WBTET/DTET/KLM/NIT-1/2021

C.E. LAB. ITEMS

Air Permeability Apparatus (Blaine type):

Sieve: of Brass Frame - 20cm dia x 90 micron [BIS:460 Part I & II 1985, reaffirmed 2008]

Vicat Apparatus with ISI Certification Mark IS:5513:1976 or latest fitted in Aluminium Box (IS-1727, 2541 (P.1), 2645, 4031)

Vibrating Machine IS:10080-1982

Motorized Compression Testing Machine, capacity 2000KN, Digital [CONFORM IS – 14858 ( 2000) ]WITH NCCBM CERTIFIED LOAD GAUGE. WITH NABL/NCCBM CERTIFICATE

Le-Chatelier Mould with ISI Certification Mark IS:5514 reaffirmed 2011:

Le-Chatelier water Bath:

Autoclave, with analogue pressure gauge & temp controller as per IS: 4031 (Part 3).

Graduated measuring cylinder: of transparent material (glass – make Borosil)

Sieve Shaker, Motorised

Pycnometer with necessary attachment as per relevant IS code

Aggregate Impact Test Apparatus with Counter

Los Angeles Abrasion testing machine: (IS: 10070-1982) [test procedure as in 2386 part IV reaffirmed in 2011] (with Counter)

Density Basket IS : 2386 (Part III) – 196

Electronic Digital Balance(25KG/1G)

Electronic Digital Balance(20KG/1G)

Bouyancy balance

Standard pycnometer of capacity one litre and weighing balance of capacity 2 kg or more and accurate to 0.5 g

Slump Test Apparatus IS: 7320-1974

Compaction Factor Apparatus IS: 5515-1983

Vee-Bee Consistometer IS : 10510-1983

Flow table (as per IS: 5512):

Digital Rebound Hammer with Calibration ANVIL

ULTRASONIC PULSE VELOCITY APPARATUS:

Ring and Ball Apparatus IS: 1205, IP:58/63

Pensky Martens Flash Point (Closed) Tester (Electrically Operated) IS: 1448 (Part 1) 1209, IP 34/58,

Cloveland flash (open) and fire point apparatus [electrically heated] IS: 1448 P:69 IP 36/63

Ductility Testing Machine IS: 1208 -1978

Viscometer (Electrically Heated) As per IS 1206 part-II ASTM D-88, E-102

Marshall Apparatus (Electrically Operated) ASTM D-1559 Supplied complete with proving ring (30 kN capacity) & dial gauge (least count 0.002 mm, provided with calibration certificate as per IS: 4169).

Digital Mastic Asphalt Hardness Tester, 0.01 Mm

Universal Testing Machine Capacity, 1000 kN

Tile flexural strength testing machine (Ref Standard IS: 654,1237 - 1980).

TOTAL STATION

Tile Abrasion Testing Machine (Ref Standard IS:1237- 1980,1706- 1972)

Equipment for study of venturimeter

Rapid Moisture Meter Conforming to IS: 12175

HOT AIR OVEN

FLASH AND FIRE POINT APPARATUS

SAND REPLACEMENT APPARATUS [SMALL]

Plastic Limit Apparatus Conforming to IS: 2720 (Part V)

Shrinkage Limit Apparatus (supplied with requisite quantity of Mercury) With The apparatus conforms to IS: 10077, and the test is performed as per IS: 2720(Part VI).

I.S. SIEVES [for aggregate (Coarse and Fine) & Soil]

Hydrometer [as per IS:2720 (Part- IV)]

CUT SECTION MODEL OF REACTION TURBINE

Direct Shear Apparatus, 12 speed, Motorised IS: 2720 (Part XIII) IS: 11229

Laboratory Vane Shear Apparatus (Motorized)

PRISMATIC COMPASS

Proctor Compaction Test (Standard) BIS: 2720-part 7 1974 Standard:

Triaxial Test Apparatus BIS: 2720 – part 11(1971), part 12 (1981), part 35(1974),

Triaxial cell

circular Ranging Rod

SPECTROPHOTOMETER

TURBIDIMETER

FLOCCULATOR (JAR TEST APPARATUS

Universal Extractor Frame ( manually operated)

Non corrodible air tight moisture can, made of aluminium, number engraved at lid and container body

Liquid Limit Device, Motorised

Cube Moulds Mould, M. Steel, for 70.6mm cube As per IS: 10080- 1982

Cube Mould (150mm) With I.S.I Mark As per IS:10086-1982

Desiccator complete with Desiccator Plate (Glass) 300 mm dia

EXPERIMENTAL SETUP FOR MEASUREMENT OF SPEED OF A SHAFT BY STROBOSCOPE,

APPARATUS FOR DETERMINING RADIUS OF ROTATION OF A PORTER GOVERNOR AT DIFFERENT SPEED OF AN ENGINE

Portable Conductivity/Resistivity/Salinity/TDS meter T

Portable pH meter

Automatic Soil Compaction Machine as per I.S. : 2720 (Part VII & VIII)

Length Gauge Conforms to IS:2386 (Part-I)

Thickness gauge conforms to IS 2386 (part I)

Survey umbrella

Standard Vernier Theodolite with Erect Image, optical plummet alongwith Aluminium stand

Electrical Table Saw Small

200 Amp IGBT Arc Welding Machine DC Inverter

Classic Arc 300 Two Phase and Three Phase Amps MOSFET Welding

E.T.C.E. LAB. ITEMS

30 MHz Dual Channel CRO.

Function Generator

Digital Multimeter

50 MHz Dual Trace CRO

Variable DC Power Supply Dual Supply , 0V to 30V ,2A ; ±3 to ±15v ,1A; 5v, 5A fixed,Digital Display.

Diode Characteristics Trainer Kit

BJT Characteristic Trainer kit

CLASS -B PUSH-PULL AMPLIFIER TRAINER

To study the FET characteristics Trainer

RC coupled amplifier circuit Trainer

MOSFET characteristics Trainer kit

Power Electronics Trainer Kit { to study various components - UJT, DIAC, TRIAC, POWER MOSFET, POWED DIODE and POWER BJT)

POWER FACTOR METER (SINGLE PHASE)

CRYSTAL OSCILLATOR STUDY

Tuned Amplifier Trainer

COMPLETE SETUP TO DESIGN / CONSTRUCT PROGRAMMABLE UP/DOWN COUNTER.

OP Amp Trainer kit (IC 741 based)

MULTIVIBRATOR using IC555 timer Trainer

Multi o/p programmable linear dc power supply 32 V/3 A,-32V /-3 A,3.3V/5A fixed,

DIGITAL LOGIC TRAINER KIT (To verify the truth table of NOT, OR, AND, NAND, NOR, XOR, X-NOR with TTL logic gates and CMOS logic gates).

Complete setup to implement encoder, decoder ,multiplexer and de- multiplexer.

EXPERIMENTAL SETUP TO DESIGN OF UNIVERSAL SHIFT REGISTER

Complete setup to design / construct parity generator, checker and comparator.

ADC and DAC Trainer Kit

Digital Flip flop trainer kit

binary synchronous and asynchronous counter Trainer

Network and Bridges Trainer kit

Digital I.C Tester

Series and parallel resonant circuit Trainer

A KIT OF BASIC ELECTRICITY & ELECTRONICS COMPONENTS

Passive Filter Trainer

T and Pi network trainer kit

TRAINING KIT TO STUDY OF LINEAR SERIES AND SHUNT REGULATOR

single-phase transformer by performing (i) O.C. test (ii) S.C. test.

Study of three point and four point starter

8085 Microprocessor Traineer Kit

Microprocessor 8086 Trainer Kit

To study the amplitude modulation and demodulation Ttrainer kit

AM/FM Radio Receiver kit

Analog signal Sampling & Reconstruction Trainer Kit

DSB/SSB AM Transmitter / Receiver Trainer.

Frequency Modulation and Demodulation Trainer kit

Delta / Sigma Delta and Adaptive Delta Modulation Demodulation Kit

DPCM & ADPCM MODULATION / DEMODULATION KIT DPCM & ADPCM MODULATION / DEMODULATION KIT

EPBAX Trainer kit

Digital Communication trainer

DTH TV and SET TOP BOX TRAINER KIT

Colour TV Trainer with provision of fault finding

TDM and PCM Modulation /Demodulation Trainer kit

Digital storage oscilloscope

Microwave Test Bench (KLYSTRON Based)

ASK / PSK / FSK Modulation And Demodulation Kit

SATELLITE COMMUNICATION TRAINER

1.5 GHz spectrum Analyser

Antenna Trainer Kit

TRAINING KIT TO STUDY CHOPPER USING SCR

SPEED CONTROL OF INDUCTION MOTOR (FREQUENCY CHANGING WITH REQUIRED PANEL & DRIVE).

To study drive circuit of SCR

FREQUENCY COUNTER

To study SMPS with PWM regulator chip

AC SERVO VOLTAGE STABILIZER AS SERVO MECHANISM

Jones chopper Trainer

DIFFERENT STARTERS FOR INDUCTION MOTOR

To study the speed control of DC motor

STEPPER MOTOR STUDY SET

Single Phase Bridge Inverter

PC Based PLC Trainer

1 KVA ONLINE UPS Trainer kit

ANALOG LAB TRAINER KIT

PC Based Optical Fiber Communication Kit

PAM PPM PWM MODULATION AND DEMODULATION TRAINER

LCR Q-meter

3GHz Digital spectrum analyzer.

Microcontroller (8051) Trainer Kit

LAN Trainer with PROTOCOL SIMULATION AND ANALYSIS SOFTWARE

PID controller Trainer Kit (Microprocessor based)

GSM mobile telephone trainer

Bread Board

Sholdering and Desholdering kit

Strain Gauge Trainer

MEASUREMENT OF TEMPERATURE USING THERMOCOUPLE, RTD, THERMISTOR, AD950

To measure displacement with LVDT

COLLPITTS OSCILLATOR & HARTLEY OSCILLATOR TRAINER KIT

TRAINING KIT TO STUDY OF RC PHASE SHIFT OSCILLATOR

EXPERIMANTAL KIT FO WIEN BRIDGE OSCILLATOR

M.E. LAB. ITEMS

Center Gauge

Combination Square Set

Dial Indicators, (Metric Standard)

Dial Bore Gauge with Dial Indicator

Feeler Gauge

Gear Tooth Vernier Caliper

Inside Micrometer

Outside Micrometer

Precision Spirit Level

Radius Gauge

Ring Gauge:

Screw Pitch Gauge:

Sine Bar (IS : 5359 - 1987 ) :

Slip Gauge Set (Metric Set)

Dial Snap Gage:

Surface Plate: Granite Top surface plates with safety frame and with caster

Universal Bevel Protractor with magnifier lens

Vernier Caliper (Metric / Inch Scale)

Vernier Height Gauge (Metric / Inch Scale)

Actual cut section working model of Water Tube BABCOCCK AND WILLCOX Boiler

Cam Analysis Apparatus

Actual cut section working model 4 Speed Sliding Mesh Gear Box

Actual cut section working model of constant mesh gear box

Actual cut section working model of Rear Axle Assembly of a 4 Wheeler Vehicle

Static and dynamic balancing of Rotating Masses Apparatus

Universal Governor Apparatus

Model of Watt Governor and Porter Governor

Single shoe brake – working model

Band brake – working model

Single Plate clutch – working model

Model of Cone Clutch

Model of Centrifugal Clutch

Flywheel model

MultiPlate clutch – working model

Actual Cut Section Model of Torque Converter

Bomb Calorimeter with Complete Outfit,

Cut Section Model of Fire Tube Cochran Boiler

Cut Section Model of Lancashire Boiler,

Cut Section Model of Water Tube Babcock and Wilcox Boiler

Horizontal & Inclined Plane Friction Slide Apparatus

Separating & Throttling Steam Calorimeter with Boiler

Thermal Solar Water Heating System

Stefan-Boltzmann‟s Apparatus,

Cut Out Model of Lobe Type Compressor

Actual Cut Section Model of Air Brake System

Double Purchase Crab Winch

Worm & Worm Wheel

Rockwell Hardness Testing Machine

Rockwell Hardness cone

Ball Indentors for Rockwell testing m/c

Brinell Hardness Testing Machine

Charpy & Izod Impact Testing Machine (Mechanical type), Test Piece:- 1. Rockwell, 2. Brinell 3. Izod 4. Charpy 5. Tensile, 6. Torsion

Batra Trading Company

M/S. P. C. SOLUTION

Lawrence and Mayo (India) Pvt. Ltd.

EIE Instruments Pvt. Ltd.

ADVANCE INSTRUMENTS

DELTA TECHNOLOGIES

Lawrence and Mayo (India) Pvt. Ltd.

M/S. P. C. SOLUTION

EIE Instruments Pvt. Ltd.

DELTA TECHNOLOGIES

Akademika Lab Solutions

ADVANCE INSTRUMENTS