REPAIR AND MAINT TO CERTAIN FURNITURE AT AGE(I) POKARAN UNDER GE(A) JAISALMER

Amount

REPAIR TO CHAIR DINNING ,(FD-16,FD-228 & FD- 279) :- Removing the existing unserviceable/Broken rear leg and S&F1st class hard wood teak rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note : Each leg shall be measured separately

Removing the existing unserviceable/ broken front leg and S&F 1st class hard wood teak front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately.

Removing the existing unserviceable/ broken Side batterns if broken and canning and S&F 1st class hard wood battern and S&F PVC Seat instead of canning complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable back rest batten and S&F new back rest batten made out of 1st class hard wood teak of size as per drawing and complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of wooden surfaces of chair dining (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIR TO BOOK CASE /SIDE BOARD/ BIN SOILED LINEN MULTI PURPOSE, (FD-26/241), (FD-287) , FD/E6/MAP/09, FD-1112 :-

Removing the existing unserviceable/ broken shutter of side board and S&F New shutter of size 400x650mm made of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003) the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest/Naina teak fixed with 40 mm wide chromium plated continuous piano hinges including CP handle, 100 mm long,01 Nos knob and magnetic catcher to stick the doors. Edges of the Shutters to be covered PVC beading 2mm thick machine pressed all around, and shown in drawing and complete all as specified and as directed by the Engineer-in-Charge. NOTE : Each leaf to be measured separately

Removing the unserviceable broken back ply of side board and S&F New 6 mm thick BWP grade plywood conforming to IS: 710 and shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

Removing the unserviceable/ broken drawers of side board and S&F New drawers made of front 18 mm thick prelaminated MDF Board exterior Grade as per existing shade both one side laminated and other side white balancing paper rest all the sides bottom etc to be made out of 12mm thick PLMDF Board exterior grade,also fixing of 40 mm knob of matching colour as per shade of Board, alongwith one set of telescopic channel existing and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge.

Preparation of surface and French polishing to side board inner and outer except prelaminated portion complete all as specified and as directed by the Engineer-in-Charge.

REPAIR TO CHAIR EASY (FD-17(M),202 & 229)

Removing the existing unsv/broken rear leg and S&F 1st class hard wood teak rear leg and shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately

Removing the existing unserviceable/ broken front leg and S&F1st class hard wood teak front leg complete all shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately

Removing the existing unserviceable/ broken arm rest and S&F 1st class hard wood teak arm rest complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each arms shall be rest measured separately

M&L for preparation of surfaces of chair easy (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIR TO CHAIR WRITING ,(FD-20, FD-250 & FD- 280)

Removing the existing unserviceable/ broken rear leg and supplying and fixing 1st class hard wood teak rear leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately

Removing the existing unserviceable/ broken front leg and S&F 1st class hard wood teak front leg complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each leg shall be measured separately

Removing the existing unserviceable/broken arm rest and S&F 1st class hard wood teak arm rest complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. Note :- Each arm shall be rest measured separately

M&L for preparation of wooden surfaces of chair writing (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIR TO TABLE 900x600x760 MM WITH AND W/O DRAWER, FD-42M/41/224/283

Removal of unserviceable leg and S&F new leg made of 1st class hard wood teak for table of size complete all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable top long rail and S&F new front top long rail made out of 1st class hard wood teak for table of size all as per drawing and as per specification complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable top short rail and S&F new front top long rail made out of 1st class hard wood teak for table of size all as per drawing and as per specification complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable long stiffener under the top and S&F new long stiffener made out of 1st class hard wood teak for table of size all as per drg and complete all as per specification and directed.

Removal of unserviceable short stiffener and S&F new short stiffener made out of 1st class hard wood for table Size all as per drawing and all as per specification complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approved quality and including one set of powder coated telescopic channels to move the drawers all as per drawing and all as per specification complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable top and S&F new top made out of18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade. Edges of the MDF Board to be fixed with 2mm thick PVC beading machine glued all around with matching colour complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of surfaces of Table 900 X 600 mm with & w/o drawer (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIR TO TABLE BED SIDE ( FD-276, 248)

Removal unserviceable plywood at back of table bed side and S&F plywood 6mm thick BWR Gde as per drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable Top and S&F new top of size 230mm X 450mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/ Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed by the Engineer-in-Charge.

M&L for french polishing of complete table exposed to view except laminated portion per drawing and complete all as specified and as directed by the Engineer-in-Charge.

REPAIR TO TABLE CENTRE/PEG TABLE/TEAPOY (FD-274)

Removing the existing unserviceable table top centre and S&F new top made out of 8 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge. .

All as per item Ser No 18.01 above but top of Peg Table. (FD-277, 384)

All as per item Ser No 18.01 above but top of Teapoy (FD-382)

REPAIRS TO SOFA SET 1/3/4/5 SEATER SEAT (FD-281/373)

Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. Note: The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM.

Replacement of cover of tapestry cloth of cushion of sofa and S&F new cover of tapestry cloth on existing foam cushion with Velcro on one edge of best quality. The cost of tapestry cloth shall not be less than Rs 350/- per meter. Shade and texture to be Jute pattern and colour to be got approved before bulk stiching and complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable long rail of seat or back side of three seater sofa set and S&F new long rail made out of first class Hard Wood teak of size 1590x100x35mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable short rail of any side of sofa set 4/5 seater and S&F new short rail made out of first class Hard Wood teak of size 525x100x35mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable wooden bearer of any side of sofa set 4/5 seater and supply and fix new wooden bearer made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable wooden Arm of any side of sofa set 4/5 seater and S&F new wooden Arm made out of first class Hard Wood teak of size 525x40x40mm duly french polished complete all as shown on drawings and complete all as specified and as directed by the Engineer-in-Charge. .

M&L for smoothening surface with sand paper of Sofa set five seater for repolishing the old polished surface or unpolished surface including bottom of sofa with one coat of french polish both above and below the sofacomplete all as specified and as directed by the Engineer-in-Charge.

M&L for smoothening surface with sand paper of Sofa set fourseater for repolishing the old polished surface or unpolished surface including bottom of sofa with one coat of French polish both above and below the sofa complete all as specified and directed.

REPAIR TO TABLE WRITING (FD- 33, 249 & 275)

Removal of unserviceable leg and S&F new leg made out of 1st class hard teak wood as per drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable knob/handle of drawer from front shutter of cabinet and S&F new aluminium anodised knob/ handle heavy duty of quality as per sample available as per drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable side of cabinet of table and S&F new side of cabinet including shutter and lock made out of 8 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable top and S&F new top of size 1145mm x 600mm made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade complete complete all as specified and as directed by the Engineer-in-Charge.

Removal of unserviceable drawer and S&F new drawer front and sides made out of 18 mm thick MDF Board exterior grade both side laminated , 6mm thick (BWR Gde)plywood at the bottom of drawer over one set of powder coated telescopic channels to move the drawers all as per drawing and complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of surfaces of Table writing (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIR TO TABLE DINING 6/8 PERSON (FD-273/FD-255/FD/MAP-II/03)

Removing the existing unserviceable/ broken top of Table dining 6 person and S&F new top of 1500x900mmx18 mm thick pre-laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ broken top of Table dining 8 person and S&F new top of 1800x900mmx18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ broken top long rail of Table dining 6 person and S&F new long rail made of 1st class hard wood teak of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/broken top short rail of Table dining 6 person and S&F new short rail made of 1st class hard wood teak of size as shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ broken leg of Table dining 6 person and S&F new leg made of 1st class hard wood teak all as specified shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of surfaces of Table Dining 6/8 persons (old and new surfaces) complete with sand paper and grinder machine (wherever required) and applying two or more coat of French polish on (old and new surfaces) to obtain glossy finish complete all as specified and directed by Engineer-in-charge

REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220)

Removing the existing unserviceable ply wood from GI charpoy and S&F 12mm thick plywood, BWP grade, conforming to IS :710 ISI marked alongwith two angle iron stiffeners 900x25x3mm with 10 Nos Nut Bolt complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE.

Removing the existing unserviceable / broken long rail 32mm dia and S&F New long rail for charpoy GI Pipe medium grade complete all as specified and as directed by the Engineer-in-Charge.

Preparing short rail from broken long rail obtained from Serial item No 6.02 above and fixing for charpoy GI pipe complete all as specified and shown on drawing including removing the existing broken/ unserviceable short rail complete all as specified and as directed by the Engineer-in-Charge.

Preparing leg of GI Charpoy made from old long/short rail obtained from Serial item No 6.03 above and welding 3mm thick base plate to the bottom of the leg and preparing MNF clamp holes as per existing complete all as specified and as directed by the Engineer-in-Charge.

S&F GI 3 way elbow 32mm bore, ISI marked, length not less than 65mm in each way including dismantling of old GI elbow complete all as specified and as directed by the Engineer-in-Charge. .

S&F GI check nut, 5mm thick suitable for 32mm GI pipe (ISI Marked) including dismantling of unserviceable check nut complete all as specified and as directed by the Engineer-in-Charge.

REPAIRS TO ALMIRAH STEEL LARGE/ MEDIUM (FD-67M, 1031)

Replacement of existing unserviceable handle by providing new Mild Steel chromium plated handle of standard size including nuts and washers of Almirah large/medium steel best quality as approved complete all as specified and as directed by the Engineer-in-Charge.

S&F New 75mm 6 lever lock with brass levers & stainless steel keys in duplicate fixed with suitable screws, welding as required for Almirah large/Medium steel including removing the existing unserviceable lock complete all as specified and as directed by the Engineer-in-Charge.

S&F New steel cleats for supporting shelves in Almirah large/ medium steel including removing the existing unserviceable cleats complete all as specified and as directed by the Engineer-in-Charge.

Removing unserviceable legs and S&F New leg of Almirah large steel made of 1.5mm/16 Gauge thick CRCA sheet bend to shape duly painted including one coat of red oxide primer and fix with Gas welding as shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 12.04 here-in-before above but leg of Almirah medium steel.

Removing unserviceable 3 way locking device from Alimarh large steel and fixing New locking device complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 12.06 here-in-before above but of Almirah medium steel.

M&L for welding of thickness not exceeding 6mm and length not exceeding 2.5cm for foot rest of almirah large steel by gas welding wherever required complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old painted surfaces of Almirah large steel internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush and applying putty on the patch and rubbing with sand paper No 150 to make surface even thereafter applying one coat of red oxide primer and applying a coats of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 12.09 here-in-before above but for Almirah medium steel.

CHARPOY HARD TOP (FD/MAP-II/01 )

Removing the old welding spots from broken welding joints and re-welding in the same place as required & denting and straightening of MS Pipes thereafter preparation of old surface by sand paper No 50 and wire brush and applying one coat of synthetic enamel paint in Black colour over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable /broken ply wood top and S&F New 12mm thick BWP plywood conforming to IS: 710 top ISI marked alongwith countersunk screws bolted on the stiffeners 10 in Nos all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge. Make : KITPLY/CENTURYARCHID PLY as approved by GE.

TABLE OFFICE OFFICER/ CLERK/ TYPIST STEEL (FD-84/1004/1003)

Removing the existing unserviceable/ broken top of steel table office offrs and S&F new table top of 1370 X 760 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ broken top of steel table office clerk and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003). The edges shall be covered with 2 mm thick edge bending tape of matching colour duly machine pressed. The colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mahogany/Wall nut chest shade complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable/ damaged drawers of table office offrs steel/ table clk steel and S&F New drawers made of 1 mm thick MS sheet bend to shape as including necessary welding shown on drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable lock and S&F New brass lock of 50mm 4 lever with duplicate keys complete all as specified and as directed by the Engineer-in-Charge. Make :- Harrison/Link/Godrej as approved by GE.

Preparation of old painted surfaces of tables internally and externally including shelves (Top & bottom) by No 50 sand paper and wire brush. Applying putty on the patch and rubbing with sand paper No 150 to make surface even applying one coat of synthetic enamel paint by spray painting of approved colour all as specified and shown on drawing and complete all as specified and as directed by the Engineer-in-Charge. .

S&F in repair 8mm plain glass 1370 X 760 mm of duly grinded and finished in all aspects acomplete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 8mm plain glass 1220 X 600 mm of duly grinded and finished in all aspects acomplete all as specified and as directed by the Engineer-in-Charge.

Supply only green baize cloth of size 1950x1200mm of not less than 250/-per RM on the table complete all as specified and as directed by the Engineer-in-Charge.

Supply only baize cloth of size 1500x900mm of not less than 250/-per RM on the table complete all as specified and as directed by the Engineer-in-Charge.

REPAIRS TO BED HARD TOP STEEL (FD/MAP/E6/08(R)

Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and applying one coat of synthetic enamel paint in Black colour oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable /broken ply wood top and supply and fixing New 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drawing and complete all as specified and as directed by the Engineer-in-Charge.

Removing the existing unserviceable shoe and S&F new PVC shoe in leg of Bed Hard as per existing pattern complete all as specified and as directed by the Engineer-in-Charge.

Removing existing Head Board of Bed hard steel and S&F new cushioned Head Rest of size 1150x900mm . The headboard shall be fixed with 12mm thick plywood and pasted with PU Foam 75mm thick 32 density duly covered with composite tapestry of leatherette and curved and bolted in the frame for resting and foam cushion complete all as specified and as directed by the Engineer-in-Charge.

M/s J B Construction Company (BID ID -3264136)