Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC NO 577 5TH MAIN D GROUP LAYOUT 60 FEET ROAD SRI GANDHAKAVAL BANGALORE 560 091 | BANGALORE | BANGALORE | KARNATAKA | 560091 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹10.2 L+₹11,775 (1.17%)Rejected-AOC NO 650 3RD CROSS MATHIKERE BANGALORE 560 054 | BENGALURU URBAN | KARNATAKA | 560054 | L2 | Rejected-AOC NOT LOWEST |
Tender Value
₹9.2 L
EMD Value
₹18,400
Closing Date
17 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri S Srinivasa Rao IDSE CWE
HQ CWE ARMY BANGALORE 101 Dickenson Road Bangalore 560042
PROVISION OF ROAD FROM 56 COY (SUP) TYPE G TO PRO BANGALORE UNDER GE (SOUTH) BANGALORE
2023_MES_614608_2
86177/E8
Open Tender
Civil Works - Roads
Item Rate
90 days
HQ CWE ARMY BANGALORE
AS PER TENDER
8 documents required · 8 mandatory
₹500
Yes
GE (SOUTH) BANGALORE
₹18,400
Yes
22 Dec 2023
4 Oct 2023
24 Nov 2023
4 Oct 2023
17 Nov 2023
18 Oct 2023
4 Oct 2023 - 11 Oct 2023
Amount
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.
Excavating in trenches, n exc. 1.5m wide and n exc. 1.5m in depth, for foundation , etc, or for shafts, well, cesspits, manholes, etc n exc. 10 sqm on plan and n. exc. 1.5m in depth and getting out soft/loose soil complete all as specified and directed.
Removing excavated soil to distance exc. 1.5 Km but n. exc 5 Km and depositing where directed at a level n.exc.1.5 m above the starting point complete all as specified .
Rolling of formation surface with power roller 8 tonne to 12 tonne.
M&L for Laying and compacting 150 mm thick (Compacted thickness) Granular Sub Base Course (GSB) grading as per Grade V as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natura sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013.
M&L for Laying and compacting 150mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers grading as pe table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 .
Preparing un surfaced WBM/ WMM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and as directed.
M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed
M&L Premix Bitumenous macadam using paving bitumen laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less laying, spreading uniformly using mechanical paver snd rolling with 8 to 10 tonne power roller to required camer and gradient complete all as specified and directed.
Bituminous premix asphaltic semi dense concerte, 40mm consolidated thickness with 5.5% binder paving bitumen (VG-30 Paving bitumen) any penetration content as in semi dense asphaltic concrete rolled with 8 to 12 tonne tandem vibratory roller and compacted to required camber and gradient by using mechanical paver machine etc,complete all as directed.
Preparing bituminous surfaces of road and marking 2.5 mm thick center lines, stop lines, dashes, arrows etc and the like n.exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint (including reflectorizing glass beads@250 gms per sqm as per IRC-35-1997)of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instructions complete all as directed. (Make: Metro road system /Shivalik / Asian) Note : 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work, cleaning road surface and working during odd hours when traffic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scratch marks or surfaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained.
M&L for Solar Road Studs made of Aluminium Alloy, 100% water proof, with high efficiency mono crystalline solar panel 2.4 V/0.3 Watt, one Ni Mh or Ni-cd recahrgeable battery ( 1.2V/1600MA), six super bright LEDs with 10000 to 18000 mcd, bearing weight of 10 Tonnes (appx) fixed as per manufacturer's instructions complete all as specified and directed. (Make: DHRUV of Dark eye or equivalent of 3M/Sun Eyes/M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd).
M&L for ABS Engineering plastic studs (Cat Eye) dynamically designed having high impact strength and fitted with 2 numbers highly reflective microprismatic retro leflective reflectors on both sides including fixing with fixing arrangewments as per manufacturer' s instructions complete all as specified and directed. (Make: Dark Eye / 3M/Sun Eyes/M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd).
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Maruthi constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .