DEVELOPMENT OF ASSAM AGRICULTURAL UNIVERSITY , CONSTRUCTION OF LIBRARY AT FIRST FLOOR OF WET LABORATORY, AT COLLEGE OF FISHERY , RAHA

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, column.... 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived.......

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level upto floor V level :Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm

For shutters of doors, windows and ventilators including providing and fixing hinges/pivots.......Anodised aluminium (anodised transparent.....

Providing and fixing glazing in aluminium door,window,ventilator shutters and partition etc …..with float glass panes of 5mm thickness

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Finishing walls with textured exterior paint of required shade :(13.45.1) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (i) 15 mm nominal dia Pipes

32 mm nominal dia Pipes

50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work 100mm nominal dia pipes

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing mirror of superior glass (of approved quality) and Circular shape 450mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

32 mm nominal bore.

50 mm nominal bore

Providing and fixing white vitreous china pedastal type water closet (European type W.C. Pan ) with seat and lid......W.C. Pan with ISI marked.......

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin......One urinal basin with 5 litre.....

Providing and fixing one piece construction white vitreous china squatting plate.......Single squatting plate with 5 litre.....

ELECTRICAL Wiring for circuit/ submain wiring along with Earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.7.1 : 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

1.7.2 : 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

1.7.3 : 2 x 4 sq. mm + 1 x 4 sq. mm earth wire

1.7.4 : 2 x 6 sq. mm + 1 x 6 sq. mm earth wire

1.7.11 : 4 x 16 sq. mm + 2 x 6 sq. mm earth wire

Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI box & earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable etc as required. 1.10.1 : Group A

1.10.2 : Group B

1.10.3 : Group c

Wiring for light/ power plug point with 2x4 sq mm FRLS pvc insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 no. 4 sq mm FRLS PVC insulated copper conductor single core cable foor loop earthing as required.

Supplying & fixing following size/ modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1.27.1 : 1 or 2 module (75mm x 75mm)

1.27. 2 : 3 module (100mm x 75mm)

1.27.3 : 4 module (125 mm x 75mm)

1.27.4 : 6 module (200mm x 75mm)

1.27.5 : 8 module (125mm x 125mm)

1.27.6 : 12 module (200mm x 150mm)

Supplying & Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 1.24.1 : 5/6 A switch

1.24.3 : 15/16 A switch

1.24.4 : 3 pin 5/6 A socket outlet

1.24.5 : 6 pin 15/16 A socket outlet

1.24.6 : Telephone socket outlet

Supplying & Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1.21.2 : 25 mm dia

1.21.3 : 32 mm dia

Supplying & fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

Supplying & Fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing & fixing 3 pin 5/6 A modular socket outlet & 5/6 A modular switch, connections etc as required.

Supplying & Fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing & fixing 6 pin 5/6 A & 15/16 A modular socket outlet & 15/16 A modular switch, connections etc as required.

Supplying & Fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections as required.

Supplying & Fixing brass batten/ angle holder including connections as required.

Installation, testing & commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories & tube/ lamp etc directly on ceiling/ wall, including connections with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable & earthing etc as required.

Installation, testing & commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories & tube/ lamp etc including supplying & fixing ball & socket arrangement, 2 nos. down rods of 20 mm dia x 1.6 mm thick steel conduit upto 30 cm length, painting & wiring the down rods & connections with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable & earthing etc as required.

Installation, testing & commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable, including providing & fixing phenolic laminated sheet cover on the fan box etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required. 1.50.1 : Upto 450 mm sweep

Supplying & drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required. 1.53.2 : 2 run of cable

Supply, Installation, Testing & commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor… etc complete as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.3 : 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required. 2.10.1 : Single pole

2.10.2 : Single pole and neutral

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode including connection/termination with nut, bolt, spring, washer etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubicle panel, making connections etc required. 2.2.13 : 100A, 30 KA, FPMCCB

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioninq etc. as required 2.12.1 : 40A

Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. (29.1.3) : 2 Ton capacity (29.1.3.1) : (Carrier make) estrella R410

Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (30.11.2) : Overload Relay Range 6.0 -9.3 Amps for 3.7 KW

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) (31.1.6) : 3.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying with fitting and fixing of Angle iron framing made 50 mmx50 mmx5 mm size angle iron for accommodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine

LED Bulb: KOLORS brand 9watt model no: 2204BU09 (CW)

LED batten: KOLORS brand 20 watt model no: 2402BA20 (WW) KARIS LED BATTEN LIGHT

Exhaust Fan of the following sizes and its all accessories suitable for operation on 230V single phase, 50 Hz, AC supply complete as required. 380 mm sweep (HAVELLS/CROMPTON/ BAJAJ)

Furniture Godrej Make:Supplying Fitting And Fixing Open Book Self 8' to 9' H (6layer)(1850 X 900 X 316)

Supplying Fitting And Fixing Locker unit 1830X380X450)

Supplying Fitting And Fixing Reading Table 4 seating capacity(1800 X900X740)

Supplying Fitting And Fixing Reading Chair(CH7B)

Computer table (900 X 500 X 750)

Supplying Fitting And Fixing Staff Chair (CH7B)

Supplying Fitting And Fixing Office Table(1365 X 680X735)

Kaustav Saikia

Dipen Ch. Das