PROVN OF MOSQUITOES PROOFING OF 654 EME,PROVN OF WATER COOLER FOR OFFICE COMPLEX AND JCOS/OR LIVING AREA OF EME RECORDS AND CERTAIN MINOR WORKS OF AGE B/R (S) NO I , II AND AGE E/M (S) UNDER GE (SOUTH) SECUNDERABAD

Amount

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in Hard/dense soil complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc. 1.5 m in depth; for for foundation,etc. or for shafts, wells,cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in Hard/dense soil complete all as specified and as directed.

Returning, filling in incl spreading, levelling,watering and well ramming in layers not exc 25 cm thick. complete all as specified and as directed.

M&L for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.

M&L for sand cushion 50 mm thick for laying and fixing interlocking tiles. complete all as specified and as directed.

Removing excavated materials (soils) to a distance n.exc 50 m and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Excavation in post holes each n.exc 0.5 cum each getting out in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thickness complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2, (using40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed

M&L for providing cement concrete 1:3:6 type C-0 using 12.50mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L PCC 1:3:6 type C2 (using40 mm graded stone aggregate)as in foundation filling and post holes complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping, kerbs and similar work etc including necessay form work complete all as specified.

M&L for brick work with sub class B bricks ,straight or curved on plan exc 6m mean redius built in cm 1;6 complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed.

S & fixed in repairs 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area .exc 13 sq cm and n.exc 25 Sq cm . complete all as specified and as directed.

Taking down Chowkats or frames with shutter exc 1.5 Sqm but not exceeding 4 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and as directed.

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 2nd class Hard Wood 35mm thick Glazed and Skeleton shutter open Rebeted and prepared to receive glass, guage etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass guage etc size of member of shutter OF Window and ventilator etc are provided with stiles adn rils as specified in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. complete all as specified and as directed.

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified

S & F mild steel Butt hinges100 mm long medium weight, cold rolled . complete all as specified

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. complete all as specified

S & F 150mm long MS pressed handles oval type stove enamelled black. complete all as specified and as directed.

S & F 125 mm long MS pressed handles oval type stove enamelled black. complete all as specified and as directed.

S & F 200mm long MS barrel tower bolt, stove enamelled black with bright bolts. complete all as specified and as directed.

S & F 150mm long MS barrel tower bolt stone enamelled black with bright bolt and fixed. complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples. complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 165 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L steel windows with side hung shutter including friction/Projecting hinges with steel handle and two No 100mm mild steel bolts and two peg stays on each opening shutter complete with glazing bars dove tailed or welded including a shop coat red oxide of zinc chrome primer complete all as specified.

All as per item No 34 above but without glazing bar including flat iron stiffener and suitable size nuts, bolts but without peg stays. complete all as specified

M&L for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

Roof trusses (framed), trussed, purlines, crane gantries,rails & fastnings & heavy brackets framing (Beam,tee,angle,chanel or elat sections0 including distance pieces cleats etc (fe 410-W(Gde-E-250) quality complete all as specified and as directed.

S&F framed work as in door or gates of angle or other sec with gusset plate to fixing steel including vent etc Gde Fe-410-W complete all as specified and directed.

S&F for Mild steel sheet 1.25 mm thick as in covering of doors etc. complete all as specified and directed.

M&L for provn of false ceiling with anodised aluminium snap grid frame work with size of grid 600 x 600mm with aluminium main tee size 25 x25 x 1.6mm, cross tee of size 25 x 25 x 1.6mm and aluminium wall angle of size 25 x 25 x 1.8mm fixed to walll hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire .complete all as sepcified and directed by Engr-In-Charge.

S & F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed..

M & L 4 mm thick non Asbestos Cement Plain building boards, fixed to timber/ Aluminium frame work with screws in ceilings and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and directed by Engr-In-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M & L for 25 mm thick PCC 1:2:4, type B-0, (12.5mm graded aggregate) as base in floor complete all as directed and as specified

M&L for 75 mm thick PCC 1:4:8 type D2 using (40mm graded aggregate) as in sub base of floor etc complete all as specified and as directed.

M&L 40 mm thick plain cement concrete 1:2:4 type B1( using 20mm graded stone aggregate) as in floor, finishing cement concrete surface fair and even without using extra cement complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-35 Grade of approved colour and design complete all as specified and directed.

M & L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors over a 20mm thick screed bed in CM 1:6. complete all as specified and as directed.

Taking down cement plaster/terrazzo finish on brick/RCC/Stone walls of any description including racking out joints hacking for keys scrubbing down with water etc. complete all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick on brick work or concrete fair surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of new plaster surface of walls and applying two coat of oil bound distempers over one coat of primer and two coat of wall care putty complete all as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square panels or with wooden bead n.exc 0.50 Sqm each pane. complete all as specified and as directed.

M&L for Preparation of New wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S & F sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F 15mm bore tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 20mm bore tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 15mm bore bib taps, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule including flench as in repair complete all as specified and directed.

S & F 15mm dia Gun metal gate valve with iron wheel head screwed down both ends for iron pipeof size, fittings etc and unions complete all as specified and direcrted by Engineer-in-Charge.

Demolition of Brickwork or stone / boulders masonry laid dry built in cement mortar complete all as specified

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed

Supply, installation, commisioning of drinking Water Cooler self contained storage type capacity 40/80 with two faucets & conforming to IS 1475 part I, 2001 suitable for operation on 230 volts +/- 10%, 50 Hz, single phase, AC supply complete with stainless steel storage Tank, stainless steel body (front panel and other three sides) including fitted with energy efficient Compressor working with (CFC free refrigerant) and necessary water connections complete all as specified and as directed by Engr-in-Charge. Make :Blue star/Voltas/ Usha

All as per item NO 67 above but storage capacity 60/120 Litres

All as per item NO 67 above but storage capacity 150/150 Litres

S & F Voltage stabilizer buck/ boost transformer type with automatic operation on single phase equiped with low and high voltage correction electronic transistorized relay suitable for correction single phase AC supply, 50 cycle complete with voltmeter and designed for in put voltage from 170-270 volts and out put voltage stabilized between 215 to 240 Volts up to 5 Amps/ 1.0 KVA capacity complete all as directed by Enge-in-Charge. Make:- Sinetrac/Microtec/Vinitec/Aplab/V Guard

M&L for point wiring with 4 sqmm single core copper conductor multistandard PVC insulated cable FRLS type 1100 volts grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6mm thick MS, duly painted with red oxide metal primer incuding fixing/grouting sunken/surface as per site reuirement covered with 3 mm thick laminated sheet including running up of 4 sqmm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/sockets/regulators etc complete all as specified and as directed

S&F switch socket combination flush type multipurpose 2/3 Pin 5/15 Amps 2 in 1 230 volts all as specified.

K LAKSHMAN SINGH AND CO

SURA INFRASTRUCTURE