CONSTRUCTION OF STORE ROOM ,VEHICLE PARKING SHED, SPECIAL REPAIR TO BLDG NO. T-41 AND P-9 UNDER GE SATWARI

Amount

Demolition of unreinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr complete as specified.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified.

Demolition of cement concrete (reinforced) ground floor to 4th floors and pavings n exc 15 cm thickness below or above ground level (reinforcement cut as per site requirement) and removing unserviceable material exc 100 mtr complete all as specified.

Taking down cement plaster of any description on brick wall including racking out joints, hacking for key, scrubbing down with water and removing all the demolished material outside cantt area complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the cantt area complete all as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm, all as specified

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20mm, all as specified

Taking down CI/PVC pipes 100/110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Dismantling of RCC/ PVC water tanks of exe 500 ltrs but not exe 1000 ltr and removing the debris all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing all the demolished material outside Cantt area complete all as specified.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,cables,pipe line,pole etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and as directed by Engineer-In-Charge.

Excavating in Post holes (or similar holes) each n.exc 0.5m Cum, getting out returning ,filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.

Earth filling under floor or in foundation including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials/ soils, to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials/ soils, to a distance exceeding 250mtrs but not exceeding 500 mtr and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc.),of bore 15mm, all as specified .

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc.),of bore 20mm, all as specified .

Supply and fixing GI tubes medium grade bore of pipe 15mm fixed to wall or laid in floors etc with all fittings complete all as specified and directed.

Supply and fixing GI tubes medium grade bore of pipe 20 mm fixed to wall or laid in floors etc with all fittings complete all as specified and directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.and brushing surface with neat cement slurry with 3.0kg of cement per sq. metreremoving serviceable tiles to store and rubbish off the cantt area complete all as directed.

Plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as in subbase, mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for ATT treating in contact with foundation at the rate of 5 ltrs of emulsion per sqm of vertical surface area

Material and labour for ATT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

Material and labour for ATT treating the top surfaces of filled earth at the rate of 5 ltrs of emulsion per sqm of surface area

Supply and spreading dry sand cushioning to cable providing with a layer of sand 8cm deep before laying the cable and 15cm deep after laying and stretching the cable in trenches complete all as specified in SSR part-I.

Material and labour RCC (Design Mix) M-25 as in in slabs supported on walls beams and clumns in floors, roofs, landings, balcony, canopies, deck slabs and in slaves and like..

Material and labour RCC (Design Mix) M-25 as in chajjas fins, facias,etc completed all as specified as directed

Supply & laying dry bricks over cable as mechanical protection with width equal to length of brick with Sub-Class 'B' bricks complete all as specified in SSR patr-I.

Material and labour for brick work in cement mortar 1:6 using sub-class B bricks straight or curved on plan exc 6m mean radius all as specified.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan any radius half brick thick wall built in CM (1:4) complete all as directed.

Material and labour for repairing of concrete surfaces such as chajjas,upward facia,downward facias,ceiling and similar items with plain cement concret 1:2:4 type B-0 or rendering 10mm thick in CM 1:3 includind dubbing coat without using extra cement finished even and fair including necessory formwork and scaffolding complete all as specified and directed.(Up to fourth storey bldg)

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15 mm thick, on brick or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and fair without using extra cement including mixing of water proofing compound, complete all as specified and as directed by Engineer-In-Charge. Note :-- WPC shall be measured and paid separately

Material and labour for rendering 15 mm thick in CM 1:3 on fair faces of concrete surfaces in sunken floors finished even and smooth without using extra cement all as specified including mixing of water proofing compound complete all as specified and directed. (Water proofing compound shall be measured and paid separately)

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately

M&L for 25 mm thick PCC (1:2:4) type B-O (Using 12.50mm graded stone aggregate) as in floor etc complete.

Supply only water proofing compound liquid.

Plain cement concrete M-15(1:2:4), type B-I (using 20 mm graded crushed stone aggregate), nominal mix, 50 mm thick, as in floors, finished even and fair complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete 1:5:10, type E-2 (using 40mm graded crushed stone aggregate), as in sub base of floor ( upto 4th floor) mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, basement slabs, bases for columns etc under reamed piles and mass concrete complete all as specified.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in columns,pillars,piers,posts and struts etc complete all as specified.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and as directed by Engineer-In-Charge.

Material and labour for PCC 1:2:4 25mm thick type B-1 using 20 mm crushed stone aggregated as in floor finished even and rough all as per specified and directed.

Rendering 5 mm thick on concrete surface as in columns, RCC walls, fins etc in CM 1:4 finished even and smooth without using extra cement.

Material and labour for plain cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary form work complete all as specified and as directed.

Pre-cast reinforced cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs and similar articles with plain faces as specified in clause No- 4.11.16 of SSR Part-I (2009), set in cement mortar 1:4, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), 75mm thick, as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all as specified and as directed by Engineer-In-Charge

Material and labour Plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in roof padding mass concrete and similar work complete all as directed by Engr-in-charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight)

Material and labour for RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns complete all as directed

Material and labour for RCC (Design Mix) M-25 as in columns, pillars, peris, posts and struts etc complete all as directed.

Material and labour for RCC (Design Mix) M-25 as in in beams , cantilevers, bressummers, lintel over 1.5 m span complete all as directed

Supplying, laying, jointing & testing galvanised steel tubing 150 mm bore medium grade with screwed joint together with all fitting such as bends, elbows,tees,short pieces and union etc laid in trenches including all fittings complete all as specified and directed. Make:- Prakash surya/TATA/Jindal.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

Material and labour for hardcore of broken stone of gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick watered and well rammed to a true surface, complete all as specified and directed

Supply and fixing in repair cast iron,100 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors.

Supply and fixing in repair cast iron,75 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors.

Supply and fixing in repair cast iron,50 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors.

Supply and fixing in repair 75 mm cast iron branch pieces, double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed

Supply and fixing in repair 50 mm cast iron cowls complete all as specified and directed

Supply and fixing in repair CI Reducer 100 to 50 mm internal bore, sand cast type complete all as specified.

Supply and fixing in repair cast iron Bends, 100 mm bore, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fixing in repair, 100 mm bore, Branch pieces, single Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches , including oval access door complete all as specified and directed.

Supply and fixing in repair cast iron Bends, 75 mm bore, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Supply and fixing tubes, 'heavy grade' galvanised, 40 mm bore, ISI marked and fixed complete to walls and ceilings or laid in floors as spout pipe in sunken floors, complete all as specified and as directed by Engineer-In-Charge.

Machine pressed precast concrete interlocking paver block coloured with glazed finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade (with grey cement and pigment) laid dry over and including sand cushion of average thickness 25 mm duly consolidated,set and levelled complete all as specified and as directed by Engineer-In-Charge.

S&F for steel truss in tubular trusses including special type of washer and using ERW washer or induction butt welded mild steel tubes conforming to IS : 1161 - 1988 grade St - 240 etc complete and all as specified and as directed

S&F for Rolled mild steel sections conforming to Fe 410-W (Gde -E- 250) quality - A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for fixing with angle cleats or other connecting plates etc complete and all as specified and as directed

Material and labour for machine cut kota stone slab 10mm to 12 mm thick as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete over and including 10mm thick rendering in cement mortar 1:4 all as directed by Engineer-in-Charge

Material and labour for Kota stone slab 18-20mm thick and single piece slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with & including 15mm thick screed bed in CM 1:4 to match the existing finish of Kota stone complete all as directed by Engineer-in-Charge.

Material and labour for Green marble (of any type) work 18 to 20mm thick(table rubbed and polished) in cooking plate forms and like in single piece fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble with & including 15mm thick screed bed in CM 1:6 including rubbing and polishing visible edge of plate form complete all as directed by Engineer-in-Charge.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete

M & L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 20 mm screed bed layed with CM 1 :4 etc complete. Note:- Kota Stone used in steps of staircase should be in single piece

M & L Machine cut kota stone slab in skirting/rises/ in steps 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete including 10 mm thick rough plastering with CM 1 :6 etc complete. Note:- Kota Stone used in steps of staircase should be in single piece

Machine cut kota stone 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, , set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/ colour of tiles over and including 10mm thick rendering in cement mortar 1:4, as in verticle surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to sides of pillars, posts, struts, pier, column square, rectangular or polygonal rough finished surface of concrete

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves etc with fair finished surface of concrete.

Use and waste of formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter,for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete rail­ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon­tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed by Engineer-In-Charge.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges complete for flat and fair finished surfaces all as specified and directed by Engineer-in-Charge.

TMT bars 10 mm and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.

TMT bars06 to 08 mm and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.

Description all as per item No 93 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and builders.

Material and labour Non - skid Ceramic coloured joint less tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed CM 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

Material and labour Non - skid Ceramic coloured joint less tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick screed bed CM 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

Material and labour Non - skid Ceramic coloured joint less tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed CM 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

Material and labour for digital glazed ceramic tile 450mm x 300mm x 7mm thick on vertical surface as in skirting/dado etc set and jointed with neat cement slurry and pointed with white or color cement mixed with colour to match the surface over and including 10 mm thick CM 1:4complete all as specified and directed.

Material and labour glazed ceramic coloured tiles in vertical surface 300x200x6 mm thick set and jointed in neat cement slurry and pointed in colour cement to match the surface over and including 10 mm thick CM 1:4 all as specified.

M&L Cement concrete designer coloured tiles 30 cmx 30 cm x 20 mm thick mixed with grey cement and pigment machine pressed, set jointed and pointed in coloured neat cement slurry in floor, and cut and polishe d with grey cement and pigment over and including 15 mm thick screed bed layer of cement in CM 1:6 complete all as required and as directed.

Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32mm dia, waste coupling of PTMT (half or full threaded), and PVC connection 15 mm dia 450 mm long complete all as specified and as directed by Engineer-In-Charge..Make : Cera,Essco,Hindware ( sample as approved & kept in GE's sample room)

S & F in repair vitreous china corner wash basin of size 400 mm x 400 mm x125mm white colour fixed with wall including 32mm dia brass waste coupling complete Make Prayag Cat Part No 4655 or equivalent in cera, hindware etc

Preparation of new or old plastered surfaces of walls and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered surfaces of walls and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered surfaces of ceiling and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old plastered surfaces of ceiling and applying one coat of white washing, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for preparation of new plastered surfaces of walls, and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

Material and labour preparation of new plastered surface and applying two Apex weather coat paint on wall etc. complete all as specified and directed.

Cutting chases, pinning in. making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer-In-Charge.

Material and labour for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 2 to 3 mm thick and one coat of primer complete all as specified.

Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coats of oil emulsion distemper over a coat of wall putty on walls, pillars, cornices surface including making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required. etc. complete all as specified and directed.

Identifying and marking carefully the damaged reinforced concrete by tappering with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 25mm average depth including saw-cutting of all edges making square shoulders of the cavities including complete all as specified and as directed. (All loose unsound and cracked concrete shall be removed out side MD land)

Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia complete all as specified and as directed. (Note: Epoxy based passivating, protecting & bonding coat of zinc rich system shall be paid for separately).

Supply only epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ BASF as approved by the Engineer-in-Charge (Note: Payment shall be made for the total weight of resin and hardener in manufactured specified proportion)

Mixing and applying SBR latex modified cement mortar 25 mm thick in cement sand mortar in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note: Acrylic polymer shall be paid for separately)

S&F in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new surface over 10cm width or girth complete all as directed by Engr-in-Charge

Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of wall, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots,rubbing with sand paper and applying one coat of cement base paint complete all as specified and directed.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surface complete all as specified ooth complete all as specified and directed.

Material and labour for Vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest with 'P' or 'S' trap (excluding flushing cistern and flush pipe) and provision of lime concrete and making good floor, all as specified.

Supply and fixing 10 litres capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe 32mm bore as required and a pair of bracket etc complete all as specified

Vitreous China Half stall urinal flat back, size of 465x355x265mm white colour (minimum), with grating and union for discharge pipe (excluding flushing cistern and flush pipe but including of waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe grating and union for discharge pipe, fixing in repair, complete all as specified and as directed by Engineer-In-Charge.Make : Cera,Essco,Hindware ( sample as approved & kept in GE's sample room)

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm bore pipe, including making connections complete all as specified. and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s

Supplied and fixing fixed in repairs steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

Supplied and fixing fixed in repairs steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded.

Material & labour flush shutters,factory made both side commercial face door shutter 35 mm thick solid core construction, with ply board core complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels, particle board commercial type on both sides.

M&L for Glass dividing strips, 3 mm thick 38 mm wide inserted in position confirm to design.complete all as specified

S & F in repairs corner Glass shelf with bracket all as specified and directed by Engr -in- charge

Supply and fixing cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 diameter of outlet pipe 75mm, complete all as specified

Supply and fixing 75mm dia PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good complete all as specified and directed.

Rotational moulded polyethylene water storage tanks of 1000 liters capacity,triple layered white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, complete all as specified and as directed by Engineer-in-Charge.

Rotational moulded polyethylene water storage tanks of 500 liters capacity,triple layered white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm).

Supply and fixing in repair Gun-metal, globe or gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified. ( ISI Marked)

Supply and fixing in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

Supply and fixing in repair Soap dish holder complete all as specified.

Supply and fixing plate racks made of stainless steel l mm thick including fixing cantilever brackets overall size 750mm x 750mm x 250mm complete all as specified and directed by Engineer-in-charge. Make: Prayag, CERA,Nirali, Jayna

Health faucets fancy type chromium plated hand shower with 8 mm dia 1 mtr long flexible tube and wall hook fixed to walls with chromium plated brass screws, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing prepainted galvatume aluminium zinc coating GI based, corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550Mpa as roof covering/cladding, walls, fixed with self tapping screws complete all as specified. Make : Jindal( JSW),Tata.

Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

Supply and fixing in repair mild steel helical/ordinary rat tail rod pattern door spring 225 mm including roller and roller plate complete fixed with welding all as specified.

Supply and fixing Pressed steel frame (factory made) of size 125x60mm for doors with double rebated including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc., complete as specified, supplied and fixed including back filling of chowkats in PCC 1:3:6 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spd and as directed.

Supply and fixing Pressed steel frame(factory made) of size105x60mm for doors with single rebated including mild steel hinge medium weight 100 mm long and 25x3 mm flat iron in holdfast , tie bar all necessary fixing arrangement complete including back filling of chowkats in PCC 1:3:6 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spd and as directed.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung including pintle hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Material & labour factory made steel ventilators double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung including pintle hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing 35mm thick 2nd class Hardwood factory made rail and style plain framed, panelled shutter (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as directed.

S&F locally fabricated 35 mm thick IInd class HW partly paneled& Partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

Material & labour 35mm thick 2nd Class hard wood factory made glazed, gauzed and Skelton shutters open rebated and prepare to receive glass but divided into square with plain chamfered or rounded mitred and rebated sash bars stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a)

Material & labour 30mm thick 2nd Class hard wood glazed,gauzed and skelton windows, ventilators shutters etc provided with stiles and rails open rebeated and prepare to recive glass but dived into square with plain chamfered or rounded mitred and rebeated into ash bars stiles and rails as specified in SSR Pt-I Sec 8 clause 8.24 (b) etc complete all as specified and as directed

M&L for Rendering 15mm thck in CM 1:4 mixed with integral WPA on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPA shall be measured seperately) and thanApplying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3 Kg/Sqm over a coat of bitumen membrane 0.4ltr/sqm by the same membrane manufactured of density at 25 degree C’ 0.87-0.89Kg/Liter and viscosity 70-160 CPS, applying a coat of bitumen primer 85/25 grade @ 1.2 Kg/Sqm of surface and then laying APP membrane using butane torch with 10cm over laps which shall be thermo fused by flame and over the APP membrane and than Applying a coat of bitumen 85/25 @ 1.2 Kg/Sqm over the APP membrane. appling a coat of aluminium paint complete all as specified. MAKE-IWL/Pidilite

Supply and fixing anodised powder coated (not less that 50 micron) aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fixing Powder coated anodised aluminium ventilator shutters, for sliding/side hung/window without sash bar including three track channel, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and recessed handle etc including locking arrangement (Thickness of powder coating not less than 50 micron) complete all as specified.

M&L for fixed in repair 6mm thick Non asbestos fibre cement building board fixed or laid on GI framework in ceiling etc complete all as specified and directed by Engr-in-Charge.

S & F anodised aluminium snap grid (size of grid 605X605mm) frame work for false ceiling and hangers 6mm dia GI (upto 1200mm length) adjustting level fixed to roof slabs by means of celling cleats made out of GI flat 40X 3mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long complete all as specified and directed.

Supply and fixing for anodised aluminium grills, 6mm dia size 100X 100mm mess fixed to aluminium windows powder coating not less than 50 micron) complete all as specified.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balasters walk ways, railing, frame work for water tanks and similar work conforming to Fe 410 all as specified. Note : Grill will be made as per sample kept in sub division office.

Supply and fixing galvanized mild steel wire cloth of 0.45mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tack or galvanized wire staples complete all as directed.

Supply and fixing galvanized stainless steel wire cloth of 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tack or galvanized wire staples complete all as directed.

Material & labour 3mm thick sheet glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane complete all as specified. (Make Saint Gobin)

Material & labour 4.8mm thick sheet glass ordinary quality and glazing with beads in square area n.exc 0.5 sqm each pane complete all as specified. (Make Saint Gobin)

Supply and fixing 4 mm thick figured glass, pin head type and glazing with oil putty in square exc 0.5 sqm in each pane. Make:Saint Gobain

Supply and fixing 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 for PVC door, complete

Supply and fixing butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

Supply and fixing butt hinges of mild steel cold rolled medium weight of size 75mm as specified.

Supply and fixing butt hinges of mild steel cold rolled medium weight of size 50mm as specified.

Aluminium anodised, barrel tower bolts of extruded Section, size 100 mm long and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 150 mm long and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 200 mm long and fixed, complete all as specified and as directed by Engineer-In-Charge.

S&F plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) with riveted,bolted or welded attachment etc complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing bracket made out of MS iron tubing medium grade 32mm bore including bending & provision of two nos clamps fabricated out of 40X4mm flat iron including nut bolts ,length of pipe not less than 1.2m for fixing on PCC and steel tubular poles.

Supply and fixing for mild steel as in main and cross beam, hip and jack rafters, purlins, plates (plain or chequered), channels, square cut or notched etc where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of FE410-W (Gde E-250).

S & F mild steel work as in hold fast and stack clamp etc made out of flat iron 25 mm x 3 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed.

Supply and fixing for hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts; clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-410-0 Gde-E-310-0.

Aluminium handles, cast type, anodised, size 150 mm, complete all as specified and as directed by Engineer-In-Charge.

Aluminium handles, cast type, anodised, size 100 mm, complete all as specified and as directed by Engineer-In-Charge.

Aluminium handles, cast type, anodised, size 125 mm, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of size 250mm long.(ISI marked)

Supply and fixing 250mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off Rendering 15mm thck in CM 1:4 mixed with integral WPA on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPA shall be measured seperately) and thanApplying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3 Kg/Sqm over a coat of bitumen membrane 0.4ltr/sqm by the same membrane manufactured of density at 25 degree C’ 0.87-0.89Kg/Liter and viscosity 70-160 CPS, applying a coat of bitumen primer 85/25 grade @ 1.2 Kg/Sqm of surface and then laying APP membrane using butane torch with 10cm over laps which shall be thermo fused by flame and over the APP membrane and than Applying a coat of bitumen 85/25 @ 1.2 Kg/Sqm over the APP membrane. appling a coat of aluminium paint complete all as specified. MAKE-IWL/Pidilite

Material and labour applying a coat of bituminous primer conforming to IS-3384 @ 0.3 ltr sqm on prepared surface of roof/sunken slab after drying of primer apply a coat of hot blown 82/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface. Provide polymeric water proofing membrane ISI marked of 5 layered with centre core as 90 micron high density polythelelene film with minimum weight of 3 KG per sqm and minimum thickness 3 mm, both on floor as well as on wall of sunken slab portion.

Material and labour for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Material and labour for reinforced cement concrete M-25 (Design Mix) as in fins, facias, louvers, parapet and railing exc 60cm ht. newals, balustrade & the like.

Material and labour 75mm thick PCC 1:2:4 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and as directed by Engineer-In-Charge.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair for 15mm bore pipe,complete all as specified and as directed by Engineer-In-Charge.

Stop valves, concealed type,cast copper alloy,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed by Engineer-In-Charge.

Stop valves, concealed type,cast copper alloy,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed in repair for 15mm bore pipe, complete all as specified and as directed by Engineer-In-Charge.

Tubular towel rail, 20mm dia, D type, 60cm long between flanges, chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) pipes, 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) bends of 75 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) bends of 110 mm bore, any radius, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing PVC(SWR) junction single 'T' equal or unequal for 75mm bore (ISI Marked)

Supply and fixing 110 mm bore PVC (SWR) Type B vent cowl complete all as directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement for bore of pipe 75 mm dia complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing In repair brass chromium plated shower rose 125 mm size swivel type with 15mm bore connecting rod 250mm long complete.

Supply and fixing Sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory (ISI Marked) with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mm x 330mm x 160mm including 40mm waste CP coupling, complete all as specified.

Angle cock with wall flange,cast copper alloy, chromium plated, fancy type, with with capstan head handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.

S&F in repair fancy type health foucet with 1 mtr tube & hook (Braded tube) Make:- ESSCO something special series complete all as specified and directed .

S&F in repair PVC corrugated waste pipe 32mmx 800mm long complete all as specified and as directed by Engineer-In-Charge.

S&F in repair PVC corrugated waste pipe 40mmx 800mm long complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs PVC Grating Square 150mm complete all as specified and as directed by Engineer-In-Charge.

S&F 75 mm PVC (SWR) branch piece double(double Y) eaual or unequal etc complete all as specified

S&F 110mm PVC (SWR) branch piece double(double Y) eaual or unequal etc complete all as specified

Supply and fixing in repairs fancy type bib taps, cast copper alloy with capstan head handle, screwed down, screwed for iron pipe of 15mm bore including necessary fittings complete all as directed.

M&L 9 mm thick toughened hard glass of approved quality as in partition with complete fixing accessories fixed to aluminium/ Stainless Steel frame/wall and floors complete as per directed by Engr-in-Charge/GE. Note:- Make & sample as per approved by Engr-in-Charge/GE.

M&L 9 mm thick toughened hard glass of approved quality as sliding/openable door shutter with complete fixing accessories as per directed by Engr-in-Charge/GE. ( ingluding all accessories like PVC shower door seal, Door handel, rail & roller, hinges, etc) Note:- Make & sample as per approved by Engr-in-Charge/GE.

S&F in repair Chromium plated Wall Mixer with Telephone Shower Arrangement, Connecting Legs & Wall Flanges but without Crutch & Telephone Shower complete all as specified. Make:- Jaquar. Cat Part No- CQT-23217UPR or equivalent in Hindware, Cera

S&F in repair Hand Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified. Make:- Jaquar, Cat Part No- HSH-1721 or equivalent in Hindware, Cera

Supply and fixing in repair Overhead Shower 105mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Systemr, complete all as specified. Make :- Jaquar, Cat No- OHS-CHR-1719 or equivalent in Hindware, Cera

S&F in repair CP Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and directed by Engr-in-charge. Make:- Jaquar, Cat Part No- CQT-23167B or equivalent in Hindware, Cera

S&F in repair CP Angular Stop Cock suitable for 15 GI pipe complete all as specified. Make:- Jaguar, Cat Part No- CQT-23053 or equivalent in Hindware, Cera

S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple complete all as specified. Make:- Jaquar, Cat Part No- ALD-805B or equivalent in Hindware, Cera

S&F in repair CP Bib Cock With Wall Flange complete all as specified. Make:- Jaquar, Cat Part No- CQT-23047 or equivalent in Hindware, Cera

Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .Make: Prayag Cat No 3271,Hindware,Somany,CERA,Jaquar

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs to the existing surface & finish complete all as specified and as directed.

Taking down of unsv MCB DB SPN along with MCB's

Taking down of unsv ceiling fan and depositing the same in the MES store yard

M&L for complete for point wiring One light/fan point controlled by one way switch 6 Amps with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm stranded copper conductor flexible FRLSH insulated drawn in existing concealed PVC/MS rigid conduit of any size terminated in exisitng CI/pressed steel terminal boxes including 3.00 mm thick hylam marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised suitable size sunken boxes incl white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.Make of wire: Havells/Polycab.

Description all as per srl item No 225 but one 3 pin socket outlet 6 amp independent board.

Description all as per srl item No 225 but one 3 pin socket outlet 6 amp on same board.

Description all as per srl item No 225 but one bell/ buzzer point controlled by one switch, complete all as specified and directed.

Description all as per srl item No 225 above but for one 2 way light point controlled by two 2 way switch

Description all as per srl item No 225 but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in continuous earth wire. complete all as specified and directed.

M&L for of modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

M&L for of modular type switch, two way 10 Amps , 1 module complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6 amps combined 2 module complete all as specified and directed.

Material and labour for modular type switch, one way 16 Amps 1 module complete all as specified and directed

Material and labour for modular type socket 5 pin, 6/16 amps combined 2 module complete all as specified and directed

Supply and fix fan regulator step down 120 Watt 2 Module complete all as specified and directed.

Supply and fixing Bell Push with indicator Polycarbonate material ISI marked 1 Module , 6 Amps, 240 V

Supply and fixing musical door bell, AC 230 volt single phase.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Box type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or equivalent in Havells, Jaquar alongwith LED tubeRod with heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton or equivalent in Havells, Jaquar . Note:- The LED batten and LED tube rod shall be of same make.

Supply and fixing of lamp holder, PVC /Polycarbonate type with back plate for batten fitting with LED bulb 7 Watt

Supply and fixing of LED lamp holder suitable for B22 holder of capacity 7watt

Supply and fixing switch piano flush button single pole one way 6 Amps, 240 V.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volts.

Supply and fixing MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed. Make:- IndoAsian Optipro Cat Part No 811173 or equivalent in Havells/ Legrand

Supply and fixing MCB SP complete 6 to 32 Amp with rupturing capacity 10 KA 'C' series ISI marked complete all as specified and directed. Make :Indo Asian Optipro or equivalent in Havells/ Seimens/C& S electric.

Supply and fixing Distribution Board (SPN) double door 08 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing. Makes: IndoAsian Optipro Cat Part No 811807 or or equivalent in Havells/ Legrand

Supply and fixing sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl taking down of unsv exhaust fan complete all as specified and directed. Make : Crompton/Bajaj/Havells.

Supply and fixing distribution board (TP&N) double door fitted with Bus bars neutral links blanking plates suitable for 4 pole MCB as incoming and out going MCBs 4 ways and should be IP 43 protected with Copper insulated busbar assembly, Isolated Neutral Bar, Earthig Bar, Door earthing complete all as specified and directed. Make:- Indo Asian Optipro Cat part No 811840 or equivalent in Havells/ C& S electric. Note:- MCBs shall be measured and paid separately Note : MCB & DB shall have the same make.

Supply and fixing MCB 4 pole complete 63 Amp with rupturing capacity 10KA 'C' series complete all as specified and directed. Make : Indoasian Optipro or equivalent in Havells/C&S electric.

Supply and fixing profile + flood light LED type 60 watt, IP66 with high power LED floodlight with pressure die cast aluminium housing including electronic driver 60 W LED 6000k working voltage 220-240V and as directed by Engr-in-Charge. Make : CAT PART NO LFL-60-CDL/60 of crompton or equivalent in Philips, havells.

M&L for NEXUS+45W LED aesthetic designed roadway luminiare with excellent thermal management long life versatile pressure die-cast aluminium with high power LED's as light sources incl electronic driver 45W LED 6000K. Make : LSTP 45-CDL or make of jaquar lighting/Havells.

Supply, installation, commossioning of water cooler fully stainless steel , electric driven singlr phase having apprrox storage and nominal cooling capacity of 40/80 Litres per hour.Make-Blue Star, Voltas, Hitachi.

Voltage stabilizer for automatic operation,copper wound single phase naturally air cooled indoor type & designed for input variation between 90 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA. Make-Vguard/VOLINA/AE

Material and labour PVC insulated flexible aluminium conductor cable multistand 1100 volt grade PVC sheathed of nominal area 2.50 Sqmm 2 core for making connection to light fittings complete all as specified. Make : Havelles/Finolex/Anchor.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 25Sqmm X 4 core.

Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

CELMAC REGD

M/S ANIL MAHAJAN

M/S PARAMJEET SINGH

M/S Shesh Paul Gupta