Civil Works

Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/ cuddapah slab and clearing away etc., complete complying with standard specification and as directed by the Departmental Officer.s.

Dismantling, removing and carefully stacking Reinforced cement concrete and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling, removing and carefully stacking Plain Cement Concrete and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling the weathering course and pressed tiles from roof and clearing away the debries neatly from the site etc. complete complying with standard specification and as directed by the departmental officers.

Clean removal of cement plaster from old walls clearing away from the site including labour charges,cleaning charges etc., complete and as directed by the departmental officers

Finishing the top of roof with one course of machine pressed tiles of 230x230x16/18mm size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc

Paving the floor with best quality vitrified Tiles of following size Double charged Vitrified Tiles 600 x 600 x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with ceramic tiles of following size 305 mm x 305 mm x 8 mmand variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)