Loading…
Loading…
Tender Value
₹13.3 L
EMD Value
₹16,600
Closing Date
10 Aug 2026, 9:30 pm
Rural Development and Panchayat Raj Department
SHWETHA M S
9448528405
CONSTRUCTION OF ANGANAVADI BUILDING AT MAHADESHWARAPURA VILLAGE IN PANDAVAPURA TALUK, MANDYA DISTRICT.
RDPR/2026-27/BD/WORK_INDENT27629
RDPR/2026-27/BD/WORK_INDENT27629
Reserved
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Mandya
9 documents required · 9 mandatory
The Tenderer shall have Class-IV and above KPWD Registration Certificate.
Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie., 2021-22, 2022-23, 2023-24 2024-25 and 2025-26 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed
Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years
GST Registration and Returns for the year 2025-26 GSTR-3B
List of existing commitments and ongoing works
List of works for which tenders already submitted
Bidders Shall Ensure upload Valid Domicile or Residence Certificate as per the Standards and Govt Gazette should be residence of Karnataka state for more than 10 Years.
ST Reserved Category Certificate should be attached
GST, PAN CARD AND OTHER ADRESS PROOF OF THE AGENCY
₹500
₹16,600
24 Jul 2026
24 Jul 2026
11 Aug 2026
7 Aug 2026
CONSTRUCTION OF ANGANAVADI BUILDING AT MAHADESHWARAPURA VILLAGE IN PANDAVAPURA TALUK, MANDYA DISTRICT.
Providing and Consructing 1 st Class wire cut Terracotta brick masonry 230mm thick (9''x 4" x3") or above using bricks with minimum crushing strength of 100kg/sq.cm of approved quality / approved manu...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface/ceilings including rounding off corners wherever required smooth rendering, providing and removing sca...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore
Providing and fixing brass bib cock of approved quality. 20 mm nominal bore.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Broken stone aggregate 20 mm size
Broken stone aggregate 12 mm to 10 mm size
Portland Cement
Size stone 20 x 20 x 25 cms
Bond stone 20 x 20 x 45 cm
Super Plasticizer admixture IS marked as per 9-103-1999
Plasticizer / super plasticizer
TMT 550/550D Bars
Supplying of 1 st Class wire cut Terracotta bricks Size 230mm thick (9''x 4" x3")
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_07_2026-27.pdf
Others - Notification • 0.45 MB
KW1_ST_RESERVED.docx
Tender Document • 1.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].