Repair/renovation to various residential buildings under division No. III Shimla. (SH- Providing Placing PVC water storage tanks, steel work for tank staging, water proofing work, P/L G.I. pipeline 15mm 25mm dia, painting distempering work

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting Steel Surfaces with Deluxe Multi surface paint for interiors and exteriors as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied where required @ 0.80 ltr/ 10 sqm of approved brand and manufacture as directed by Engineer-in-charge within all leads and lifts.

Providing and placing polyethylene water storage tank 6 LAYERS, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Sintaxe/Spectrum MAKE)

Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1: 4 (1 cement :4 sand) admioxed with 200ml of pidiproof LW @ 200ml per 50kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete including carriage of materials in all leads and lift as per direction of Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore complete including carriage of materials in all leads and lifts. external work.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore complete including carriage of materials in all leads and lifts. external work.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts. 25mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts. 15mm nominal bore.

Providing and fixing 25mm dia G.I.tank nipple of approved brand aincluding carriage of materials within all leads and lifts.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of materials within all leads and lifts. (New work) 25mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of materials within all leads and lifts. (New work) 15mm nominal bore.

Providing and Fixing ball cock with float valve 15mm including carriage of materials within all leads and lifts.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² including carriage of materials within all leads and lifts.