PROVN OF HAY STORAGE SHED AT E AMF, RVC CENTRE AND COLLEGE AND PROVN OF 170 CEILING FANS FOR OTM ACCN OF 92 MED REGT AT SRC LINE MEERUT UNDER AGE B/R-II AND AGE E/M-I OF GE ( NORTH) MEERUT CANTT

Amount

Excavation in trenches for foundation n.exc 1.5 m wide and n exc. 1.5 m depth and not exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc 30 Cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material(soils) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling-in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregates) in foundation/filling /mass concrete complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:6 complete all as specified and directed..

M&L for reinforced cement concrete design mix M-25 (using 20 mm graded rushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20 mm graded rushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20 mm graded rushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 ( using 40 mm graded crushed stone aggregate ) as in plinth protection complete all as specified and directed.

Supply and fixing TMT steel bar 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. (Note :- rate of binding wire deemed to included in above rates )

-Ditto- but 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders -ditto-'

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished flat surfaces of conrete complete all as specified and directed.

M&L for formwork to sides of squar, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished flat surfaces of conrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished flat surfaces of conrete complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for cement plaster in CM 1:4 in two layers (10 + 5) first coat 10 mm and thick in CM 1:6 and second coat 5 mm 1:4 using WPC in 5 mm thick second layer on brick work or concrete surfaces finished even and fair. complete all as specified and directed.

Supply only integral water proofing compound (powder) only.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer complete all as specifiedand directed.

M&L for prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specifed and directed.

M&L for prepration of undecorated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains ,surfaces finished even and smooth complete all as specified and directed.

M& L for hardcore of broken stone boulders , gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick 1:3:6 tyoe C-2 (using 40 mm graded crushed stone aggregates) as in sub base of floor complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in flooring surfces finished even fair complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J-hooks, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J-hooks, complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE-290 Gde E-165 complete all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed copper conductor cable in and including PVC conduit of size 20 / 25 mm dia complete with all assessories/fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and duly complete all as specified and directed for the following. One Fan point/Exhaust Fan point controlled by one, one way switch 05/06 Amps

Supply and fix switch piano flush type, 05/06 Amps single pole, one way 240 volts complete all as specified and directed .

Supply and fixing of ceiling rose, 3 phase /PVC/polycarbonate isolated body complete all as specified and directed .

Supply only ceiling fans complete with blades, down roads, electronic regulator and accessories , 230 V, 1400 mm sweep, min air delivery 245 CFM with min service value 4.10 BEE, with brushless direct current motor (BLDC)

mohanlal gupta

AEGIS INTERNATIONAL

SA construction co.

Rajneesh Jain

Shri Kanchan Engineers

High Tech Metal India

veer enterprises