PROVN OF TOILETS NEAR SHEDS NO. 14 AND 15 AND PROVN OF URINALS AND WASH HAND BASIN FOR JBPT TRAINEE AND CERTAIN B/R AND E/M MAJOR REVENUE AND MINOR WORKS AT AIR FORCE STATION UNDER GE AVADI

Amount

SCH OF WORKS B/R PORTION: Surface dressing not exc. 15 cm deep in soft/loose soil and removing debris from site complete all specified and as directed

Excavation over area n exc 1.5 m wide and n. exc 1.50 m depth and getting out in hard/dense soil complete all specified and as directed

Excavation over area n exc 1.5 m wide and exc 3.00 m depth and getting out in hard/dense soil complete all specified and as directed

Excavation of trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation etc or for sharts, wells cessipts, manholes, pier holes, laying pipes, cables, erection of poles etc 10 Sqm on plan and getting out hard dense soil complete all specified and as directed

M&L PCC 1:4:8 type D2 (Using 40mm graded crushed stone aggregete) as in foundation and mass concrete complete all specified and as directed

M&L Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all specified and as directed

M&L Brickwork with old size fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all specified and as directed

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick wall , built in CM 1:4 complete all as specified and as directed

M&L Loose filling with brocken brick of gage 80 mm to 150 mm in sockage pit, sockage well etc complete all as specified and as directed

M & L Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even & fair without using extra cement complete all a directed

M&L Rendering 5 mm thick in CM 1:4 with WPC over 10 mm thick plaster in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed Note: WPC Shall be measured and paid separetely

M&L Rendering 15 mm thick on other than fair faces of brickwork surfaces in CM 1:4 finished even and smoth with out using extra cement as in setting coat mixed with WPC @ 3% by weight of cement and finishing even and smoth with out using extra cement all as specified and directed Note: WPC Shall be measured and paid separetely

M&L Plain cement concrete 40 mm thick as in DPC 1:2:4, type B0 (using 12.5mm graded stone aggregate) complete all as specified and as directed

M&L Hard core of guage not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as diretced

M&L Plain cement concrete 75 mm thick, type C2, 1:3:6 (using 40 mm graded stone aggregate) as in plinthprotection/ path etc finished surface even and smooth witout using extra cement complete all as specified and as directed

M&L Plain cement concrete, 1:4:8 type E2, 75mm thick (using 40 mm graded stone aggregate) as in sub base of floor etc., complete all as specified and as directed

M&L Plain cement concrete,1:2:4 type B-o, 25 mm thick as in floor even and fair complete all as specified and as directed.

M&L Plain cement concrete,1:2:4, type B-0, 25 mm thick as in floor even and smooth with out using extra cement complete all as specified and as directed.

M&L Prepration of newly plaster surface of wall and applying three coats white wash complete all as specified and as directed.

M&L Preparation new surface of wall applying two coats of cement based paint over coat of Primer on external wall surface complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soils complete all as diretced

Removing excavated material (soil) not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as diretced

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Mild steel roof trusses (any type frame ) trussed purlins,crane gantries rail and fastering and havy brackets framing ( beam tee angle, chenal or flate section plate including distance pices , cleats etc. complete conforming to Fe 410-0 or Fe 310-0 all as specified

M&L Preparation of new steel surfaces over 10cm width or girth not other wise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed

S&F Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular ) area of each tiles exceeding o.11 sqm but not exceeding o.18 sqm ,in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15 mm thick for laying floor finished use CM 1:6 complete all as specified.

S&F Glazed ceramic tiles in vertical surface of size 350x250x7mm, 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over rendering 10mm thick in cm 1:4 as in backing coat complete all as specified and as directed

S&F Vitreous china urinal partition white of size 310x700 mm about 40cm above floor line complete all as directed

M&L Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, win-dow-cills, cooking platforms and like in cementmortar (1:4) including point-ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20mm thick screed bed in CM 1:6 complete all as specified and as dirretced

S&F Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing grating and flushing pipe complete all as directed.

S&F in repair viterous China squatting pan Orissa pattern size 580x440 mm white intrigal foot (including flushing cistern of 10 liter and flushing pipe and pvc conection ) complete all as specified and as diretced

S&F Counter top vitreous china wash basin white flat back size 460 x 220 mm including waste fittings of brass chromium plated 32 mm (excluding waste pipe, taps chain and plug) complete all as speified fixed in repairs Make - Prayag Cat No 4793

S&F PVC (SWR) multi floor trap, plain with grating with hole as required including, jointing with solevent cement, 75 mm dia complete all as specified and as directed

S&F PVC connection 15 mm size with PTMT cut to length 300 mm long complete all as specified and as directed

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F 15 mm dia Pillar taps chromium plated fanyc type, screwed down high pressure with or with out letters HOT or cold with long screwed shanks and flug nuts scerwed for iron pipe and fixed all as directed Make: Prayag Cat No 8202

S&F 15 mm dia Bib tap CP brass fancy type long body any colour high pressure long body suitable for 15 mm bore fittings complete all as specified(weight not less than 120 gms Make: Prayag cat No 8308

S&F 15mm dia for angle cock cast copper alloy screwed down high pressure with cruten or butter fly handle screwed both end for iron pipe or for union all as specified.

S&F 25 mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe fixed

S&F GI tube 15mm bore medium grade including all fittings fixed to walls all as specified.

-Ditto- all as per item No. 41 above but 20mm bore tube.

-Ditto- all as per item No. 41 above but 25 mm bore tube.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hosited and fixed in position of 2000 ltr capacityall as specified in SSR part-1 complete all as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc complete including dismantling of pipes complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenchs complete all as specified.

S&F 75mm bore PVC SWR bend any radius all as specified

S&F 110 mm bore PVC SWR bend any radius all as specified

S&F 110 mm PVC ( SWR) WC connector with lip ring to fit wc outlet

S&F PVC(SWR) junction single (Single T) of 75mm dia bore

S&F PVC(SWR) junction single (Single T) of 110mm dia bore

S&F PVC (SWR) reducers 110mm

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

M&L RCC type B-1 1:2:4 (Using 20mm graded aggregates) as in slab supported on walls, beams and columns in floor, roof, landing, balconies, deck slabs and in shelves and the like..

M&L Providing precast cement concrete in landings, cover slabs (for manholes etc.)with Type B1, 1:2:4 using 20mm graded aggregate set in c.m.1:4 complete

Use and waste of form work rough finished flat surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200 mm thick (horizontal or slopping complete)

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.

M&L TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire

S&F Reinforced concrete pipe class NP2 laid and jointed complete with collars, 150mm dia complete all as specified

M&L Concrete bed to drain pipes, 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6, type C2 complete all as directed

Supply only Integral Water Proofing Compound

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification & drawings in SSR Part II of 2004.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 incl pvc hinges 100 mm size – 3 Nos for each shutter, Towel bolt size150mm - 02 Nos, Handle size 150mm - 02 Nos complete all as specified.

M&L Plain cement concrete, 75 mm thick, 1:4:8 type E2 using 40mm graded stone aggregate as in mass concrete,as in floor finishes etc., complete all as directed

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick of size as approved by GE set and jointed in neat cement slurry in floors with white cement and pigment over 20 mm thick screed bed in 1:4 complete all as specified

Demolition of cement concrete (un reinforced) in ground floor/paving n.exc 15 cm below or above ground level all as specified.

M&L Plain cement concrete, 1:4:8 type E2 (using 40 mm graded aggrigate), 100mm thick as in sub base of floor all as spacified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S&F in repair 25 mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe fixed

Taking down steel tubing and connections including cleaning for refixing or removal to store in 15mm dia tubes.

Taking down steel tubing and connections including cleaning for refixing or removal to store in 20mm dia tubes.

S&F Unplasticized PVC pipes of 15mm bore dia of pressure rating 10 kgf/sq. cm complete all as directed

S&F Unplasticized PVC pipes of 20mm bore dia of pressure rating 10 kgf/sq. cm complete all as directed

S&F Unplasticized PVC pipes of 25mm bore dia of pressure rating 10 kgf/sq. cm complete all as directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hosited and fixed in position of 1000 ltr capacityall as specified in SSR part-1

Taking down PVC pipes of any description

Excavation of trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation etc or for sharts, wells cessipts, manholes, pier holes etc 10 Sqm on plan and getting out hard/dense soil.

Removal of excavated surplus soil to a distance exc 50m and nexc 250m and depositing where directed at a level n exc 1.5m above the starting point and all as directed

M&L Reinforced cement concrete pipes, 200mm bore class NP2, laid and jointed complete with collars laid in trenches set and jointed in CM 1.:1 including demolition and breaking of existing salt glazed ware/AC/Reinforced pipe complete all as specified and as directed

M&L Concrete bed to drain pipes, 200mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6, type C2 complete all as directed

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed

M&L Plain cement concrete, 1:4:8 type D2, 50mm thick using 40mm graded stone aggregate as in mass concrete, paths to receive floor finishes complete all as directed

M&L Sand cushioning 50mm thick spread, levelled uniformly and consoladition erc., all as specified

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed

M&L for PCC 1:2:4, type B-I, using 20 mm graded stone aggregate as in cooping or chamfered on edge complete all as specified and as directed.

SCH OF WORKS E/M PORTION: Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia fixed on walls ,ceiling / roof trusses with suitable clamps and accessories etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls/fixed in wall, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for (a) one light point controlled by one switch.

(b) One Exhaust fan point controlled by one switch.

(c) One switch socket outlet 3 pin 5 Amps on same board along with other switches

(d) One switch socket outlet 3 pin 5 Amps on independent board.

All as per item No 1 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board complete all as specified and as directed.

S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.

S&F MCB single pole 5-40 Amps, 230V complete all as specified.

S&F MCB SPN 40Amps, 230V complete all as specified.

Supply and fixing Surface and wall mounted LED tube light fitting, 1X20 W, decorative box type with driver, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing Surface and wall mounted mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

Supply and fix Decorative ECO bulkhead luminaire capacity 12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified.

S&F LED building security light fitting 25W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed. Make :Havells ;- Catpart No -ENDURAPEARLSL25WLED757SASYTOPCMP and equivelent in Crompton /Jagur

S&F MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm,2 core nominal cross section in service connections complete all as specified.

Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

S&F Surface and wall mounted LED tube light fitting, 20 W, batten type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. Make : C&S Nakshatra/20W

S&F for submain wiring alongwith earth wire with 2x6.00 sqmm+1x 6.0 sq mm earth wire of FRLSH PVC insulated copper conductor, single core cable in surface/recessed in PVC conduit as required complete all as specified.

S&F for digital 2 AC digital Timer switch latest micro controller based techonolgy with LCD display suitable for Split Air condn 1.5 Ton with auto /manual facility and 1 to 24 Hours programmable timers with all connected accessories and suitable wiring between two AC to timer switch complete all as specified and directed.

S&F for Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2.of capacity 1.5 Ton complete with all fitting accessories all as specified and directed.

Supply and laying oc common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified and as directed

Supply and laying in trenches clean river sand including spreading, levelling, cushioning for underground cables all as specified and as directed

M&L for XLPE insulated, armoured heavy duty electrical cable with aluminium conductor, 1100 volts gradeof size 3.5core, 70 Sqmm laying in trench, on pole, on wall , on ceiling etc., complete all as specified and as directed Note: Earthwork including excavation, returning, filling,removing,sand cushioning,brick covering for machanical protection of cable etc will be measured and paid separetely under respective items of schedule

M&L for XLPE insulated, armoured heavy duty electrical cable with aluminium conductor, 1100 volts gradeof size 3.5core, 35sqmm laying in trench, on pole, on wall , on ceiing etc., complete all as specified and as directed Note: Earthwork including excavation, returning, filling,removing,sand cushioning,brick covering for machanical protection of cable etc will be measured and paid separetely under respective items of schedule

M&L for GI tubing light grade for cable protection laid in treches in road crossing or laid in floor/fixed to wall/pole of size 50mm dia complete all as specified and as directed

M&L for MCCB 100 amp, 3 pole 415 valts, 3 phase, 50 hz AC fixed type & should have Ics=75% Icu for short circuit breaking capacity of minimum 16 KA at 415 volts AC. The MCCBs shall be fixed in blank space of existing out door type LT pane l withsuitable aluminium busbar complete all as specified and as directed

S&F of change over switch 4 pole 415 volts on load type having capacity 100 Amps with sheet metal enclosure suitable for indoor use in and including suitable clamps/hold fasting for mouunting on wall complete all as specified and as directed

M&L for XLPE insulated, armoured heavy duty electrical cable with aluminium conductor, 1100 volts gradeof size 3.5core, 185sqmm laying in trench, on pole, on wall , on ceiing etc., complete all as specified and as directed Note: Earthwork including excavation, returning, filling,removing,sand cushioning,brick covering for machanical protection of cable etc will be measured and paid separetely under respective items of schedule

M&L Plain cement concrete 1:3:6 (20mm graded aggregate), type C1 for protection of UG cable passing through pipe laid in road crossing complete all a specified and as directed

M&L for GI tubing light grade for cable protection laid in treches in road crossing or laid in floor/fixed to wall/pole of size 80mm dia complete all as specified and as directed

S&F of change over switch 4 pole 415 volts on load type having capacity 200 Amps with sheet metal enclosure suitable for indoor use in and including suitable clamps/hold fasting for mouunting on wall complete all as specified and as directed

Supply and laying/fixing in replacement of UPVC pipes of sizes 50mm bore (inner dia), grade SCH-80 with ISI mak HSN code 3917 including all fitting and fixtures all a specified and as directed Make: Ashirvad

All as per item No. 01 above but sizes 25mm bore inner dia

Supply and laying/fixing in replacement of UPVC ball valves size 50mm bore (inner dia), grade SCH-80 with ISI mak HSN code 3917 including all fitting and fixtures all a specified and as directed Make: Ashirvad

Supply and laying/fixing in replacement of UPVC ball valves size 25mm bore (inner dia), grade SCH-80 with ISI mak HSN code 3917 including all fitting and fixtures all a specified and as directed Make: Ashirvad

M/s Omm Muruga Enterprises