour complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED Bedside light (White 3000k) 3 Watt, with flexible arm suitable for reading complete all as specified and directed by Engr-in-Charge.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all specified and directed by Engineer-in-charge.

Supply and lay jointing and testing and commissiong in replacement of 50 sqmm x 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wiwr armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT Cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/path/drain/culverts or passisng through pipes complete all specified and directed by Engineer-in-charge.

M&L for fixing GI tubing (light grade) 80mm dia for cable protection laid under path / trench / wall on pole complete all specified and directed by Engineer-in-charge.

M&L for boaring of holes to passing through LT cable across the road, path, cemented surfaces, tiles or all kinds of hard standing / surfaces for GI pipe 80mm complete all specified and directed by Engineer-in-charge.

Excavation in trenches not exceedig 1.5mtre wide and not exceeding 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all specified and directed by Engineer-in-charge.

Supply and filling in sand for cable protection complete all specified and directed by Engineer-in-charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Dashmesh Construction Company

PAREEK AND COMPANY

Ramdev Enterprises

Aggarwal brothers and company

KHANNA CONSTRUCTIONS