Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.8 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L-1 | Accepted-AOC Accepted Being L-1 | |
| 2 | L-2₹5.8 L+₹93,967.25 (19.4%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-2 | Rejected-Finance Other Than
L-1 | |
| 3 | L-3₹6.3 L+₹1.5 L (30.2%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-3 | Rejected-Finance Other Than
L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Copy of EPF code number/allotment letter has not been uploaded/submitted and also copy of enlistment letter has not been uploaded/submitted |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR AND MAINT TO E/M INSTALLATION, PATH, ROOF ETC AND OTHER CONNECTED B/R WORKS OF ARMY AVN SQN UNDER AGE (I) CIF (K).
2022_MES_531890_1
CA NO. AGE(I) CIF (K)-49/2022-23
Open Tender
Civil Works
Item Rate
180 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹20,000
Yes
11 Aug 2022
18 Jun 2022
3 Aug 2022
18 Jun 2022
1 Aug 2022
2 Jul 2022
Amount
Demolition of cement concrete un reinforced of any description and in any position not otherwise specifically provided for, including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge..
Plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, 100mm thick, as in sub-base of floor/path, sub base etc. finishing surfaces even and rough to receive topping layer, complete all as specified and as directed by the Engineer-in-Charge.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.
Brick work with subclass 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortor 1:6, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, bed plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge.
Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by the Engineer-in-Charge.
Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.
Rendering 10 mm thick on fair faces of brick or on concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and as directed by the Engineer-in-Charge.
Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty on walls, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.
Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.18sqm, but not exceeding 0.38sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Demolition of stone slabs and tiles, laid bedded and pointed in any mortor of any description or thickness in floors, aprons etc. complete all as specified as directed by the Engineer-in-Charge.
Machine cut kota stone slab 20 to 25 mm thick, as in flooring, stair case landing, treads of steps etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 15 mm thick screed bed or bedding layer in cement mortor 1:6, complete all as specified and directed by Engineer-in-Charge.
Machine cut kota stone slab 20 to 25 mm thick, as in vertical surfaces such as risers, skirting and dado etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by the Engineer-in-Charge.
Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and asdirected by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description exceeding 2 sq.m each, complete all as specified and directed by the Engineer-in-Charge.
Plain framed , panelled shutters (any numbers of panels), 35mm thick, made of 2nd class soft wood (kail), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowkats, complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description not exceeding 1 sq.m each, complete all as specified and directed by the Engineer-in-Charge
Glazed and skeleton shutters, 30mm thick, made of 2nd class soft wood (kail) open rebated and prepared to receive glass, gauze, etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.23(b) for doors etc are provided with stiles and rails, complete all as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by the Engineer-in-Charge.
Sheet glass 4mm thick ordinary quality and glazing with oil putty/pins/spring pins or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified as directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked) ,complete all as specified and as directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked) ,complete all as specified and as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium handle, cast type, anodised, 150 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Aluminium handle, cast type, anodised, 100 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified and directed by the Engineer-in-Charge.
Preparation of new or previously untreated wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified as directed by the Engineer-in-Charge.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified and as directed by the Engineer-in-Charge.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out and removing surplus soil to a distance not exceeding. 50 metre and making good surface in soft/ loose soil , complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified as directed by the Engineer-in-Charge.
Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified as directed by the Engineer-in-Charge.
TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by the Engineer-in-Charge.
Mild steel screw bolts (machine made) dia of neck 12mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10cm but not exceeding 15cm long, complete all as specified as directed by the Engineer-in-Charge.
Dismantling fencing wire mesh, any type (chain Link fence) , complete all as specified and as directed by the Engineer-in-Charge. .
Supply only chain link MS galvanised fencing, made out of 4mm dia galvanised iron wire of mesh 50mm x 50mm in size, complete all as specified as directed by the Engineer-in-Charge.
Fixing only chain link fencing to RCC/mild steel Posts fixed with MS Flat iron and 3 Nos of 10mm dia. MS bars as line wire including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed by the Engineer-in-Charge. Note :- MS Flats and round bars to be measured and paid separately under relevent items of this BOQ.
Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., fixed in repairs, complete all as specified as directed by the Engineer-in-Charge. Note:- Each line wire to be measured seperately
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel anging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 Gde E-165 , complete all as specified as directed by the Engineer-in-Charge.
Steel rolling shutters made up of 1.00mm thick laths, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including Safety lever locks mild steel with 4 levers for rolling shutters, including dismantling existing rolling shutter, complete all as specified as directed by the Engineer-in-Charge.
Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed
Note :- An amount of Rs. 56,560.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S SHEIKH FEROOZ AHMAD
M/S SHIMAR STAR GLACIER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .