Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹2,300
Closing Date
24 Jun 2026, 6:00 pm2d left
Similar tender results from the same govt authority in the past 3 years.
EE(C), BSNL Civil Division-I, Hyderabad
Executive Engineer (C), BSNL Civil Division-I, Room No. 302, III floor, BSNL Bhawan, Adarsh Nagar, Hyderabad - 500063
Repair works to Aluminium partitions and false ceiling to arrest AC leakage in OBOA Switch room(first floor) and replacement of rolling shutter at 11 KV AC Chamber at TE Building, Mahabubnagar, MBN OA , MEDAK BA
2026_BSNL_281066_1
NIT No. 30/NIT/CECTSCZ/HYD/2026
Open Tender
Civil Works
30 days
Mahabubnagar
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
Accounts Officer (Cash), O/o PGMT, Medak BA
₹2,300
16 Jun 2026
16 Jun 2026
27 Jun 2026
16 Jun 2026
24 Jun 2026
16 Jun 2026
16 Jun 2026 - 24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 25 | Kg | 133.7 | ₹3,342.5 |
| 2Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||||
| 2.1 | Two or more coats on new work. | 15 | Sqm | 155.9 | ₹2,338.5 |
| 3Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. | |||||
| 3.1 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover. | 12 | Sqm | 3,653.2 | ₹43,838.4 |
| 4Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : | |||||
| 4.1 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). | - | - | - | - |
| 4.2 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 25 | Kg | 598.6 | ₹14,965 |
| 5Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 5.1 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 6 | Sqm | 1,505.25 | ₹9,031.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.33 MB
BOQ_328020.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid