Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC 36 THE MALL FEROZEPUR CANTT 152001 | FEROZEPUR CANTT | FEROZEPUR | PUNJAB | 152001 | L1 | Accepted-AOC DUE TO LOWEST BID. | |
| 2 | L2₹18.6 L+₹1.9 L (11.3%)Rejected-Finance 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L2 | Rejected-Finance DUE TO HIGHER BID. | |
| 3 | L3₹18.6 L+₹1.9 L (11.6%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER BID. | |
| 4 | L4₹21.2 L+₹4.6 L (27.3%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID. |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
30 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTTGE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
CERTAIN BR REPAIRS AND PERIODICAL SERVICES TO AW AND OUTSTATION UNITS SUCH AS (BA BB AND BC) UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT
2023_MES_598211_1
802023/GE-29/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (WEST) FEROZEPUR CANTT
₹50,000
Yes
30 Sept 2023
3 Aug 2023
1 Sept 2023
3 Aug 2023
30 Aug 2023
17 Aug 2023
Amount
M&L preparation of old decorated surfaces of walls (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices, pilasters etc complete all as specified and directed.
All as per srl item No. 1 here-in-before but as on ceiling surfaces.
M&L preparation of old decorated surfaces of walls (plastered or un-plastered) including cornices, pilasters etc by brooming down and applying one coat of colour wash complete all as specified and directed.
M&L preparation of old wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and directed.
M&L preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L washing, rubbing down and stopping of painted surfaces and applying one coat of cement based paint on wall including proper curing complete all as specified and directed.
M&L washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper on wall surfaces including proper curing complete all as specified and directed.
M&L complete removal of existing treatment and preparing old/New decorated surfaces (Plastered or unplastered) by brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots etc. apply after finishing wall surface with wall care putty to get fair finish on that applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. Make (wall care putty) : Birla wall care putty /JK wall care putty
M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of camouflage paint on wall surfaces including proper curing complete all as specified and directed.
M&L complete removal of existing treatment on wall surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, paricles, apply after finishing wall surface with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm complete all as specified and directed. Note : Necessary form work/scaffolding are all included in the above quotated rate. Make (Paint) : Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Make (wall care putty) : Birla Wall care putty/JK White Putty
M&L for sand mat finish on wall surface including removal of old sand mat and cleaning the surface neatly complete all as specified and directed
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering/plastering on external surface of the wall of 15mm thick in cement mortar 1:4 on brick wall surfaces, surfaces finished even and fair complete all as specified and directed.
M&L 10mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 sqm each complete all as specified and directed.
All as per srl item No 19 here-in-before but exceeding 1.5sqm and not exceeding 4.00 sqm.
M&L cutting holes in brick wall exceeding half bricks but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and removing from site complete all as specified and directed.
S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item No 23 above here-in-before but size 125mmx60mm with double rebate.
S&F 35mm thick second class hard wood plain framed, panelled shutters (two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (Part I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.
S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
M&L preparing new surfaces of wood and wood based surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparing new steel surfaces of of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L PCC 1:2:4, type B-0 using (12.50mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.
S&F 300 mm mild steel helical door spring including roller and roller plate complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed complete all as specified and directed.
S&F 150mm extruded Aluminium alloy handle complete all as specified and directed.
S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed.
Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new pins/spring clips complete all as specified and directed.
S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/steel window not exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L forming jambs etc built in cement mortor 1:6 to openings including cutting toothing and properly bonding into old work also facing, jointoing and pointing to match to existing work complete all as specified and directed.
S&F factory made Solid PVC door frame of size 50mmx47mm made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent in approved makes
S&F PTMT tower bolts, 200mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
M&L for non-skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for non-skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18Sqm as in Skirting/Dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in cement mortar 1:4 complete all as specified and directed.
M&L of glazed coloured and cereamic tiles in vertical surfaces 200mmx 300mm/450mmx300mm and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying Skirtings/Dados and vertical surfaces complete all as specified and directed.
M&L for dark shade/ double charge/ ultracharge vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.
S&F powder coated of (any colour) Aluminium window, ventilator etc fixed/sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated Aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc complete all as specified or as per manufacturers instructions. Note: EPDM rubber beading/gasket measured and paid seperatley. Make (Aluminium frame) : Jindal /Hindalco or Equivalent in approved makes
S&F EPDM rubber beading around glass in Aluminium windows /ventilator shutters complete all as specified and directed.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed.
S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and directed.
Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.
M&L machine cut Kota stone slab flooring 20mm-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.
M&L Kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in cement mortar 1:4 and jointed as per ser item no 85 here-in-before.
M&L Granite (of any type) tiles 16mm-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar 1:6 complete all as specified and directed.
S&F 60mm thick, machine pressed precast interlocking paver block M-35 cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L 75mm thick, plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and directed.
Demolition of un-reinforced cement concrete in any position complete all as specified and directed.
M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
S&F as in replacement of plastic water closet seat cover coloured pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings including dismantling existing water storage tank, complete all as specified and directed.
All as per ser item No. 67 here-in-before but 500 litre capacity tank.
S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
S&F stop cock cast copper alloy screwed down, high pressure with fancy type chromium plated screwed both ends for iron pipe or union of 15 mm bore fixed in repairs complete all as specified and directed.
S&F bib tap of cast copper alloy brass 15mm bore, with fancy type, screwed down both ends screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.
S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe as in repair complete all as specified and directed.
S&F pressure JET for EWC including PVC connection and chromium plated fitting as fixed in repair complete all as specified and directed.
S&F health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube(PVC /stainless steel coated) and wall hook as in repair complete all as specified and directed.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed.
S&F 125mm dia chromium plated grating doom fixed over trap with cement in repair complete all as specified and directed
S&F 600mm long chromium plated towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.
S&F PVC waste pipe with waste fittings, 32 mm bore size for sinks, WHB etc with long screwed shanks and fly nuts as in repair complete all as specified and directed.
S&F steel sink with dranage board made out of 1mm thick stainless steel sheet in kitchen or laboratory with plug washers and waste fittings including bedding in cement mortar on dwarf wall , including fixing cantilever brackets and connecting unions to pipe overall size of sink 915mmx460mm and bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.
S&F Wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed and making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F Vitreous china (White) half stall urinal with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, with brackets, flush pipe, union for discharge pipe as in repair complete all as specified and directed.
S&F Vitreous China bowl urinal flat back, size of 465mmx355mmx265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.
Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
S&F mild steel Fe 410 -W (Gde E-250 quality 'B' Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
Dismantling plain or corrugated steel sheet/fibre sheet on roof covering complete all as specified and directed.
S&F pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified and directed.
M&L 6mm thick asbestos cement one-piece plain angular ridge in roofs, walls etc fixed with ‘L’ type or 'J' type or crancked hooks complete all as specified and directed.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as specified in MES schedule part-I & II complete all as specified and directed.
S&F Gypsum Board 6mm to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (angle 25mmX25mm, main tee 38mmX23mm, sub tee 23mmX23mm) including Aluminium anodised/powder coated snap grid frame 605mmX605mm for false ceiling including hanging arrangement as in repair complete all as specified and directed. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.
S&F galvanised steel water tubes 15mm bore medium grade, with all fittings and fixed to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
S&F galvanised steel water tubes 20mm bore medium grade, with all fittings and fixed to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
Taking up or down 15 mm existing steel tubing and re-fixing old steel tubing and connections in new or old position to walls and ceiling or laid in floors including cleaning the steel tubing complete all as specified and directed.
All as per item No. 96 here in before but steel tubing of 20mm dia.
Dismantling of boarding of any description and in any position complete all as specified and directed.
S&F 16mm-18 mm solid PVC board plain colour, fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed.
S&F continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.
S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed.
S&F PVC connection 15mm x 450mm size with PTMT nuts in repair complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.
S&F PVC (SWR) pipes single socketed 110mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent complete all as specified and directed.
S&F PVC (SWR) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm bore with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.
S&F 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed.
S&F 150mm floor door stopper of Aluminium alloy and tonged with hard drawn steel spring fancy type in repair complete all as specified and directed.
S&F mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.
M&L taking down existing stop valve/angle cock 15 mm bore by replacing washer/spindle etc. and refixing the same complete all as specified and directed.
Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound.
M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.
M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate ) as in filling under sunken portion complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finished even and rough to receive top layer complete all as specified and directed.
S&F spindle for 15mm dia for chromium plated brass fancy bib cock as fixed in repair complete all as specified and directed.
S&F spindle for 15mm dia for chromium plated fancy brass pillar cock as fixed in repair complete all as specified and directed.
M&L 32mm bore waste coupling brass chromium plated for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and other and fixed complete all as specified and directed.
M&L 40 mm bore waste coupling brass chromium plated for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and other and fixed complete all as specified and directed.
Easing of wooden window shutters/CB Shutters (One Unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
Easing of wooden door shutters (One Unit shall comprise of one Panelled or Skeleton door shutter irrespective fo number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
M&L welding exceeding 6mm but not exceeding 9 cm in length, thickness of metal to be welded in repair complete all as specified and directed.
S&F chromium plated handle for Bib tap as fixed in repair complete all as specified and directed.
M/S Manmohan Singh Contractor
M/S N Maini Constrution
VK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .