RAJAPALAYAM-PROCUREMENT OF 7 NOS OF LCV FOR SWM PURPOSE

Amount

Supply and delivery of 2cum capacity box Tipper Light Commercial Vehicle (LCV) including the Registration, Insurance & Taxand Providing audio equipments (Amplifier with USB facility, Horn speaker) with necessary wiring, switches for Door to Door Collection of Garbage in Solid waste as per the following technical specification 1) Displayment (CC) Engine capacity. - 700 CC - 1250 2) Max power - 20-30BHP @ 2500 rmp and above 3) Max Torque - 500NM @ 2000 rmp and apove 4) Type of fuel - Diesel 5) Load capacity - 2 cu.m 6) Vehicle emission Norms - BS -VI 7) No of cylinder in engine -2 - 4 cylinder 8) Length of chassi - 3800 mm - 3950 mm 9) Width of chassis - 1500mm -1550 mm ground clearance. 150 mm - 165mm 10) Fuel tank capacity - Diesel -30 Ltrs to 40 ltrs CNG -12-25Kg 11) Size of tyres & No - 145 R 12 - 5 No5 12) Wheel base - 1900 mm -2250 mm 13) Gross vehicle weight - 1500 kg -1900kg 14) Clutch - single plat dry friction diaphragm 15) Transmission system - Manual 16) No of speed / forward gears - 4 No speeds (4F +1R) 17) Type of steering - Manual /power 18) Speed Governors - Shall be fitted 19) Pay load - 800kg to 1000kg 20) Tipper body length - 2100 mm-2200mm, Mild steel 21) Tipper body width - 1400 mm -1500mm, Mild steel 22) Tipper body heigth - 750mm-950 mm, Mild steel 23) Side portion (LH & RH ) & rear doors sheet including frame sheet thinkness - 1.6mm, Mild sheet 24) Tipper body top sheet including frame sheet thickness - 1.6mm, Mild sheel 25) Tipper body Top Lid sheet thickness - 1.2mm, Mild steel 26) Tipper container - Tipper contanier should be fabricated with two doors on the rear side and four doors on four top corners of the containers with hinge and locking system. A partition should be provided on the middle of container along the vertical length of the body 27) Tipper body Top lid main sheet thickness - 75+40+60 mm 28) Hydraulic cylinder make - Reputed make 29) Hydraulic cylinder driven - Main Engin 30) Pump make - As per IS standard 31) Painting - should be painted with one coat of Anti-corrosive epoxy primer and two coats of enarnal paints for approved quality to ensure long lasting resistance for weartherizing and breakage .The color shade should be as per norms 32) Lettering - To be carried out as directed by dept officers 33) Tipper body rear door - shall be with necessary locking facility 34) Side safety guard - Shall b provided as per RTO requirement 35) Additional conditions - vehicle with fuel sensor and GPS tracking 36) Warranty distance /year - 25000KM/12 months whichever is earlier.

Add GST 5%