Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹39.3 L+₹90,019.50 (2.35%)Rejected-Finance 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹39.7 L+₹1.3 L (3.51%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹39.9 L+₹1.5 L (3.93%)Rejected-Finance | L4 | Rejected-Finance Awarded being 4th Lowest Bidder | |
| 5 | L5₹41.8 L+₹3.4 L (8.95%)Rejected-Finance | L5 | Rejected-Finance Awarded being 5th Lowest Bidder |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S K Yadav GE(S) BATHINDA
GE(S) BATHINDA BATHINDA MIL STN
GE(S) BTD TOKEN NO 47 OF 2022-23 PROVISION OF CERTAIN REVENUE MINOR AND LBW WORKS UNDER AGE BR II AGE BR I AND EM IV UNDER GARRISON ENGINEER (SOUTH) AT BATHINDA MILIATARY STATION
2022_MES_565889_1
GE(S)/BTD/TOKEN NO 47 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(S)BATHINDA
Class D
Category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹96,600
Yes
21 Feb 2023
29 Nov 2022
29 Dec 2022
29 Nov 2022
27 Dec 2022
13 Dec 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm Each as doors, windows & ventilators etc and removal from site complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n,exc 2 Sqm Each and removal from site complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm Each with shutters of any description (W/out taking off shutters from the and frames) and removal from site complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fore tip rail, lock rail & bottom rail on either side and as gap insert fir top rail, lock on either side and as gap insert fir tip rail & bottom raill, paneling of plain colour PVC sheet to be filled in MS frame welded/sealed to the stiles and rails with suitable PVC shet beading and jointing together with solvent cement, supplying & fixing of frame at site complete all as specified and directed.
S&F 100mm long, Aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and directed.
S&F 150mm long, Aluminum Anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F 125mm long, Aluminum handles cast type, Anodised complete all as specified and directed.
S&F 75mm long, Aluminum handles cast type, Anodised complete all as specified and directed.
S & F ball catcher with 8mm dia steel ball and body and striking plate including letting in oncert surfaces with dash fastener complete all as specified and directed.
S & F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., including making good the disturbed surface with brick work repair in CM 1:6 finished even & smooth and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F Factory made 35mm thick second class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel or 9mm B.W.P. commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treates, complete all as specified and directed.
Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. complete all as specified and as directed. Note - Wire gauze / glass to be measured and paid separately
S&F Mild steel galvanised wire cloth 0.46mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and as directed.
S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
M&L for 18/19 thick both side Prelaminated (both site with decoration choice) particle board, interior grade fixed with screws to timber frame work complete all as specified and directed.
S & F in repair 140mm length Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor work complete all as specified and directed.
S&F Framed work such as grills, gratings,etc., with ends of bars shouldered and / or rivetted or forged in to spikes ; framed guard bars ; barred iron doors, ladders,; framed balusters; walk ways ; railings ; and similar works conforming to Fe290, Grade E-165 complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in Each pane complete all as specified and as direcetd.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in Each pane complete all as specified and as direcetd.
M&L for applying two coats synthetic enamel paint over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.
S & F in repair anodized aluminium frame for door, window and ventilators with one or more rebate including joining cleat for fixing complete all as specified and directed.
Material and labour coloured Non - skid Ceramic tiles 7 to 8 mm thick area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in CM(1:4) including dismantling exicting floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed.
Material and Labour for glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 and finish wall surface rough to receive the tile/marble etc including dismantling existing wall tiling including racking out joints hacking for key and scrubbing etc and removing rubbish from the site etc complete all as specified and directed.
M&L in repair marble work 15 to 18 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges of stone sslabs on edges over 15mm thick screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall riling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing rubbish from the site etc.complete all as specified and directed.
M&L for granite 15 to 18 mm thick (table rubbed and polished) as in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including M&L for 15 mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall riling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing rubbish from the site etc.complete all as specified and directed.
Roundening to the edge of stone slabs on edge such as plateform, steps and other similar situations complete all as specified and directed.
Material and labour for hard core of broken bricks of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed.
M&L for cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed.
S&F in repair PVC connection 15mm dia with PTMT nuts of length 450mm long of approved quality complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 100mm size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed.
S&F in repairs 15mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with oong shank & cup etc complete all specified and as directed.
Supply and fixing Tubular towel rail, 20mm dia, D type, 60cm long between flanges (Brass chromium plated) complete all as specified and directed.
S&F in repair chromium plated soap tray of any size stainless steel any type and dixed to plugs on wall wit chromium plated brass screws complete all as specified and directed.
S&F in repair fancy type chromium plated Bib tap 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixing complete all as specified and directed.
S&F in repair stainless steel plate racks of size 600mmx600mmx250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl 40mm waste fitting, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl 40mm waste fitting, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.
M&L and fixed in repairs for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking up or down GI tubing 15mm bore pipe complete all as specified and directed.
Taking up or down GI tubing 20mm bore pipe complete all as specified and directed.
S&F GI tubing 15mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor complete all as specified and directed.
Taking down rain water pipe and eaves gutters (any size and pattern) incl all fittings heads shoes bends swan necks etc complete all as specified and directed.
S&F PVC110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps as directed 6 Kg/Sqcm complete all as specified and directed.
S&F PVC110mm bore (SWR) pipes single socketed, in any length with rubber ring laid in floor as directed 6 Kg/Sqcm complete all as specified and directed.
S&F in repair PVC110mm bore (SWR) bends of any redius / shoe fixed to PVC pipes complete all as specified and directed.
S&F in repair 75/100mm dia of PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 15mm gun metal gate valves with iron whel head complete all as specified and directed.
S&F in repair 20mm gun metal gate valves with iron whel head complete all as specified and directed.
S&F in repair Vitreous Chinaware wash basin, white, flat back, size 550x400mm excluding ditto but including brackets (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste pipe coupling & PVC waste pipe of 32mm dia etc complete all as specified and as direcetd.
Excavation over areas not exceeding 1.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.
Excavation of areas exceeding 1.5 mtr and not exceeding 3.0 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.
Excavation of areas exceeding 3.0 mtr and not exceeding 4.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.
Excavation of areas exceeding 4.5 mtr and not exceeding 6.0 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.
Material and Labour for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation filling, sub base and mass concrete complete all as specified and directed
Material and Labour for PCC 1:2:4 type B-2 using 40mm graded aggregate as in foundation filling, sub base and mass concrete complete all as specified and directed
Material and Labour for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or ebven & rough to receive the topping layer complete all as specified and directed
Material and labour for loose filling with broken bricks of sub class B old size of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed .
Material and labour for form work to sides of concrete flats and similar work exceeding 10cm but not exceeding 20cm wide for rough finish surface complete all as specified and as directed .
S & F MS rungs of 20mm dia 20mm dia bar etc complete all as specified and as directed .
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth ; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, for laying cables etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in soft /loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 3.0 mtr in depth ; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, for laying cables etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in soft /loose soil complete all as specified and directed.
Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.
Labour for earth filling under floor, spreading, levelling in layers n exc. 25 cm thick well ramming including watering as required and consolidation complete all as specified and as directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed.
M & L for sand cushioning 230mm thickness (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness punned down to 180mm after laying of cable in trenches for protection of cable complete all as specified and directed.
Supplying and laying reinforced precast concrete cable cover LV, Type 1, flat, size 250mm X 150mm X 40mm as per IS complete all as specified and directed.
Supply and fixing GI tubing, light grade, 40 mm bore for cable protection laid in trenches/fixed to poles/along wall/under road/across the drain complete all as specified and as directed. (Note :- Excavation, earth work, cutting of floor, cutting of road and MS clamps for fixing the pipe along pole and wall shall be measured & paid separately under appropriate item of this Schedule.)
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sqmm 4 core complete all as specified and as directed.
M & L for making the hole under road and hard standing suitable for laying and inserting pipe upto 80mm dia any length by mechanical drill system or Auger system and making the surface good as existing surface insulator with aluminium binding complete all as specified and as directed.
S & F voltage stabilizer for automatic operation three phase, naturally oil cooled, indoor type & designed for input variation between 300V to 480V withoutput voltage stabilizer at 415 with accuracy + 2.5% and speed of correction 8 volts per second and capacity uoto 10 KVA complete with all neccessary connections etc complete all as specified and as directed. (Note:- Required cable for connection lugs abd all accessories will be provided by the contractor nothing will be paid extra)
M&L for 150mm dia (internal) Sail-glazed stoneware drain pipes grade 'A' laid in trenches and jointed with CM(1:1) complete all as specified and directed.
M&L for providing PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in conc bed to drain pipe including packing under & haunching against the sides of pipe 150mm dia (internal ) after these are laid in trenches complete all as specified and as direcetd .
M & L for 50mm thick PCC 1:2;4 type B-1 (using 20mm graded crushed stone aggregates) as in flooring, finished even and smooth without using extra cement complete all as specified and as direcetd .
M & L for precast concrete slab in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates set and jointed in CM 1:4 complete all as specified and as direcetd .
M & L for cement concrete type B-1, 1:2:4 mix (20mm graded crushed stone aggregate) as in bedding, benching of manholes, coping, roof kerbs and surface channel etc. complete all as specified and as direcetd .
M & L in repair cement concrete type B-1, 1:2:4 mix (20mm graded crushed stone aggregate) as in coping, bed block etc. complete all as specified and as direcetd .
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as direcetd
S&F 100mm, sand cast, cast iron, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls & fixing with clamps complete all as specified and directed.
Demolition of RCC of any of any description such as kitchen chimney, chajja, shelves, OHT tanks etc andin any position not otherwise specifically provided for complete all as specified and directed. (reinforcement cut as required to facilitate demoltion)
Taking down cement plaster on brick work or concrete surfaces etc including raking out joints or hacking for key, scrubbing down with water etc.complete all as specified and as directed .
M&L for Rendering 15mm thick cement palster in CM 1:6 on brick or concrete surfaces other than fair faces finished even and smooth without using extra cement complete all as specified and as directied.
M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed
M&L for Rendering 15mm thick cement plaster in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed
M & L for rendering 10mm thick om brick or concrrete surfaces in CM 1:3 as on ceiling, facia, roof projection etc finished even and smooth without using extra cement complete all as specified and as directied.
M&L for providing RCC type B1 1:1½:3 (20mm graded agg) as in slabs supported on walls, lintel beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like cmplete all as specified and as direcetd.
M&L for Formwork to soffits of suspended slabs, such as roof slabs floor slab, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished concrete surface cmplete all as specified and as direcetd
M&L TMT steel bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as direcetd.
Ditto as per item No. 91 Above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as direcetd.
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed.
Material and Labour for RCC, M-25 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete footings, foundation beams etc complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.(As in sunsheds).
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.(As in sunsheds).
S&F mild steel Framed brackets of angles or tees with web and flanges as in cooler stand /chajjas cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg Each brackets, conformingto Fe.290.Gde-E-165 (Brackets over 10 kg Each to be measured under 'Structural Steel') complete all as specified and as directed
Demolition of brick work built in cement mortar including all quions, arches , pillars etc complete as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m means radius built in CM (1:6) using old size bricks complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m means radius built in CM (1:4) using old size bricks complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m means radius built in CM (1:4) using old size half bricks complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:4) complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection, and path surfaces finished even and smooth with out using extra cement complete all as specified and as direcetd.
Supply and fixing in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (weight 210 gms Minimum) complete all as specified and as directed.
M&L for three coats of white wash on new plastered surfaces as in ceiling including preparation of new surfaces complete as specified and directed.
M & L for two coats of snowcem (cement base paint) or new surfaces of walls, including preparation of surfaces complete as specified and directed.
M&L for applying one coat of synthetic enamel paint on old wooden surfaces including preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and complete as specified and directed.
M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description complete all as specified and directed.
M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished surface of concrete complete all as specified and as directed.
M & L for Formwork to side of pillars, posts, struts, piers, columns and stanchions of concrete on rough finished surface of concrete complete all as specified and as directed.
Material and labour for RCC M-25 design mix (using 20mm graded aggregate ) as in Columns, pillars, piers, posts and struts complete all as specified and directed
Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like etc complete all as specified and as directed
Material and Labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed
S & F 30mm thick flush shutter, solid core construction with particle board core and ply wood face panels commercial type on both side complete all as specified and as directed
S & F 300mm Mild Steel sliding bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed
Supply and fixing Mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and as directed
M & L for preparation of new wood surfaces and applying two coats of sythetic enamel paint over pink primer complete all as specified and as directed
S & F in repairs vitreous china urinal, bowl type (back or corner wall type) including flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and as directed
S & F viterous china urinal partition white of size 310x700mm, including all accessories/fittings etc complete all as specified and as directed
Supply and fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
Supply and fixed in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap including water closet seat cover of plastic, jet etc. complete including necessary PVC pipe fitting complete all as specified and as directed
S & F in repair PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and as directed
S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed
S&F in repair 15 mm bore chromium plated brass angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule
S & F in repair CP grating (with or without waste hole), 75/100 mm size, fixed on floor/nahani traps etc complete all as specified and directed.
S & F in repair towel ring brass chromium plated tublar towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
Preparation of new plastered or unplastered surfaces of wall, applying 3mm thick wall care putty on wall and two coats of distemper oil emulsion over one coat of priming plastered surfaces with alkali resistant priming paint complete all as specified and directed
M & L for applying two coats of acrylic distemper after complete removal of existing treatment complete all as specified and directed.
M & L for applying 3mm thick layer of putty in two layers over old prepared plastered surfaces of wall complete all as specified and directed
M&L preparaton of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed
Preparing of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent, salt and trading oil and greasy spouts and applying one coat of cement base paint on walls (snowcem) etc. complete all as specified and directed.
All as per item No. 133 But one subsequent coat of cement base paint complete all as specified and directed
Supply and fixing in repair powder coated aluminium anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
Supply and fixing in repair anodized aluminium window/ventilators shutters/partition powder coating of any color (thickness of powser coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete all as specified and directed
Supply and fixing in repair anodized aluminium window and ventilators shutters powder coating of any color (thickness of powser coating not less than 50 micron)side hung type w/o sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete all as specified and directed
S&F in repair three track aluminium anodised sliding window with three sliding shutter, the size of outer frame three track 75x37x1.5 mm (using two track for glazed window shutter and one track for wire gauged, the section shutter size 37x18x1.2mm) and glazing with 5mm thick transparency glass of polycarbone including all round suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and as directed
S&F 12mm thick pre-laminated particle board, interior grade, prelaminated on both side with decorative choice lamination , fixed with screws to timber frame work as in kitchen cupboards, drawers, shutters, shelves complete all as specified and as directed
S&F aluminium body door closer hydraulically regulated designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and as directed
S & F continuous (piano) hinges (ISI marked), mild steel, bright finish or electro-galvanised with width of flaps 20 mm (when open) complete all as specified and as directed
S & F plain fillets, second class hardwood square, rectangular or triangular in section, clean sawn, secured with nails or brads and area not exceeding 3 sq cm complete all as specified and as directed
Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc. One brick complete all as specified and as directed
M&L for vitrified ceremic tiles 7-8 mm thick, in light shade, (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) including dismantling exicting floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed.
M&L for Machie cut kota stone slab flooring not less than 18-22mm thick over & incl 15 mm thick in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing jointed over including dismantling existing flooring and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified and directed.
M&L for Machie cut kota stoe slab flooring not less than 18-22mm thick in riser/trends of steps(in Single piece), skirting, dado and pillars over & incl 10 mm thick rendering in 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing,griding and polishing mirror finish including dismantling existing flooring and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified and directed.
Dismantling water tank and removing to store exceeding 500 ltr & not exceeding 1000 ltr capacity complete all as specified and directed.
Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
S & F in repair PVC waste pipe with socket suitable for connection to waste fittings of 32/40mm dia, and length minium 75cm complete all as specified and directed.
Material and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 -W (Gde-E- 250) quality-A complete complete all as specified and as directed
S & F in repair joist, channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. not exceeding 10kg each brackets conforming to FE-290 Gde-E-165) complete all as specified and as directed.
S & F Box type steel window (both with & w/o glazing bars) with side hung shutters including hinges, stay, tower bolt, handles etc including one coat painting (Ref CEBTZ Drawing) complete all as specified and as directed.
S & F steel ventilators fixed type with glazing bars complete all as specified and as directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in Each pane fixed to steel or wooden window frames complete all as specified and as direcetd.
M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic paint (for steel surfaces complete all as specified and as direcetd.
M & L for 100mm thick cement concrete type B-1, 1:3:6 using (20mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as direcetd .
Taking down carefully existing copper point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete all as specified and directed.
M & L for point wiring for one light /ceiling fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed . (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' /BOQ ).
All as per srl item No. 158 (here-in-before) but socket 3 pin 5 Amp 230 volt flush type on same board complete all as specified and directed.
All as per srl item No. 158 (here-in-before) but for one socket point out let 3 pin 5 Amp in independent board complete all as specified and directed.
All as per item No. 158 here in before but for one socket out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor and 2.5 sq mm PVC insulated copper conductor as earth contiuity conductor complete all as specified and directed.
S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
S&F Socket 3 pin, 5A, flush type 230volts AC complete all as specified and directed.
S & F switch socket combination 3 pin 15 Amp 230 volts AC complete all as specified and directed.
Taking down ceiling fan, dismantling blades and removing fan and blades to store, painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and repair/rewiring if found UNSV refixing ceiling fan and connection up including provision of calbe from ceiling rose or connector of fan complete all as specified and as directed
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.
S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply complete all as specified and directed.
S & F LED lights fitting 1 x 20w. 220V, AC decorative box type with driver, holder including one LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F sub main wiring (with approved colour coding as per IS) with single core 4sqmm FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade along with single core FRLSH PVC insulated flexible stranded copper conductor 4sqmm 1.1 KV grade for earthing in & including 20mm medium duty PVC concealed conduit, complete all as specified and directed. (Note:- 2 run of main cable and one run of earth cable measured as one run of submain).
S & F single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed.
S & F sub main two single core PVC copper conductor unsheathed wire multi standed 6.0 sqm including sutting chasing and grouting PVC pipe including TEE. Elbow, Bend etc and including 6.0sqmm copper conductor single core wire connected by common earth all as specified ; in & including 20mm dia concealed PVC conduit, medium grade, ISI marked complete all as specified and directed. (Note :- Two length of 6.0 sqmm cable and one length of 6.0 sqmm earth cable along with PVC conduit will be measured as one running length)
S&F MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified and directed.
S&F MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified and directed.
S&F MCB 415V TPN 63 Amp complete all as specified and directed.
S&F MCCB 4 pole 125 Amp, 25 KA complete all as specified and directed.
S&F blanking plate etc complete all as specified and directed.
S&F sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.
S&F sheet metal encloser double door 12 way SPN 230V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made plate for unused module complete all as specified and directed.
S&F sheet metal encloser double door 06 way TPN 230V with provision of MCB TPN/FP as incomer and SP MCB's as outgoing complete all as specified and directed.
S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.
S&F LED 9/10W bulb for Lamp Holder complete all as specified and directed.
S & F LED light fitting 1x9w / 1x10w bulkhead uminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection, including fixing with GI/MS bracket made out of suitable size of light grade tube with suitable length bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection complete all as specified and directed
M & L for VTPN 125A MCCB incomer Double Door DB, 8 way rated bus bar 415 volts, 50 Hz with vertical type double door and TP/DP/SP MCBs as outgoing IP-30 & IP-42 protection, universal mounting with copper bus bar, neutral link, earth link, earthing link, detachable gland plates with knockout on both side all as per fixing in wall complete all as specified and directed.
Supply and fixing single phase, 50 hz, 1400 rpm, 230 volt exhaust fan of size 300 mm sweep with louvers shutters, having BEE 5 star rating complete all as specified and as directed .
M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6.3 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.
Note:- Design Mix M25 will be approved by the GE from existing running contracts.
Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
SHARDA ENTERPRIES
M/S BHAGWATI CONSTRUCTION COMPANY
M/s Balvinder Singh Engineer and Contractors
K L JINDAL AND CO.
M/S VIAJY BUILDERS & DEVELOPERS
Aman Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .