Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAdmitted-Finance | ₹2.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.2 Cr+₹26.0 L (8.91%)Admitted-Finance | ₹3.2 Cr+₹26.0 L (8.91%) | L2 | Admitted-Finance |
| 3 | L3₹3.6 Cr+₹65.6 L (22.5%)Admitted-Finance | ₹3.6 Cr+₹65.6 L (22.5%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical 21 SWASTIK CHAMBERS GROUND FLOOR CHEMBUR MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | - | - | Rejected-Technical Not accepted as per NIT Criteria |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not accepted as per NIT Criteria |
| Sl No | Description | Qty | Unit | DIPESH ENGINEERING WORKS L2 | ENGINEERING CONSOLIDATED L1 | Vividh Hi-Fab Private Limited L3 |
|---|---|---|---|---|---|---|
| 1.00 | Fabrication, alignment, installation and erection of stainless steel-304L pipes and piping components/ fittings as per Schedule-B and other equipment as per drawings and technical specification. The work includes preparation of fabrication drawings, collection of FIM from department store, handling, transportation, storage, pickling & passivation, bending up to a bend radius of 5D using hydraulic pipe bending machine, cold bending is envisaged up to 40NB pipe size. Fabrication and erection of pipes on fabricated supports as required and supply of requisite materials other than free issue materials (FIM), setting up of fabrication shop at site, fabrication, laying of SS-304L piping along with Installation of steam ejector, identification tags, other inline equipments on the permanent support and fittings to the required elevations/levels, taking physical measurements, checking interferences, inspection and testing, documentation, making asbuilt drawings and return of balance of FIM/scrap, following standard safety practices. Inspection & testing including Dye penetrant testing of bends and hydrostatic testing of fabricted spool pieces along with fittings as per technical specification and instructions of EIC.
Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10.
Pipes ≤1" shall be considered as 1". | 12,000 | Inch meter | 450 ₹54,00,000 | 350 ₹42,00,000 | 236 ₹28,32,000 Lowest |
| 2.00 | Hydrostatic testing of Pipe Embedments, which includes cutting the blank on EP, Preparation of ends for hydrostatic test, testing and normalization for further work in under ground Vaults, supply and installation of 2 no. PVC end caps for each pipe EP after completion of activity as per technical specification and instruction of EIC. All the consumables, instruments and setup required shall be arranged by contractor.
Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10. | 1,350 | Nos. | 360 ₹4,86,000 Lowest | 1,300 ₹17,55,000 | 5,900 ₹79,65,000 |
| 3.00 | GTA WELDING of Butt/ nozzle/ miter joints of SS 304L pipe and fittings ranging from 8NB to 250NB size using ER 308L filler wire with Argon shielding and back purging, supply of all welding consumables other than that indicated in schedule B. Dye penetrant testing of root and final pass of each weld joint as per technical specification and drawing.
Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10. Completion of activity will be considered when all related testing including Radiography are completed and accepted.
Pipes ≤1" shall be considered as 1". | 6,500 | Inch dia. | 900 ₹58,50,000 | 800 ₹52,00,000 Lowest | 1,180 ₹76,70,000 |
| 4.00 | TESTING OF SS-304L BUTT WELDED JOINTS by Radiography using conventional X-ray machines/ portable Gamma ray machines, for evaluation of welded joints of SS piping at all elevations. (Repeat testing due to defective radiograph or repaired joints due to contractors fault and any additional testing necessitated due to poor workmanship or poor performance of contractor’s welders shall be done at contractor’s cost).
Arrangement of all Radiography equipment’s, tools and setting up of darkroom and pit room at the space provided at site, Supply of all consumables like films, chemicals etc. and to carryout radiography of Butt joints as identified by the EIC and development of the radiographs and its submission to department as per Tech. Specification and drawing. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement.
Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10. | 7,500 | Number of Exposures | 270 ₹20,25,000 Lowest | 540 ₹40,50,000 | 1,180 ₹88,50,000 |
| 5.00 | Supply, fabrication and instalation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). Line number/ fitting designation given by the department should be engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at a minimum of 3 locations or as per technical specification and instruction given by the EIC. | 2,500 | Nos. | 120 ₹3,00,000 Lowest | 250 ₹6,25,000 | 590 ₹14,75,000 |
| 6.00 | Supply, fabrication and erection of pipe supports, monkey ladders made out of different thickness of SS304 plates, angle, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing. | 23,500 | KG | 720 ₹1,69,20,000 | 540 ₹1,26,90,000 | 106 ₹24,91,000 Lowest |
| 7.00 | Supply and fabrication of SS304 plate for Lining of MS PLATE EP's Provided on roof slab and walls in the under ground vaults with 3mm thick SS-304 plates. Work includes Identification, cleaning and marking of MS plate EPs, drying of surfaces to be lined, chemical cleaning of SS sheets, cutting, instalation, GTAW welding and dye peneterant checking of liner plate as per technical specification and as indicated in the drawings. supply of all welding and testing consumables.
EP size's are 150x150, 200x200, 200x400, 400x400 etc. | 600 | KG | 900 ₹5,40,000 | 800 ₹4,80,000 Lowest | 5,900 ₹35,40,000 |
| 8.00 | Supply, Fabrication & installation of Pipe support MS plate EPS, with Supply and Fixing of Anchor Fastner of approved make (Hilty or equivalent) by drilling in concrete as per requirement for fixing Eps or other structures as per technical specifications and drawings or as directed by the EIC. (Representative size of EP is 200X200X12MM) (Anchor fastener size M14x 150mm long). | 150 | Nos. | 1,500 ₹2,25,000 | 1,000 ₹1,50,000 Lowest | 5,900 ₹8,85,000 |
Tender Value
₹3.4 Cr
Closing Date
3 Feb 2022, 3:00 pmClosed
Project Director, INRPC
PD Office, INRP, BARC Tarapur
UG Vault phase-I piping package of Block -105 at INRPC, BARC, Tarapur
2022_NRB_666734_1
BARC(T)/NRB/INRPC/MPT-495/2021
Open Tender
Machineries/ Mechanical Engg Items
Works
365 days
BARC Tarapur
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
Exempted
BARC Tarapur
1 Apr 2022
5 Jan 2022
4 Feb 2022
5 Jan 2022
3 Feb 2022
25 Jan 2022
5 Jan 2022 - 20 Jan 2022
21 Jan 2022
Amount
Fabrication, alignment, installation and erection of stainless steel-304L pipes and piping components/ fittings as per Schedule-B and other equipment as per drawings and technical specification. The work includes preparation of fabrication drawings, collection of FIM from department store, handling, transportation, storage, pickling & passivation, bending up to a bend radius of 5D using hydraulic pipe bending machine, cold bending is envisaged up to 40NB pipe size. Fabrication and erection of pipes on fabricated supports as required and supply of requisite materials other than free issue materials (FIM), setting up of fabrication shop at site, fabrication, laying of SS-304L piping along with Installation of steam ejector, identification tags, other inline equipments on the permanent support and fittings to the required elevations/levels, taking physical measurements, checking interferences, inspection and testing, documentation, making asbuilt drawings and return of balance of FIM/scrap, following standard safety practices. Inspection & testing including Dye penetrant testing of bends and hydrostatic testing of fabricted spool pieces along with fittings as per technical specification and instructions of EIC. Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10. Pipes ≤1" shall be considered as 1".
Hydrostatic testing of Pipe Embedments, which includes cutting the blank on EP, Preparation of ends for hydrostatic test, testing and normalization for further work in under ground Vaults, supply and installation of 2 no. PVC end caps for each pipe EP after completion of activity as per technical specification and instruction of EIC. All the consumables, instruments and setup required shall be arranged by contractor. Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10.
GTA WELDING of Butt/ nozzle/ miter joints of SS 304L pipe and fittings ranging from 8NB to 250NB size using ER 308L filler wire with Argon shielding and back purging, supply of all welding consumables other than that indicated in schedule B. Dye penetrant testing of root and final pass of each weld joint as per technical specification and drawing. Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10. Completion of activity will be considered when all related testing including Radiography are completed and accepted. Pipes ≤1" shall be considered as 1".
TESTING OF SS-304L BUTT WELDED JOINTS by Radiography using conventional X-ray machines/ portable Gamma ray machines, for evaluation of welded joints of SS piping at all elevations. (Repeat testing due to defective radiograph or repaired joints due to contractors fault and any additional testing necessitated due to poor workmanship or poor performance of contractor’s welders shall be done at contractor’s cost). Arrangement of all Radiography equipment’s, tools and setting up of darkroom and pit room at the space provided at site, Supply of all consumables like films, chemicals etc. and to carryout radiography of Butt joints as identified by the EIC and development of the radiographs and its submission to department as per Tech. Specification and drawing. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. Size of pipes involved are from 8NB to 80NB schedule 40 & 100NB to 250NB schedule 10.
Supply, fabrication and instalation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). Line number/ fitting designation given by the department should be engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at a minimum of 3 locations or as per technical specification and instruction given by the EIC.
Supply, fabrication and erection of pipe supports, monkey ladders made out of different thickness of SS304 plates, angle, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing.
Supply and fabrication of SS304 plate for Lining of MS PLATE EP's Provided on roof slab and walls in the under ground vaults with 3mm thick SS-304 plates. Work includes Identification, cleaning and marking of MS plate EPs, drying of surfaces to be lined, chemical cleaning of SS sheets, cutting, instalation, GTAW welding and dye peneterant checking of liner plate as per technical specification and as indicated in the drawings. supply of all welding and testing consumables. EP size's are 150x150, 200x200, 200x400, 400x400 etc.
Supply, Fabrication & installation of Pipe support MS plate EPS, with Supply and Fixing of Anchor Fastner of approved make (Hilty or equivalent) by drilling in concrete as per requirement for fixing Eps or other structures as per technical specifications and drawings or as directed by the EIC. (Representative size of EP is 200X200X12MM) (Anchor fastener size M14x 150mm long).
DIPESH ENGINEERING WORKS
Vividh Hi-Fab Private Limited
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.71 MB
TenderDocument.pdf
Tender Documents • 18.25 MB
TechnicalBid.xls
Additional Documents • 0.12 MB
BOQ_701750.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .