REPAIR TO FENCING, BOUNDARY WALL, DRAIN AND HARD STANDING AND OTHER MISC WORK AT WESTREN COMPLEX OF AGE B/R IV AT MCTE UNDER GE (MCTE) MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded coarse aggregate in foundation complete all as specified.

M&L for providing PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in drains/ surface, channels including form work all as specified and as directed by Engineer-in-charge.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed by Engr-in-Carge.

M&L for preparation of new surfaces of walls, applying two coats of Premium Acrylic Smooth exterior paint over a coat of primer on Walls over a one coat of wall putty (Asian paint or Equivalent) as per manufacturers instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ roller/ Airless spray machines to building upto any height all as per directed by Engr-in-Charge).

Distmantling of post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed gound

Dismantling of fencing or wiremesh, any type

S&F in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Restraining and resecuring steel barbed wires of any description including making good staples etc.

S&F chainlink fencing, MS galvanised of mesh size and dia of wire as directed by Engineer in Charge

Excavation in hard/ dense soil as in post holes each n.exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil all as specified.

M&L for cement concrete in foundations, filling, bed blocks and mass concrete type B-2 (1:2:4) (40mm graded aggregate) complete all as directed.

M&L for Providing reinforced cement concrete type B-1 (1:2:4) (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing average sectional area n. exc. 100 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops including necessary form work as directed and fixed.

S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work all as specified and directed

S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed and to be fitted with washers and one hexagonal or square nuts n. exc 5 cm long and dia of neck 10mm

S&F mild steel bars 10mm dia and over cut to length bent to shape and fixed in chain link fencing to keep it straight.

M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending including binding with mild steel wire (annealed) not less than 0.9mm dia

All as per item No 22 above but 5mm dia and over upto and including 10mm dia bars as in stirrups

Dismantling boarding, jallies of any description fixed in any position

M&L for Providing precast cement concrete louvres and jallies, 35mm thick type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar (1:4) (mea-sured solid), including all mouldings but excluding frame

M&L for PCC 75mm thick type B2 (1:2:4) (using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thick finished surface rough to receive tiling all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m all as directed by the Engineer-in-charge.

M&L for plan,modular size kiln well burnt sub-class 'B' bricks, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

M&L for brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4

Dismantling wrought iron or mild steel work of any description etc

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for Mild steel frame works as in gates ornamental and intricate design including pintal hinges complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

M&L for PCC 75mm thick 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base finishing the surface rough to receive tilies.

M&L for pre polished coloured cement concrete chequered tile of approved quality size 300 x 300 x 25mm thick on floors over and including 20mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/ path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 grade laid dry in floor/ path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and directed.

Removing excavated material exc 50m but n exc 250 m away from MoD Land form the starting point.

Robin Associates

M/S GARG CONSTRUCTION

sunway associates

PREMCHAND BHAWANI SAHAI

APconstruction

Sameer Auto Engineers

MODI CORPORATION