Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.4 L
Closing Date
5 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 2 needing a document upload
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.22.Financial Eligibility Criteria: (As Per IRGCC Clause 10.2)10.2.Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where:V= Advertised value of the tender in Crores of Rupees.N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI.PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.2 TO EVALUATE THE FINANCIAL ELIGIBILITY CRITERIANon submission of Annexure-VIB, along with copies of Audited Balance Sheets dulycertified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet by the tenderer shall result in summarily rejection of his / their bid" ( Click here to download Format)
IRGCC 2022 TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 1.Technical Eligibility Criteria: (As Per IRGCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. PLEASE READ ALL IRGCC TENDER FORM SECOND SHEET & ACS 1 CLAUSE 10.1 TO EVALAUTE THE TECHNICAL ELIGIBILITY CRITERIA
Defination of Similar Work :- Any Work of PI / RRI /ABS /IBH work /LC gate interlocking which includes indoor andoutdoor signalling work.
27 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The definition and calculation of local content shall be inaccordance with the Make in India policy as incorporated in thetender conditions. Please refer to Make in India Policy attachedherewith for detailed information.
Complete tender document including NIT details, schedule, conditions is attached herewith. Tenderers are requested to read the tender document thoroughly before quoting their rates.
Tender will be governed as per latest standard Indian Railways General Conditions of Contract, works 2022 and their all correction slips. Tenderer are requested to read the latest IR GCC works 2022 and their all correction slips before submission of their offer and must be submit the all Annexures, documentary evidences, data as mentioned in IRGCC Works 2022 and their all correction slips.
All the documents in support of the Minimum Eligibility Criteria including Letter of Acceptance/Work Order, Documents showing the nature and total value of work, Completion report, Audited balance sheet, Attested certificate from Government employer, Copy of I.T. return etc. should be submitted along with the bid. Railway reserves the right to make or not to make any further reference to the tenderer regarding the fulfillment of the Minimum Eligibility Criteria and to award the tender only on the basis of the documents submitted by the tenderer along with the bid. The tenderer will not have any claim on this account.
Rights of the Railway to deal with Tender: The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender, and tenderer(s) shall neither demand any explanation for the cause of rejection of his/ their tender nor the Railway to assign reasons for declining to consider or reject any particular tender or tenders. If the tenderer(s) deliberately gives / give wrong information in his / their tender or creates / create circumstances for the acceptance of his / their tender, the Railway reserves the right to reject such tender at any stage.
If the bidder submits Bid security in the form of Bank Guarantee "The original Bank Guarantee should be delivered in person receive and dispatch section of this office (i.e. DRM office, Signal & Telecom, Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
1.As per Railway Boards letter no. 94/CE-I/4 Pt.17 dated: 13.08.2012, for all work contract valuing more than Rs.10 Crore, "two Packet System" of tendering mandatorily be followed. 2.As per Railway Boards letter no. 2002/CE-I/CT/37 JV Pt.VIII dated: 14.12.2012, "JOINT VENTURE FIRMS" shall now be applicable to the works tenders of value More than Rs. 10 Crores. 3.This is highly technical work to be executed only by qualifying MEC stipulated in tender document as per IR GCC 2022 with similar work issued vide CSTE office letter no. WCR/N- HQ/150/Wks/Policy/14 dated: 03.08.2018. No any relaxation in MEC will be given for any consideration. Firm failing to satisfy the MEC will be treated as ineligible firm. (IF MEC APPLICABLE) 4.In terms of railway board's letter no. 2020/CE- I/CT/3E/GCC/Policy dated: 30.12.2020, If the bidder is banned for submission of bids on the date of closing of tender, such bid, even if received, shall be treated as invalid while evaluating the bids. 5.Change of inspection authority may be done by engineer- incharge at a later date. 6.In case of more than one valid & eligible L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and current financial years up to the date of the opening of the tender, may be selected for the award. Instructions with respect to bid capacity will follow. Supporting document for this may be clearly uploaded by tenderer with their offer. 7.The provisions contained in railways circulars, JPO's regarding penalties will be applicable for works requiring digging. 8.As per railway boards letter no. 2017/CE- I/CT/9 dated: 31.05.2023 "for all contracts costing more than Rs.5 crore, Contractor's e-MB is mandatory and contractor's e- MB should be part of Tender Document. All other provisions of railway boards letter no. 2017/CE-I/CT/9 dated: 31.05.2023 will be followed. (If applicable)
West Central Railway Joint procedure order for undertaking earth work in the vicinity of electrical, signalling, telecom cables issued vide no. WCR/N-HQ/110/JPO Corrsp/Sig.-99 dated: 08.01.2024 instructed vide GM (S&T) JBP letter no. JBP/N.H.Q.120/Policy/T-1/Part-V dated: 10.01.2024 and procedure for undertaking digging work in the vicinity of signalling, electrical and telecommunication cables issued by railway board vid eno.2021/Tele/5(2)/3-Part(1)(3425647) dated 12.06.2023 or any other latest JPO by railways will be applicable in this contract
It is responsibility of the contractor during execution the work near the track, that all safety precautions will be taken like; Safety Jacket, wearing of Safety Shoes and Helmet to avoid any type of causality.
SPECIAL CONDITIONS AND SCOPE OF WORK OF THIS WORK WILLBE AS PER CONDITIONS MENTIONED IN TENDER DOCUMENT ATTACHED HEREWITH
RATES: The rates (if accepted) quoted by the bidder will be inclusive of all taxes & duties, GST livable by state/central government/local government. Compliance of GST Act/Rule and any Correction /Modification issued by Railway Board/Government in Regard to GST act shall be binding to the contractor.
COMPLIANCE OF LABOUR LAWS & REGISTRATION: Contractor should comply with the latest applicable labour laws. You will be advised to contact Regional Labor Commissioner, Jabalpur for necessary action. Contractor is to abide by the provisions of Payment of Wages ACT & Minimum Wages ACT and all other Labour provisions as per IRGCC Works and all its Advance correction slips
SHRAMIK KALYAN. : You will be advised to register yourself on Railway Board website www.shramikkalyan.indianrailways.gov.in & upload the required information regarding the awarded tenders to bidders by this office.
ENGINEER INCHARGE: Sr. Divisional Signal & Telecom Engineer/Co. /JBP will be the Engineer in-charge of the work
FINANCE OFFICER: Sr. Divisional Finance Manager / Jabalpur will be the Associate Finance Officer
CONSIGNEE: Consignee depot as mentioned in tender documents attached herewith or as nominated by Engineer In- charge will be Consignee depot for supply materials. Sectional SSE In-charge of the respective station or as nominated by engineer in charge will be site supervisor for the execution of the work. Measurement of execution of work will be certified by sectional SSE/SIG duly endorsed by respective ADSTE's and measurement will be recorded in MB by Consignee depot as mentioned in tender documents attached herewith. Sectional ADSTE will be Field Engineer for the execution work of respective section.
TEST CHECK: 20% check shall be certified by the officer as mentioned in tender documents in Measurement Book.
SUBSTITUTE: The Engineer-in-charge of the work may substitute these officers/supervisors at a later date as per Railway requirement.
If any document/information submitted by you found false/incorrect/forged in any manner then action will be taken as per codal provisions of railways.
IRGCC works 2022, Part-I, clause 7 i.e. 7. "Right of Railway to Deal with Tenders: The Railway reserves the right of not to invite tenders for any of Railway work or works or to invite open or limited tenders and when tenders are called to accept a tender in whole or in part or reject any tender or all tenders without assigning reasons for any such action. In case if tender is accepted in part by Railway administration, Letter of Acceptance shall be issued as counter offer to the Tenderer, which shall be subject to acceptance by the Tenderer. However, performance guarantee, security deposit and other financial transactions in the tender will be as per total contract value evaluated by e- tender module of IREPS and no any relaxation on performance guarantee, security deposit and other financial transactions will be given on account of banning of any/some items for procurement in this tender.
S&T Work in connection with Interlocking of Non-interlocked LC gates (05 Nos) having TVU more than 10000 on Jabalpur Division of West Central Railway
JBP-N-SIG-TENDER-2026-35~WCR
JBP-N-SIG-TENDER-2026-35
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹5.4 L
9 Sept 2026
9 Sept 2026
21 Sept 2026
260 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,20,33,742.64 | ||
| — | 8.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos IRS S 30 & RDSO Drg. Nos. SA 3376/M & 3377/M respectively with latest Amendment) on both the doors, duly painted with red oxide. Single case as per Drg Nos WCR/DY.CSTE(Con)/KOTA/3 with latest alteration. INSPECTION BY CONSIGNEE | — | — | — | 1,03,079.68 | |
| — | 8.00 | — | — | ||
| Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 41 (E type lock & key as per spec. Nos IRS S 30 & RDSO Drg.Nos. SA 3376/M & 3377/M respectively with latest Amendment) on both the doors, duly painted with red oxide. Half case as per Drg Nos WCR/DY.CSTE(Con)/KOTA/3 with latest alteration. INSPECTION BY CONSIGNEE | — | — | — | 94,170.72 | |
| — | 30.00 | — | — | ||
| Supply of Desk type Electronic Magneto Telephone as per spec No IRS TC79/2000 or with latest Amendments. INSPECTION BY CONSIGNEE | — | — | — | 92,269.5 | |
| — | 5.00 | — | — | ||
| Supply Installation, testing and commissioning of Class-A Protection type Surge Protection system Consisting of: - a) Latest guidelines issued by the RDSO/ Railway Board shall be followed for Class A protection. As per NBC 2016, radioactive terminals, such as dissipation systems, ESE, or CSE air terminals, are not permitted. b) The down conductor shall consist of a 50 sq mm copper-bonded steel conductor, securely connected to the air terminal and the earth pit. c) Preferably, Isolated Spark Gap (ISG) of rating 100 KA shall be used to interconnect lightning arrestor earth pit to signal ring earth d) Lightening counter testable of 6 digits non resettable type of stainless steel of material having IP 65 protection manufacturer of 6 digit non resettable type of stainless steel material having IP 65 Protection." Note: OEM certificationas per RDSO TAN to be submitted after commissioning. SUPPLY PORTIONINSPECTION BY RITES/TPI. | — | — | — | 6,21,224.95 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing and commissioning of UL/FM/VDS/LPCB approved Microprocessor based networkable analogue addressable and modular type of Fire alarm control panel with display, in built charging facilities and provision of GSM module suitable to send SMS to configured mobile no. The panel should be equipped with nos. of loops and provision of expandability as per RDSO specification no RDSO/SPN/217/2025 Ver 3.1 or latest (suitable for distributed as well as centralized). The Control panel shall be the central processing unit of the system, receiving and analysing signals from probe type bimetallic heat detectors, UV&IR flame detectors, heat and smoke multi sensors, LHS/LHSD interface and manual call points, providing audible and visual information to the user. The panel shall have provision of connectivity of TCP- IP suitable for programming and remote monitoring. The panel shall have dedicated Rs 232 serial port for direct PC or MODEM connection, for interfacing with existing data logger, optional remote printer. ( As per RDSO Specification no. no. RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 6,41,352.3 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing and commissioning of analogue addressable, resettable smoke sensor with LED indication . ( As per RDSO Specification no. RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 86,186.4 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing and commissioning of resettable, addressable multi sensor ( Heat & Smoke) which is fully compatible with analogue addressable protocol, Electronically addressed. ( As per RDSO Specification no RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 95,425.5 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing and commissioning of addressable, resettable manual call point with integral short circuit isolator, having status LED for alarming & Stand by mode, Electronically addressed. ( As per RDSO Specification no RDSO/SPN/217/2025 Ver 3.1 or latest or latest) INSPECTION BY RDSO | — | — | — | 28,218.5 | |
| — | 300.00 | — | — | ||
| Supply, installation, testing and commissioning of analogue type linear heat sensing cable. ( As per RDSO Specification no RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 70,143 | |
| — | 5.00 | — | — | ||
| Supply, installation and testing and commissioning of module of LHS cable to be integraced on fire alarm panel. ( As per RDSO Specification no.no RDSO/SPN/217/2025 Ver 3.1 or latest INSPECTION BY RDSO | — | — | — | 4,19,595.75 | |
| — | 5.00 | — | — | ||
| Supply, installation and testing and commissioning of addressable Loop powered wall sounder/alarm. ( As per RDSO Specification no. no RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 48,742.25 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing and commissioning of FRLS/Fire survival circuit integrity cables i.e armored cable & Power cable with all accessories for connection of all fire alarm devices. ( As per RDSO Specification no. no RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 1,28,257.8 | |
| — | 5.00 | — | — | ||
| Supply, installation and testing and commissioning of Aspiration Type smoke Detection System complete. ( As per RDSO Specification no.no RDSO/SPN/217/2025 Ver 3.1 or latest) INSPECTION BY RDSO | — | — | — | 7,33,475.45 | |
| — | 300.00 | — | — | ||
| Supply, Testing & Commissioning of CPVC pipe having 25 mm dia for aspiration detection supply portion (Number = 03 Meter length) INSPECTION BY CONSIGNEE | — | — | — | 2,11,746 | |
| — | 300.00 | — | — | ||
| Supply of PVC conduit Pipe having Diameter 25mm. Supply portion INSPECTED BY CONSIGNEE. | — | — | — | 3,102 | |
| — | 20.00 | — | — | ||
| Supply of fire extinguisher 4.5 Kgs, Co2 gas ISI make with test certificate make, Minimax/VINTAX or similar. INSPECTED BYCONSIGNEE | — | — | — | 1,39,555.2 | |
| — | 200.00 | — | — | ||
| Supply of Resettable fuse 02-12/02A, 24-32V/2A, 24-32V/6A, 60-66V/2A, 60-66V/4A, type Polymeric Positive Temperature Coefficient(PPTC)fuse of make Little fuse/Fuzetec/Tyco/Bourn/ Raychem, suitable fuses with trip current shall be supplied as per requirement. INSPECTION BY RDSO | — | — | — | 2,600 | |
| — | 320.00 | — | — | ||
| Supply & Installation, testing and commissioning of fuse alarm system of Fuse Auto- changeover system (FACS) for vital fuses as per RDSO specification No. RDSO/SPN/209 /2012 Rev.2.0 or latest. Spares to be supplied as perthe RDSO specification. PERUNIT = PER FUSE INSPECTION BY RDSO | — | — | — | 2,54,592 | |
| — | 60.00 | — | — | ||
| Supply of earth electrode assembly as per WCR drawing. INSPECTION BY CONSIGNEE | — | — | — | 83,333.4 | |
| — | 20.00 | — | — | ||
| Supply of insulation MAT for Electricalpurpose 2.5 mm thick size 2mx1msuitable for 3.3 KV to 11 KV (Class B)confirming to IS-15652-2006.INSPECTION BY CONSIGNEE. | — | — | — | 29,733 | |
| — | 3.00 | — | — | ||
| Supply of flexible cable single core multistrand copper conductors, 1x6 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO | — | — | — | 2,58,978.87 | |
| — | 2.00 | — | — | ||
| Supply of Jumper wire 1X1mm dia as per RDSO spec, IRS:S-76/89 with latest amendments of various colours. INSPECTION BY RDSO | — | — | — | 16,627.04 | |
| — | 2.00 | — | — | ||
| Supply of flexible cable single core multistrand copper conductors, 1x2.5 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO | — | — | — | 49,955.06 | |
| — | 7.00 | — | — | ||
| Supply of PVC insulated railway signalling indoor single core [ tinned jumper wire] 1X 0.6 mm dia as per RDSO spec. Nos. IRS:S-76/89 with latest amendments of various colours. INSPECTION BY RDSO | — | — | — | 32,169.62 | |
| — | 7.00 | — | — | ||
| Supply of PVC insulated flexible wire 16/0.2 mm dia as per RDSO spec. No. IRS:S- 76/89 with latest amendments of various colours. (Red, black & grey) INSPECTION BY RDSO | — | — | — | 43,137.43 | |
| — | 1.00 | — | — | ||
| Supply o f flexible cable single core multistrand copper conductors, 1x10 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO | — | — | — | 1,38,836.15 | |
| — | 1.00 | — | — | ||
| Supply o f flexible cable single core multistrand copper conductors, 1x25 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO | — | — | — | 3,51,715.57 | |
| — | 1.00 | — | — | ||
| Supply o f flexible cable single core multistrand copper conductors, 1x16 sq.mm confirming to RDSO specification IRS:S: 76/89 with latest amendments. INSPECTION BY RDSO | — | — | — | 2,05,322.58 | |
| — | 40.00 | — | — | ||
| Supply of Phenolic Laminated sheet, resin bonded 10mm thick, grade P3 in standard size of 1.22X1.22 Mtr as per spec. Nos IS 2036 of 1974. INSPECTION BY CONSIGNEE | — | — | — | 1,54,988 | |
| — | 30.00 | — | — | ||
| Supply, fixing and wiring of lamp holders, switches, two pin (Backellite type) and bulbs (230V/110V) with contractor own material for location boxes (Anchor make or ISI mark) INSPECTION BY CONSIGNEE | — | — | — | 2,832.3 | |
| — | 1000.00 | — | — | ||
| Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/ SPN/ 189/ 2004 verision 3.0 with latest amendment. INSPECTION BY CONSIGNEE | — | — | — | 79,230 | |
| — | 100.00 | — | — | ||
| Supply of end plate suitable for disconnect terminal. INSPECTION BY CONSIGNEE | — | — | — | 1,183 | |
| — | 20.00 | — | — | ||
| Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. INSPECTION BY CONSIGNEE | — | — | — | 2,808 | |
| — | 200.00 | — | — | ||
| Supply of end stop suitable for disconnect terminal block INSPECTION BY CONSIGNEE | — | — | — | 2,070 | |
| — | 5.00 | — | — | ||
| Supply of Pre-wired Crank Handle cum key lock relay box along with LEDs, TEKNIC/SIEMENS make push buttons, wago terminal, string rod, etc. as per Drawing Nos.RST.C.111A. INSPECTION BY CONSIGNEE | — | — | — | 55,467.05 | |
| — | 300.00 | — | — | ||
| Supply of GI pipe as per Specn. No. IS 1239 (Part-1)/1990medium class normal bore of100 mm, nominal mass of Tube12.5 Kg (+/-) 10% per meter and complying parameters of specification. INSPECTION BY CONSIGNEE | — | — | — | 3,41,856 | |
| — | 300.00 | — | — | ||
| Supply of Double Walled Corrugated pipe fire resistant and anti- rodent made u p of Polyethylene of Size 103.5 mm inner dia and 120mm outer dia in 6M straight length as per RDSO specification Nos. RDSO/SPN/204/ 2011 with latest amendment along with one coupler per every 6 meters. INSPECTION BY CONSIGNEE | — | — | — | 86,925 | |
| — | 20.00 | — | — | ||
| Supply of Signal Nos. plates. as per Drg enclosed. INSPECTION BY CONSIGNEE | — | — | — | 11,495.6 | |
| — | 20.00 | — | — | ||
| Supply of A/AG/C/P/G board as per RDSO Drg. Nos. SA 23455-56 RST- 52 11445 & SA 23476-77 as applicable INSPECTION BY CONSIGNEE | — | — | — | 15,376 | |
| — | 20.00 | — | — | ||
| Supply of Hand Cuff Locks / Godrej Navtal lock with common key. INSPECTION BY CONSIGNEE | — | — | — | 7,443.4 | |
| — | 10.00 | — | — | ||
| Supply of Time Element Relay (Clock work type) AG timer Siemens Make No. (RSSK30/0052) or equivalent with timer range up to 120 seconds. INSPECTION BY RDSO | — | — | — | 93,861.9 | |
| — | 5.00 | — | — | ||
| Supply of Remote Terminal Unit (RTU) to monitor 128Digital and 16 Analog inputs as per IRS:S: 99-2026 Rev.1.0 or latest. With one number of inbuilt dual card leased line modem for networking purpose. The RTU should be compatible for networking with existing NMDL system of JBP division. INSPECTION BY RDSO | — | — | — | 9,19,520 | |
| — | 5.00 | — | — | ||
| Supply and installation of External Modem for networking of RTU's as per RDSO Specification no. IRS:S: 99-2026 Rev.1.0 or latest, suitable with existing dataloggers/ RTUs of JBP division. INSPECTION BY CONSIGNEE | — | — | — | 1,72,410 | |
| — | 5.00 | — | — | ||
| Supply of Electrically operated lifting barrier assembly as per RDSO spec.no. RDSO/ SPN/ 208/ 2012 (Ver 2.0) with Amendment -1or latest. Each consisting of2 nos. electrically operated lifting barriers, 2 Pedestals, 2Nos. of 8 contract circuit controller with limit switch, hand cranks,2 electric motors 110 VAC 0.5 HP without centrifugal switch, 2G.I Octagonal booms as per RDSO Drawing RDSO/S-11600 in 4 section of 8 feetlong each, with 2 stop boards, boom light boxes, MS. counter weights & 2 nos. of boom support for resting boom & boom resting assembly along with Gate Control Panel, indication panel on sheet metal fabricated box with switches and buttons to operate the gate as per Spec except (a) motor current is max. 5 Amps. for 0.5 HP motor & motor confirms asper spec (b) Wago terminal to be used instead of Elmexor M-5 terminals. (c) Circuit Controller should have CAM operated Siemens or Similar limit switches instead of wiping type contacts. Crank handle arrangement will be as per Rly. Requirement. The movement of the boom over 85 degrees to be restricted mechanically. INSPECTION BY RDSO | — | — | — | 19,11,240.7 | |
| — | 30.00 | — | — | ||
| Supply of Tag Blocks 200 way with cover as per IRS:S- 77/2006 (Rev. 1) with latest amendment and DrgNos.SA-24751. INSPECTION BY RDSO | — | — | — | 56,222.7 | |
| — | 2.00 | — | — | ||
| Supply of MEGGER : Analog-Digital insulation and continuity tester as per technical specifications attached. Include make: Metravi DIT-99A/Statone SIT-500 or similar. INSPECTION BY CONSIGNEE | — | — | — | 16,401.52 | |
| — | 5.00 | — | — | ||
| Supply of LED type, Indication cum operating panel to made of exchangeable Domino units of each unit of size 54 mm x 34 mm cover plates depicting the yard layout signal units, track circuits etc. of minimum size (12X8). Siemens type dominos complete wired with full components. The panel should have poly carbonated sheet cover on the top to avoid damages while in service. Each of working domino unit should have all terminals. Total number of domino (12 X 8) = 96 Nos. size 54 x 34 mm. The length approximately 730 mm X 450 mm. The height is approximately 910 mm (rear side) and 820 mm (front side). The panel will be LED illuminated (2 Nos. of magnet, 2 Nos. of bulb extractor & 10% of spares of all LEDs of each colour to be supplied along with panel - (For LC gate). The spare items will be supplied in one good quality carry bag of proper size. INSPECTION BY CONSIGNEE | — | — | — | 1,14,589.1 | |
| — | 10.00 | — | — | ||
| Supply of Key Lock Relay AC immunized with different ward combinations (Five set of same ward plate for Point Machine to be supplied with each relay) of Siemens Make working on 60V DC or functional equivalent. INSPECTION BY RDSO | — | — | — | 87,257.1 | |
| — | 60.00 | — | — | ||
| Supply of relay universal LED ECR, QECX 61 4F/4B INSPECTION BY RDSO | — | — | — | 3,67,207.2 | |
| — | 10.00 | — | — | ||
| Supply of Goods warning Boardas per RDSO Drg Nos. SA 2380(Adv). Paint and retro reflective arrangement as per drg NosBPL/S&T/M/47 INSPECTION BY CONSIGNEE | — | — | — | 34,832.4 | |
| — | 300.00 | — | — | ||
| Supply of INDICATIVE TYPE OFFUSE INSERTS. With holder 1.6A (System, Rapid or MalnadMake or similar). INSPECTION BY RDSO | — | — | — | 27,282 | |
| — | 165.00 | — | — | ||
| Supply of INDICATIVE TYPE OFFUSE INSERTS. With holder0.6A(System, Rapid or Malnad Make). INSPECTION BY RDSO | — | — | — | 14,379.75 | |
| — | 10.00 | — | — | ||
| Supply of Limits Switches compatible with Global/ Heidz or similar make, without hand generator ELB as per RDSO/SPN/208/2012(Ver 2.0). (Material will be supplied only from approved vendors of RDSO) INSPECTION BY CONSIGNEE | — | — | — | 12,501.7 | |
| — | 20.00 | — | — | ||
| 12 Volt Hooter 12 make Radix mindamacony or equivalent as per requirement of consignee. INSPECTION BY CONSIGNEE | — | — | — | 5,767 | |
| — | 80.00 | — | — | ||
| Supply of Relay Non-AC Immune, plug-in-type, DC Neutral Line 60V4F/4B, 5F/3B, 6F/2B contacts, front and back contacts metal to metal, conforming to IRS: S 46 and firm's specification. The relay housing shall contain two miniature identical relays in mini group housing complete with base plate (Base plate Inspection by consignee), Maketo be supplied as per existing installation INSPECTION BY RDSO | — | — | — | 10,19,912 | |
| — | 20.00 | — | — | ||
| Supply of Relay Plug In type, two DC neutral line, mechanically interlocked, in mini group housing, complete with base plate (Base plate Inspection by consignee) each60V, 4F/4B contacts, front andback contacts metal to metal conforming to IRS: S 46 and firms specification. Siemens make (RSSK 30/0012) or functional equivalent. Make to be supplied as per existing installation INSPECTION BY RDSO | — | — | — | 2,04,329 | |
| — | 10.00 | — | — | ||
| Supply of Relay Plug In type two DC neutral line in mini group housing, complete with base plate (Base plate Inspection by consignee) consisting of Top relay AC immunized & Bottom relay both AC immunized, each 60V,5F/3B, contacts, front and back contacts metal to metal conforming to IRS: S46 and firms specification. Siemens make (RSSK 30/0078-1), ABB or functional equivalent As per site requirement INSPECTION BY RDSO | — | — | — | 1,13,153.7 | |
| — | 20.00 | — | — | ||
| Supply of Main Signal Post 140 mm outer dia 4.5 Mtr Length as per spec Nos IRS S 6/81 with latest amendments. INSPECTION BY CONSIGNEE | — | — | — | 1,26,020.6 | |
| — | 20.00 | — | — | ||
| Supply of Cast Iron Main signal surface base 140mm as per spec Nos IRS S 10 and Drg Nos 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal 5.5 50 Mtrs long as per RDSO Drg. Nos. SA- 23156. & signal front staging complete assembly. INSPECTION BY CONSIGNEE | — | — | — | 2,32,909.6 | |
| — | 10.00 | — | — | ||
| Non Metallic (FRP) colour light signal housing multi unit type for railway signalling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Ver. 1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest INSPECTION BY CONSIGNEE | — | — | — | 3,02,596.1 | |
| — | 5.00 | — | — | ||
| Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M (Adv.) and as per SPEC. No. RDSO/SPN/194/2006 Rev.2.0 or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. INSPECTION BY CONSIGNEE | — | — | — | 1,36,675.6 | |
| — | 5.00 | — | — | ||
| Supply of "4 aspect" Signal Unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2.0 or latest complete and to suit LED signal Lamps and suitable for 140 mm dia post saves pigment finish on the back side of the and inside. white pigment finish inside the 4 aspect unit to avoid any extra paint cost. INSPECTION BY CONSIGNEE | — | — | — | 1,97,774.9 | |
| Supply of failsafe electronic flasher device RDSO/SPN/173/2002 (Amndt-1) or latest. INSPECTION BY RDSO | — | 5.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
3JPO10-1-2412-6-23.pdf
ATTACHMENT
1GCCWORKS2022ACS1TO12.pdf
ATTACHMENT
MAKEININDIAPOLICY.pdf
ATTACHMENT
eBGletterdated16.06.2026.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf SHRAMIK KALYAN LETTER
ATTACHMENT
TD-35-InterlockingofLC05nos.pdf
ATTACHMENT
4Letterforshramikkalyanportal_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .