REPAIRS TO SUNKEN FLOORS AND SEEPAGE IN CERTAIN

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of PCC of any description and in any position as in sunken floor.

Petty repairs to joinery works such as easing of doos, windows, kitchen cabinets, refixing builder hardware gauage, etc, by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works directed by the Engineer-In-charge.

Petty repairs to plumbing / internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low levelled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union, etc as required at site and as directed by the Engineer-In-Charge.

Petty repairs to aluminium joinery works such as aluminium windows, aluminium ventilators and like similar works auch as easing of doors, refixing of doors, windows, refixing builder hardware such as aluminium beeding, etc., as required at site and as directed by the Engineer-In-Charge.

M & L for non skid ceramic coloured tiles 7 to 8mm thick square/ rectangular, size of tile 300 x 300 mm or above, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L of Non-skid Ceramic joint free tiles coloured shade size 600 x 600mm, 7 to 8 mm thick in (Squre / Rectangular) polished, area of each tiles not exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry of 3kg/sqm and pointed in white or coloured cement match complete incl hacking existing floor for proper bonding of tiles, etc., all as specified and directed.

M & L for screed bed for bedding layer of mortar 15 mm thick for laying floor finishes in cm 1:6.

Material and labour for glazed ceramic tiles 450x 300 x 7 mm jointed in cement slurry and pointed in white or coloured cement to match as in dados/skirting.

M & L for rendering 10 mm thick in cement mortor 1:3 on fair faces of brick work or concrete surfaces.

S&F in repairs Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan and fixed-in-repairs, complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedestal pattern) white, fixed in repairs (excluding fixing bolts, flushing cistern and pipe) including taking down.

Supply and fix plastic water closet seat cover any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing in repairs.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets and flush pipe of polyethylene of density of PVC 32 mm for low level cistern etc complete all as specified and directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F in repairs 32mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT Nuts of length 60cmmm and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs, health faucet (ABS Body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 metre long flexible connection and fixing in position, complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed

S & F in repairs bip taps 15mm chromium plated cast copper alloy with crutch or butterfly handle, screw down for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S & F in repairs stop valves 15mm , cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs , Brass chromium plated shower rose 125mm size

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet.

Taking up or down steel tubing and connections, 15mm bore.

Taking up or down steel tubing and connections, 20mm bore.

S & F 16 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified.

S & F 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified.

Taking down chowkhat with shutter (without taking off shutter from the frame)n. exc. 1.5 Sqm each all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete

S & F butt hinges 125mm size extruded aluminium alloy with galvanised mild steel hinge pin,anodised,all as specified.

S & F in repairs aluminium handles 150 mm size cast type anodised

S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete.

Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor.

Supply and fix PVC (SWR) bends 75 mm bore of any radius.

Supply and fix PVC (SWR) door Tee of size 75 mm.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 4th floor complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane above 4th floor complete all as specified and directed by Engr-in-charge.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 but except Blocks etc. complete.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement

M & L for rendering 10 mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M & L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound

M&L for preparation of new surface/undecorated surfaces surface of ceiling and applying three coats of white washing.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

S&F in repair galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Removing demolished material exc 1.5 KM but n.exc 5 KM and depositing where directed at a level n.exc 1.50 M above the starting points all as specified.

S&F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 liters and not exc 1000 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

S&F in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge

All as per item No.57 above, but, 1000 Ltrs capacity

S&F in repair round moulded PVC water tank lid for 500 litres / 1000 litres, complete all as specified and directed.

S&F steel plate rack for kitchen of approved make and size all as directed and as specified (Size - 900x600x200mm)

S & F in repairs old Floor door stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S& F in repairs of Acrylic Bathroom Corner Shelf 8"x8" inch curved shape, fixed in walls all as specified and as directed

S& F in repairs of Acrylic Soap Dish of 5" size, fixed in walls all as specified and as directed

S&F in repairs Glass Soap dish fancy type, fixed in walls all as specified and as directed

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws, fixed in walls all as specified and as directed

S&F in repairs MS Helical Door Spring fixed to doors complete, all as specified and as directed

S&F in repairs Mortise Door Locks of 6" inch size (2 levers) fixed to doors complete, all as specified and as directed

S&F in repairs of Mirror Cabinet 12"x18" of size, fixed to walls complete, all as specified and as directed

S&F in repairs of 1" dia size curtain rails of Aluminum alloy powder coated complete, etc, all as specified and as directed.

S&F in repairs of powder coated curtain rod brakets suitable for fixing 1" dia size curtain rail, fitted over wooden round gatta, complete etc, all as specified and as directed.

S&F in repair Chromium plated fancy type bib taps (Long Body) with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repair Chromium plated fancy type Kitchen Sink taps with wall flange, Swivel function, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in Aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs all as specified and as directed.

S&F in repairs of WPC door frames for bathroom/toilet doors of size 4x2inch or 4x2.5inch of density 0.55-0.6kg/m3 or above, colour - ivory or brown, fixed to walls, complete all as specified and directed.

S&F in repairs of WPC door shutters for bathroom/toilet doors of tk 27 to 29mm with density 0.55-0.6kg/m3 or above, colour - ivory or brown, fixed to walls, complete all as specified and directed.

M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, windows-cill, cooking platform and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with of pigment to match with shade of granite etc., including 20mm screed bed in CM1:4 all as specified and as directed.

Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

S&F in repairs of Ball brass valves, for 20mm dia pipe high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs of Ball brass valves, for 25mm dia pipe high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe) Fixed in repair.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe for half stall urinals.

M&L for 18/19mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work

S&F in repairs MS piano hinges for cupboards of size 18mm width fixed complete, all as specified and as directed

S&F in repairs of Toilet paper holder of brass, chromium plated or stainless steel, fixed to walls, complete, all as specified and as directed

Demolition of PCC of any description and in any position as in sunken floor.

Material and labour for Rendering 15 mm thick on fair concrete surfaces of roofs in CM (1:3) finished even and fair without using extra cement mixed with 3% Integeral Water proofing compound by weight of cement complete all as specified and as directed by Engr-in-charge. (Note: Integral Water proofing compound will be measured and paid for separately).

M&L for wire brushing and cleaning top surface of tiles, cement concrete, including flashings and jounction of parapets etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @ 1.70 Kg/Sqm and lightly tampered to the surface of sunken etc and S&F APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric land on primed surfaced by forced application complete all as specified.

Material and labour for PCC 1:5:10, type E-2, using 40 mm graded stone aggregate as in sunken slab filling.

Material and labour for PCC 1:2:4 Type B-1, 40 mm thick using 20 mm graded stone aggregate as in flooring finished fair and even.

M & L for rendering 10 mm thick in cement mortaor 1:4 on fair faces of brick work or concrete surfaces, finished fair & rough, complete, all as specified and directed.

S&F in repairs vitreous china EWC model CASCADE type (floor or wall mounted) in approved colour all as specified and directed as per ISI mark.

S & F in repairs stop valves 15mm , cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions all as specified and directed.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete and Supply and fix PVC (SWR) pipes single socketed 110 mm bore fixed in walls/Sunken floor up to 4th floor complete all as specified and as directed by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete above 4th floor and Supply and fix PVC (SWR) pipes single socketed 110 mm bore fixed in walls/Sunken floor complete all as specified and as directed by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete and Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor up to 4th floor complete all as specified and as directed by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete and Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor above 4th floor complete all as specified and as directed by Engr-in-Charge.

Supply and fix PVC (SWR) bends 110 mm bore of any radius.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm bore

S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 75 mm bore

Supply and fix PVC (SWR) door Tee of size 110 mm.

Material and Labour for cleaning of sewer lines from Manhole to Manhole of any depth and dia of pipe including testing sewer line by pouring water complete all as directed by Engr-in-Charge.

Cleaning of Manhole Upto 2m depth, any size and any depth including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Cleaning of Manhole Exc 2m but not exc 4m depth, any size and any depth including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as directed by Engr-in-charge (irrespective of depth and type of soil).

Cleaning blockages from Nahani trap to Gully trap by Roding etc and cleaning the sludge from NT taking up and refixing the grating in CM (1:3) including testing by pouring the water until smooth flow, complete all as directed by Engineer-in-charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Cleaning of blockages from Gully trap to 1st Manhole length of sewer line not exceed 5m by roding etc and cleaning all sludge from Gully trap to 1st Manhole including pouring water until the smooth flow and necessary earth work and disposed of sludge etc complete all as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Cleaning blockages from water closet including cleaning the soil pipe (for 1St and 6th floor) by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow including necessary earth work and making good damages if any to plinth protection Manhole etc., all as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed.

Removing / Bailing of sewage water the septic tank of various capacities and disposal outside MD land including cutting and removing all vegetable growth plants etc in around septic tank and filter bed etc and removing debris outside MD land.

Removal of sludge/disposal/sediment from septic tank of various capacities and disposal the same outside MD land including cutting and removing all vegetable growth plants etc including uprooting of small plants around septic tanks and filter beds and etc and removing debris outside MD land.

Removal/taking out of sludge muck consisting of loose aggregate sediments mud etc from filter bed and refilling the same after cleaning/washing into the filter bed.

Excavation in trenches not exceeding 1.5m wide and n. exc. 1.50 mtr deep and getting out in hard/dense soil.

Excavation in trenches but exceeding 1.5m deep and not exceeding 3.00m deep getting out in hard/dense soil.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete in hard/dense soil.

Removing excavated soil to a distance exceed 50m and not exceeding 100m and depositing where directed at level not exceeding 1.50m above the starting point.

Demolition and breaking up drain pipe (salt glazed stone ware) set in Cement Mortar, 150mm bore and getting out from trenches.

Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm.

Material and Labour for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed

Material and Labour for PCC (1:3:6) type C2 for bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as directed.

Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L for Pre-cast cement concrete block masonry type B1 1:3:6 (20mm agg) with solid blocks, exc 10 cm in width and setting in mortar 1:6 complete.

Material and Labour for Cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching including finishing the concrete surface even & smooth without using extra cement.

Material and Labour for forming fair finish to channel in manholes using extra cement.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

Material and Labour for rendering 15mm thick in CM 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement.

Material and Labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundation.

Demolition of concrete(reinforced) of any description and in any position not otherwise speifically provided.

Material and Labour for pre cast cover slab using PCC (1:2:4) type B1 and set in CM 1:6 with top surface finished even & fair complete all as specified.

M&L for formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter fair finished surface.

Material and Labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally or hoping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Supply only water proofing compound.

G K CONSTRUCTIONS

Siddivinayaka Constructions