SPECIAL REPAIR OF OR MD ACCN BLDG NO P-91/13 TO P-91/16 WITH 08 GARAGE AT SMS ENCLAVE AND PROVN OF INTERLOCKING TILES FOR PARKING WITH OVERHEAD GI SHEET SHED AT CANNON OFFRS MESS AT NEW CANTT PRAYAGRAJ

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick or stone walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for 5 mm thick rendering in cement mortar (1:3), finished even and fair without using extra cement on brick or concrete surfaces of ceiling complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only liquid water proofing compound ISI marked complete all as specified and directed

M&L for 1 mm thick wall care putty on internal wall over old/new plastered/ unplastered or newly plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper including cleaning of entire surface complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surafces of wall and applying two coats of water based preimum acrylic smooth exterior emulsion of approved colour complete all as specified and directed

M&L for preparation of old plastered surafces of wall and applying two coats of water based preimum acrylic smooth exterior emulsion of approved colour complete all as specified and directed

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finish concrete complete all as specified and as directed.

M&L vitrified ceramic coloured tiles of 8 to 10mm thick area of each tile not exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed

M&L for vitrified ceramic coloured tiles 8 to 10 mm thick polished (square/ rectangular) area of each tile not exc 0.36 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M&L joint free non skid, ceramic “coloured” digital tiles 7 to 8mm thick area of each tile exceeding 0.06 and n.exc 0.11 Sqm in floor etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed

M&L for Glazed ceramic coloured tiles 300 mm x 450 mm x 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M & L Marble work Udaipur Green or any approved colour 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick rendering in CM 1:4 complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and directed

Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc., complete all as specified and directed

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball (of minium weight 210 gms) etc complete all as specified and as directed.

S&F 5mm thick looking mirror with bevelled edges including suitable SS studs complete all as specified and directed

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and directed

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed

Taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc.complete all as specified and directed

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 25mm bore with all fittings, fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed

M & L for Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified and directed

S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket and cutting for and pinning in ends brackets or erecting stand, 32mm waste pipe fitting etc complete all as specified and directed.

S&F in repair (Swan neck type) Pillar taps 15mm dia, cast copper alloy, with capstan heads, fancy type, chromium plated, quarter turn, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/ 40mm-60gms of 32mm dia for WHB complete all as specified and directed

S&F in repair 25mm dia stainless steel pipe as in curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.

S&F in repair CP angle valve 15 mm bore, fancy type cromimum plated with long shank and cup, high pressure crutch or butter fly handle, quarter turn screwed both ends screwed for iron pipe or for unions (weight of each should not be less than 0.40kg) complete all as specified and directed.

S&F in repair CP Stop valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle, quarter turn screwed both ends screwed for iron pipe or for unions (weight of each should not be less than 0.40kg) complete all as specified and directed.

S&F in repair china wash down water closet pan (pedestal pattern) white trap including plastic water closet seat cover white/coloured with flat bottom and mild steel chromium plated or aluminised hinging device, connection to drain (or outgoing pipe) pipe and flushing pipe , anti symphonage pipe, etc complete including making good to the floor complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed. Make: Commander/ Slimline/ Waterbird

S&F in repair two way angle valves /bib tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair for grating doom 100 mm dia of SS with/without waste hole (Minimum weight 25gms) complete all as specified and directed

S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, chromium plated, long body with capstan head and cup screwed down, complete all as specified and directed.

S&F in repair ABS body chrome plated shower rose 125 mm size Square or round , shower Arm with swivel joints complete all as specified and directed.

S&F in repair Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.

S&F in repair SS towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Soap dish, stainless steel, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair PVC (SWR) floor trap plain with grating with waste hole including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S & F in repair stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed

Supply and applying for component elastomeric acrylic polymer modified cementitious water proofing coating smart care damp block 2K Suprema of Asian make in 2 coats over the prepared surfaces (wall/ sunken floors) at a coverage of 1.5 Kg/Sqm. The coating shall have 80% elongation as ASTM D412 resisting 5 Bars hydro static pressure as per D1N 1048 reduction to rapid chlorides shall be 70 as per D1N 1048, crack bridging upto 1.2m as per ASTM 45485. The coating have food grade certificate from laboratories like CFTRI. The max ratio of coating shall be 2 Part of powder & 1 part of liquid within any water addition in the mixing etc complete as per manufacturer specifications. (i) After the surface dried, plaster the surface with CM 1:4 15mm thick. Note: All water proofing treatment will be executed by the authoised representative of Asian Paints

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying. PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Description same all as per serial item No 59 here-in-above but of Frame size 65 x 125 mm complete all as specified & directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and taples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in bed blocks for hold fast complete all as specified & directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or grith not other wise described complete all as specified and directed

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F for 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

S&F for 200 mm long Stainless steel tower bolt complete all as specified and directed

S&F for 150mm long stainless steel handle complete fixed with steel screws complete all as specified and directed

S&F for 300 mm long stainless steel sliding door bolt plate type with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed complete all as specified and directed

S&F for 100mm size stainless steel butt hinges for doors complete all as specified and directed.

S&F for SS 150mm Floor door stopper with hard drawn steel spring, fixed in floor complete all as specified & directed

Supply and fixing factory made uPVC any approved colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window not exceeding 2.0 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note -1. Glazed shutters float glass thickness not less than 5.00 mm and wiremes shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F casement windows with net & grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash million having 50X64X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50X85X2.5mm UPVC section reinforced and welded in corners with EDPM gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. Mosquito mesh shutter is made out of UPVC extruded section of 61X27X2mm with GI channel of 1.2mm thick, welded in corners. Mosquito net of GI is filled in shutter with proper required accessories like hinges,MS grill of 12mm square MS bar are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and directed. (Note: glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately)

S & F UPVC ventiliators made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash mullion having 50X75X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 60X75X2.5mm UPVC section reinforced and welded in corners with TPE gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. with MS grill of 12mm thick round shape are fabricated as per manufacturer and installed in UPVC frame section of 35X35X2mm by drilling and surveying system complete all as specfied and directed. (Note: glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately)

S&F/fabrication in repair 18 mm thick PVC sheet grade 1 quality one side decorative lamination and other side plain white colour to make kitchen cabinet/drawer/cupboard shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions to make drawer/cupboard racks/shutters/ shelves etc complete all as specified and directed. Note:- (a) Accessories like handle, hinges etc will be measured and paid separately. (b) Colour and design of prelaminated board shall be approved by Engr-in-Charge

S & F in repair 40mm width (when open) stainless steel continuous (piano) hinges chrome finish complete all as specified and directed.

S&F 100 mm long stainless steel handle fancy type polished bright chrome finish complete all as specified and directed.

S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws fixed to shutter complete

S&F in repair Galvanised mild steel wire cloth.0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified & directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, hollow sections, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete as specified and directed

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering complete all as specified and directed

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 all as specified and directed.

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., complete as per Manufacturer's specifications

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

M/L RCC 1:2:4 type B1 (using 20 mm graded aggrigate)as in slab,beam etc complete all as specified and directed

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed

M&L 8 to 10mm dia and over TMT bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and directed

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

S & F in repair stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed

S&F in repair PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed

PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, complete all as specified and directed

PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, complete all as specified and directed

S&F PVC(SWR) 110mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed

S&F PVC(SWR) 75mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed

M&L in repair PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed

Demolition of Stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M &L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation ,filling and mass concrete complete all as specified and directed

M&L for heavy duty pavement tiles 400mmX400mmX10mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tile 300mm X300mmX 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified and directed

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block (yellow, red or both in combination) any shape and size conforming to IS 15658-2006 with grey cement and no pigment complete all as specified and directed.

M&L for 50mm sand cushion for paver blocks complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping on edges of tiles, rounded or chamfered on edges complete all as specified and directed.

M & L for cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

M&L Fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed

M&L Fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. (Exceeding 30cm) complete all as specified and directed

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

M&L Removing excavated material n exc. 500m and depositing where directed at a level n exc. 1.5 Km above the starting point complete all as specified and directed

M&L Providing precast cement concrete in landings, perforated cover slabs (for man holes etc.) Type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed

S&F Mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Excn in post holes ( or similar holes) in soft / disintegrated rock each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n.exc 50 M complete all as specified.

S&F steel work in tubular trusses, Rafters and purlins including special shaped washer etc. complete using washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-290 (Gde E-165) complete etc all as specified and directed

S&F Tie bars with screwed ends, nuts, washers and mild steel plates for walls, sheets, chimneys, roofs, arches, etc. king rods and staining bolts conforming to Fe 290 Gde-E--165 dia complete all as specified.

100 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in sub base flooring complete all as specified & directed.

40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

Surface excavation in soft / loose soil n.exc 30cm deep and averaging 15 cm deep and getting out including cutting to required gradient and camber as for formation of roads or berms complete all as specified.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 80mm thick M-35 grade factory made cement concrete coloured interlocking paver block (yellow, red or both in combination) any shape and size conforming to IS 15658-2006 with grey cement and no pigment complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed

M&L for point wiring with concealed in wall 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit complete all as specified and directed Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

Description same all as per serial item No 132 here-in-above but for 3 pin 5 Amps switch socket on independent board with 2.5 sq mm copper cable complete all as specified and directed

Description same all as per serial item No 132 here-in-above but for 3 pin 15 Amps switch socket on independent board with 2.5 sq mm copper cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Description same all as per serial item No 132 here-in-abovebut for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Description same all as per serial item No 132 here-in-above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed

Description same all as per serial item No 132 here-in-above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed

S&F for modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F for modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F for modular switch 2 way, 6 amps, 230V AC, one way complete all as specified and directed

S&F for modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified and directed

S&F for call bell Dingdong type AC 230 Volts single pole complete all as specified and directed

S&F for ceiling rose surface backelite three terminals complete all as specified and directed

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

Supply & fixing LED Batten light fittings decorative ultra slim linear fixture,20 Watt, efficiancy 120 Lm/watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps all as specified and directed.Make Philips Cat No. BN170C LED 20 S -6500 PSU L1 120 or equivalent in Wipro/Bajaj as approved by GE.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make Philips Cat No. BN170C LED 10 S -6500 PSU L1 120 or equivalent in Wipro/Bajaj as approved by GE.

Supply & fixing wall mounted fitting fancy type (City -2 type) with 9 watt LED bult inverter type including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make -Cat No. City -2 type of Havells or equivalent in Wipro /Bajaj

S & F Lamp holder insulated body PVC/polycarbonate with back plate and 9 W LED bulb inverter type suitable for batten fitting complete all as specified and directed. Make. Philips/ Wipro/Bajaj

S&F on wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one all as specified and directed.all as specified. Make philips cat no.BRP030 P LED 35CWSLRGRPSUSPD or equivalent in Wipro/ Bajaj as approved by GE.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades and repair, servicing, paiting if required and after repair made serviceable condition to fix same place complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 Volts, 1200mm sweep copper wound minimum air delivery 210 CFM with service valve 6.00 BEE, Five Star rated with brushless direct current motor complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 4 pole MCCB 100Amp 25 KA - 01 fixed type Nos and SP MCB 63 Amps 'C' curve 10 KA - 12 Nos outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified.NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. Make - Legrand/L&T/ Scheinder

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP&N 8 ways ,220 volts Make - Legrand/L&T/ Scheinder Note : MCB and MCB/MCCBs shall be of same make and shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of Triple poles and neutral current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.Make - Legrand/L&T/ Scheinder

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning. Make - Legrand/L&T/ Scheinder

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical Plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion and dismantlling is old earthing complete. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including all fittings for fixing complete all as specified and directed

M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site complete all as specified and directed

Supply and fixing electric water heater, storage type steel body with inner tank and heating element upto 2 KW, BEE 5 star rated, 25 Ltrs capacity with all accessories such as safety valve, thermostate, NRV, PVC connection pipe heavy duty hot water supply (wired) - 01 No and inlet cold water pipe complete of size 600mm length - 01 No including grouting of suitable anchor nuts, bolts not less than 10mm dia and 100mm long as per site requirement and all other accessories for fixing of geyser electrically, plumbing complete all as specified and directed.

Supply, laying, jointing and testing of LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm, 3.5 core, complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed

Taking down carefully energy meter after disconnecting the electrical connection, refixing or replacement the energy meter in same position including all electrical connection and material and labour complete all as specified and directed

Schedule of Credit (MINUS) Rs. 88,127.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum