ANNUAL MAINTENANCE OF SMALL ARM FIRING RANGE , WATER PROOFING TREATMENT , CAMOUFLAGE PAINTING AND WELCOME MAINTENANCE IN CERTAIN BUILDINGS AT SITE P AFS THANE UNDER GE AF THANE

Amount

M & L for preparing plastered or unplastered old surfaces, including Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of white wash, complete all as specified and as directed by Engr-in-charge .On the following surfaces:-

On wall

On ceiling

M & L for preparing plastered or unplastered of old surfaces of walls including Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil bound distemper on walls , complete all as specified and as directed by Engr-in-charge.

M&L for complete removal of existing treatment on surface of wall etc in any position washing down with water and cleaning the surface from all loose dirt, chalk, grese, fungi, algal, flakes etc, and applying two coat of weather proof acrylic paint over a coat of weather proof primer , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of surface plastered or unplastered old surface of wall and applying one coat of acrylic paint on wall , complete all as specified and as directed by Engr-in-charge.

M & L for complete removal existing treatment for preparaing plastered or unplastered old surfaces of walls including Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of Oil bound distemper on walls over a coat of primer , complete all as specified and as directed by Engr-in-charge

M & L for preparing plastered or unplastered old surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil bound distemper on ceilngs , complete all as specified and as directed by Engr-in-charge.

M&L for Complete Removal of existing treatment on ceilng and applying two coat of Oil bound distemper over primer , complete all as specified and as directed by Engr-in-charge.

M&L for 3 mm thick wall care putty on wall , complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old painted surfaces of wooden, over 10 cm width or girth ,and apply one coat of synthetic enamel paint etc,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of old painted surfaces of steel, over 10 cm width or girth ,and apply one coat of synthetic enamel paint etc ,complete all as specified and as directed by Engr-in-charge.

Taking down or up steel water tubing and connections including cleaning for refixing bore of pipe 15mm dia , complete all as specified and as directed by Engr-in-charge.(Note: Old serviceable steel tubing and other connected accessories retrieved from this item shall be used against relevent item of sch A).

M&L for Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) , complete all as specified and as directed by Engr-in-charge.

M&L for galvanised iron tube 15mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors , complete all as specified and as directed by Engr-in-charge.(Note: Old Seviceable galvanised iron tube obtained from this item shall be used against relevent item of Sch A).

S & F,in repairs, Bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia ,complete all as specified and as directed by Engineer-in-charge.

S&F, in repairs, Stop valves,for 15mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed by Engr-in-charge.

S & F ,in repairs, PVC connections 15mm size with PTMT nuts of length 600mm long on both ends and washers ,complete all as specified and as directed by Engineer-in-charge.

S & F, in repairs, Pillar taps, for 15mm bore dia of pipe,cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , complete all as specified and as directed by Engr-in-charge.

S&F, in repairs, brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15mm dia , complete all as specified and as directed by Engr-in-charge.

S&F,in repairs, orrisa pattern viterious china ware white glazed WC 580x440mm with integral foot rest and fix salt glazed stoneware traps "P" type with 100 mm bore of pipe fixed in repairs setting the trap and pan in 150mm thick all around lime concrete (1 lime : 2 sand) including taking down old trap , complete all as specified and as directed by Engr-in-charge.

S&F,in repairs, wash down water closet (pedestal pattern) (excluding flushing cistern or flush pipe) , complete all as specified and as directed by Engr-in-charge.

S&F,in repairs, PVC High/Low level flushing cistern of 10 litres capacity including all fittings i.e float valve, syphon, flushpipe,brackets , complete all as specified and as directed by Engr-in-charge.

S&F ,in repairs, vitreous china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets cromium plated wastes coupling ,cutting for and pinning in ends of brackets or erecting stand and other fittings , complete all as specified and as directed by Engr-in-charge.

S&F Plastic water closet seat cover ,white , closed pattern with flat bottom, and cover and mild steel hinge chromium plated , complete all as specified and as directed by Engr-in-charge.

S&F,in repairs ,brass cromium plated shower rose with swivel joint of 125 mm size , complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water , complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15 mm thick on concrete surfaces in CM 1:6, finished even and smooth (without using extra lime or cement) , complete all as specified and as directed by Engr-in-charge .

M&L for rendering 5 mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol , complete all as specified and as directed by Engr-in-charge.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over primer on walls , complete all as specified and as directed by Engr-in-charge.

M & L for preparation of newly plastered surfaces of ceiling and applying two coat of Oil bound distemper over a coat of primer on ceiling , complete all as specified and as directed by Engr-in-charge.

S&F, in repair, stainless steel CP health faucet with 8mm Dia,1 Meter Long Flexible Tube & Wall Hook complete all as specified and as directed by Engineer-in-charge (Make : Prayag, Seiko, Cera,Jaquar )

S&F, in repair, 15mm two way bib cock for health faucet ,complete all as specified and as directed by Engineer-in-charge

S&F, in repair, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed by Engineer-in-charge

S&F, in repair, 25 mm matt finish Stainless steel curtain rod best quality as approved by Engr-in-charge

S&F, in repair, Stainless steel socket bracket with bore of 25mm for dead end of curtain rod ,complete all as specified and as directed by Engineer-in-charge

S&F, in repair, Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod ,complete all as specified and as directed by Engineer-in-charge.

S&F, in repair, Stainless steel projecting bracket to support curtain rod of size 25mm ,complete all as specified and as directed by Engineer-in-charge.

S&F stainless steel sink, without drainage board 1mm thick for kitchen or laboratory , with plug,waste pipe,washers, including bedding in cement morter on to dwarf walls or including fixing cantilever brackets , connecting union etc,overall size 495mm x 420mmwith bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed by Engineer-in-charge.

S&F stainless steel sink, with drainage board 1mm thick for kitchen or laboratory , with plug,waste pipe,washers, including bedding in cement morter on to dwarf walls or including fixing cantilever brackets , connecting union etc,overall size size 915mm x 460mm bowl size 410mm x 330mm x160mm.

S&F, in repair, Grating ,complete all as specified and as directed by Engineer-in-charge.

S&F SS peg sets of six hookes ,complete all as specified and as directed by Engineer-in-charge.

M&L for filling HDPE sand bags khaki of size 30cmx30cmx80cm with sand closing the open end with nylon wire complete all as specified and directed by Engr-in -charge.sand bag Cat NoB/N/IV manufactured by- DCPL or Equivalent.

M&L for stacking of screnned seive fine sand in any shape/position as approved by engineer in charge Note :- Rates of mixing of sand and saw dust in propotion as decided by Engr-in- charge and lifting the mixture up to 6.00m and laying in slope is inclusive in the rates.

M&L for stacking of saw dust in any shape / position as approved by Engineer in charge, ,complete all as specified and as directed by Engineer-in-charge. Note :- Rates of mixing of sand and saw dust in propotion as decided by Engr-in- charge and lifting the mixture up to 6.00m and laying in slope is inclusive in the rates..

Labour for extraction of existing mixture and sieveing, lifting, laying, stacking and depositing the mixture ,complete all as specified and as directed by Engineer-in-charge.

M&L for raised pointing in cement mortar 1:4 to random or polygonal rubble uncoursed or brought upto courses ,complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc ,complete all as specified and as directed by Engineer-in-charge. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of debris/retrieved materials shall be thrown out of site at place as directed by the Engineer-in-Charge.

Ditto same as per Item No 47.00 above but for reinforced cement concrete.

M&L Brushing neat cement slurry with 3 kg of cement per sqm ,complete all as specified and as directed by Engineer-in-charge.

Material and labour for providing plain cement concrete type B- 1, (1:2:4) using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after

M/L for rendering 10mm thick on CM (1:4) on concrete roof top and chajjas surface finished even and smooth (without using extra cement) to get uniform level surface for laying of membrane treatement,using integral water proofing compound (water proofing compound will be paid seprately)

Supply only integral water proofing compound ,complete all as specified and as directed by Engineer-in-charge.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) , complete all as specified and as directed by Engr-in-charge.

Removing existing water proofing treatment where so ever exist (except concrete padding) and removing debris/rubbish off the site as directed , complete all as specified and as directed by Engr-in-charge.

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment for:- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : TEXSA/BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced (4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 3 mm mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer ,complete all as specified and as directed by Engineer-in-charge.

Disconnecting existing PVC water tanks of any description of capacityexc 250&n exc500 litre setting aside for repairs ,work over roof slab and hoisting if required, reconnecting and refixing in position ,complete all as specified and as directed by Engineer-in-charge.

Disconnecting existing PVC water tanks of any description of capacity exc 500 & n exc1000litre ,setting aside for repairs ,work over roof slab and hoisting if required, reconnecting and refixing in position ,complete all as specified and as directed by Engineer-in-charge.

Disconnecting existing PVC water tanks of any description of capacity exc1000 Lit & n exc 2000 litre, setting aside for repairs ,work over roof slab and hoisting if required, reconnecting and refixing in position, complete all as specified and as directed by Engineer-in-charge

S&F for gun metal globe or gate valve for 15mm bore dia of pipe ,complete all as specified and as directed by Engineer-in-charge.

S&F for gun metal globe or gate valve for 20mm bore dia of pipe ,complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Ball valves for 20mm bore dia of pipe,high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) ,complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Ball valves for 25mm bore dia of pipe high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) ,complete all as specified and as directed by Engineer-in-charge.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises ,complete all as specified and as directed by Engineer-in-charge.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) ,complete all as specified and as directed by Engineer-in-charge.

Materials & labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately.

Dismantling water tanks (exc 500 liter but n exc 1000 liter capacity) and removing to store ,complete all as specified and as directed by Engineer-in-charge.

Hoisting and Fixing Rotational moulded polyethylene water storage tanks of 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and as directed by Engineer-in-charge.

M&L for pre-cast cement concrete block masonary type C1 1:3:6 (20mm graded aggregate) set in cement concrete (1:4) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed by Engr-in-Charge.

Material and labour for 15 mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in bottom layer & 5 mm in top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished fair and even ,complete all as specified & as directed by Engr-in-charge. Note :- WPC shall be measured and paid separately.

M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer with camouflage pattern ,complete all as specified & as directed by Engr-in-charge.

M&L complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi,algal, flakes etc, and applying One coats of weather proof acrylic paint over a coat of weather proof primer with camouflage pattern ,complete all as specified & as directed by Engr-in-charge.

M&L for preparing new plastered surfaces of wall and applying two coats of acrylic weather coat exterior paint over a coat of weather coat primer with camouflage pattern ,complete all as specified & as directed by Engr-in-charge.

M & L for preparation of old powder coated galvalume sheet surface by scrubbing 100% surface with emery paper or mechanical scrubber to achieve 100% surface roughness including necessary scaffolding for slopped roof of building upto 25 metre height etc complete all as specified. Note:- Necessary safety measures for working labours shall be done by contractor before commencement.

M & L for cleaning and preparation of old painted surface of slope roof and applying two coat of synthetic enamel paint in different shades of camouflage pattern including necessary scaffolding for slopped roof of building upto25 metre high etc complete all as specified & as directed by Engr-in-charge.Note: - Necessary safety measures for working labours shall be done by contractor before commencement.

M & L for cleaning and preparation of old painted surface of steel and applying one coat of synthetic enamel paint in different shades of camouflage pattern including etc complete all as specified & as directed by Engr-in-charge. Note: - Necessary safety measures for working labours shall be done by contractor before commencement.

Atharva Enterprises