REPAIR MAINT OF HANGER LIGHTS DISPERSAL LIGHTS LIGHTING CONDUCTOR SURGE DIVERTERS HIGH MAST LIGHTS OVER HEAD CRANE WKS LED SECURITY LIGHTS GARDEN LIGHTS PERI LIGHTS AVIATION LIGHTS AND ALLIED WKS AT AFS JORHAT AND TECH AND DOM AREA UNDER GE AF JORHAT

Amount

Disconnecting/Taking down unserviceable Garden lights / Security lights / Mast Light fittings from pole /structure and other lights of any description and stacking properly at places complete all as specified and directed by Engr-in-Charge.

S&F for 20W LED post top with moonlight effect and efficient light distribution and IP65 protection, complete all as directed. Make:Crompton (Cat No- LPTH-20-CDL) or equivalent model in Philips/GE as approved by GE

S&F Cable Junction Box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 -02 No & M-25 -01 No) fixed on poles with Aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. Make : Cat part No. K-9250 of HENSEL or equivalent of make in SPELSBERG, Sintex Industries Ltd as approved by GE

M&L in repair for PVC insulated three core 2.5 sqmm multistrand aluminium conductor for connection of securiry light from Junction Box to Security light, complete all as specified and directed.

Excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, for laying of UG cables, etc. and getting out as in soft / loose Soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm as in soft / loose soil, complete all as specified and directed.

Removing excavated Materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point in Soil, complete all as specified and directed.

Taking down/out unserviceable or serviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed. (NOTE :Earth Work shall be measured and paid separately under relevant Items here-in-above).

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230 mm Spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (NOTE : For the purpose of payment, punned thick-ness of sand cushioning shall only be measured and paid ).

S&F Sub-Class 'B' brick, well burnt, laid breadth-wise along the length of cable laid in trenches over sand cushion laid for UG Cable Protection complete all as specified and directed.

Re-laying only old Brick in Trenches for Under Ground Cable Protection (Serviceable Materials obtained from Item No. 8 here-in-before), complete all as specified and directed.

M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 2 core. complete all as specified and directed.

M&L Straight Through Cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt Grade Heavy Duty with PVC/XLPE insulated Aluminium Stranded Conductor, Nominal Cross-Sectional area 10 Sqmm to 16 Sqmm, 3½ or 4 Core and Testing complete all as specified and directed.

S&F 60 Watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium aesthetically designed roadway luminaire with high power LEDs as light source & electronic driver and connecting with the cable including testing complete all as specified and directed. Make:Crompton (Cat No- LSTP-60-CDL-M) or equivalent model in Philips /GE. As approved by GE

S&F 72 Watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium aesthetically designed roadway luminaire with high power LEDs as light source & electronic driver and connecting with the cable including testing complete all as specified and directed. Make:Crompton (Cat No- LSTP-72-CDL-M) or equivalent model in Philips/GE. As approved by GE

S&F 90 Watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium aesthetically designed roadway luminaire with high power LEDs as light source & electronic driver and connecting with the cable including testing complete all as specified and directed. Make:Crompton (Cat No- LSTP-90-CDL-M) or equivalent model in Philips/GE. As approved by GE

Taking down/out unserviceable GI / HDPE Pipes of any descriptions, laid in trenches and/or fixing with Walls/Poles complete all as specified and directed.

S & F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm² fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F Galvanised Iron Pipe 40mm Bore (dia) 'Light Grade' for protection of UG Cable, laid in Floors/ Road Crossing, fixing to Pole with Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and directed.

S&F galvanised iIron pipe 50mm bore (dia) "Light Grade" for protection of UG cable, laid in floors / road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and directed.

Cutting hard-standing / WBM / bituminous road of any type upto a depth of 40 cm and width upto 30 cm for laying of pipe line incl getting out / removing the surplus soil complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4), type B-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for road complete all as specified and directed.

S&F 12W LED bulb pin type, complete all as specified and directed.

S&F Lamp holder PVC/ polycarbonate type with cord grip cap suitable for pendant fitting, complete all as specified and directed.

S&F 300 Watt LED flood light fitting, LED floodlight luminaire with high pressure die cast housing acting as heat sink in order to ensure better performance of the luminaires, complete including clamp,nut,bolt and other accessories for fixing including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make - Crompton Cat No-LSFO-300-CDL/60-M or its equivalent make of Philips/ GE as approved by GE.

S&F 100Watt highbay light luminaire with high pressure die cast housing acting as heat sink in order to ensure better performance of the luminaires, after taking down old unserviceable light fitting, complete all as specified and directed. Make - Crompton, Cat No-LHB11-100-CDL/60-M or its equivalent make of Philips/ GE as approved by GE

S&F post top light (Garden Light) top cover suitable for existing light fittings, including screws,nut & bolts etc. complete all as specified and directed.

M & L for mild steel nuts, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,n exc 5cm long,diameter of neck in 5mm to 10mm, complete all as specified and directed.

S&F 30 Watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die- cast aluminium aesthetically designed roadway luminaire with high power LEDs as light source & electronic driver,, including cable for connection after taking down old unserviceable light fittings, complete all as directed. Make:Crompton (Cat No- LSTS-30-CDL-M) or its equivalent model in Philips/ GE as approved by GE.

M&L for painting of steel tubular trident pole of 2.5 to 5 metre long with two coats of synthetic enamel paint incl numbering of pole no by stensils, cleaning the surface of pole by rubbing with emery paper to remove rust, dust etc complete all as specified and directed.

M&L for painting to steel tubular pole 8.5 to 11 metre long with two coats of synthetic enamel paint up to 1.50 metre height from ground level in 30 cm alternative black and yellow strips and remaining portion with alluminium paint incl numbering of pole no by stensils and MS frames like channel,clamps, angle, D-clamps etc with two coats of aluminium paint complete all as specified and directed.

M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 25 sqmm 3.5 core, complete all as specified and directed.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore, under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and directed. Note: Pipe to be measured separately.

M&L for PCC (1:2:4) type B1 (using 20 mm graded aggregate) as in coping for pole including form work and finishing the surfaces even and smooth, dismantling etc complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S RK SAHA AND CO

M/S DILIP GOSWAMI

M/S BARUA REFRIGERATION WORKS

M/S ALO ELECTRICAL HOUSE

M/S D J ENTERPRISE

M/S DHAR AND DHAR

THE SUPPLY AGENCY

Bidder Name

M/S RK SAHA AND CO

M/S D J ENTERPRISE

M/S KESHAVECONSTRUCTIONS

THE SUPPLY AGENCY

M/S ALO ELECTRICAL HOUSE

M/S DHAR AND DHAR

M/S BARUA REFRIGERATION WORKS

M/S DILIP GOSWAMI