PROVN OF VENTILATION TO POL STORE WITH KOTA STONE FLOORING AND WALL PAINTING, PROVN OF CERTAIN B/R MINOR WORKS IN CERTAIN MARRIED ACCOMODATION AND PROVN OF EXHAUST FAN IN SMQ(PH-IV) AT AF STN HASIMARA UNDER GE(AF) HASIMARA

Amount

Demolition of brick work built in cement mortar and removing from site, complete all as specified and as directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM(1:6), complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc and removing rubbish off the premises, complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar (1:4), mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and as directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only liquid water proofing compound of approved make, complete all as specified and as directed.

M&L for two coat of white washing on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots, complete all as specified and as directed.

M&L for three coats of white washing on newly plastered surfaces of wall including preparation of surfaces, complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over complete removal of existing treatment of old surface of wall, complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer to new plastered surfaces of wall including preparation of surface, complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer to old surfaces of wall including complete removal of existing treatment of surface, complete all as specified and as directed.

M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces, complete all as specified and as directed.

M&L preparation of new steel or Iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.

S&F steel windows for industrial building, fixed type with glazing bars, complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290), complete all as specified and as directed.

S&F of stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

M&L for flat iron fillets for securing wire mesh etc including necessary driling, bolting or rivetting etc, conforming to E-165 (Fe-290), complete all as specified and as directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in bed plates, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premises, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster as in backing of tiles in CM(1:4), complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over screed bed/bedding layer of in CM(1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Supply only ball bearing of rolling shutter suitable for 32 to 40mm suspension shaft, complete all as specified and as directed.

Supply only tension spring of rolling shutter suitable for 32 to 40mm suspension shaft, complete all as specified and as directed.

Supply only mild steel pipe heavy duty 40mm dia suitable for shaft of rolling shutter including dismantling the old rusted broken shaft and positioning with all accessories , complete all as specified and as directed.

S&F safety lever lock (best quality) mild steel with 4 levers for rolling shutter, complete all as specified and as directed.

S&F in repairs steel rolling shutters of 1.00mm thickness laths without ball bearing and including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type, complete all as specified and as directed.

S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified incl necessary dismantaling CGI sheets as in roof covering, complete all as specified and directed.

S&F of pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified incl necessary dismantling CGI sheets as in roof covering, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness, (below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and as directed.

M & L for plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation filliing or mass concrete, complete all as directed.

S & F vitreous china wash hand basin, oval shape, flat back of size 550 x 400 mm excluding taps but including chain, plug & porcelain stopper, bracket, complete all as specified and as directed.

S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and as directed.

S&F fancy type 15mm bore chromium plated stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F GI water tubes 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and as directed.

S & F grating doom round 100mm size of PTMT (minimum weight 25gms), complete all as specified and as directed.

S & F 75mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to walls, etc with all necessary fixing arrangement, complete all as specified and as directed.

S & F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and as directed.

S & F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and as directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through and including PVC casing caping surface type on wall/ceiling with surface PVC rectagular box of size not less than 100 X 100 X 50mm with 3.0mm thick plastic laminated sheet cover as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected to common earth dolly for one light point/fan point controlled by one, one way swtich, complete all as specified and as directed

Supply and fixing switch, piano type, single pole, one way, 5/6 Amp, completes all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300 mm sweep upto frame and louvers and including cutting to existing wall of any thickness and description and making hole for fixing of exhaust fan, with necessary nuts and bolts and making good surfaces, complete all as specified and as directed.

Supply and fixing ceiling rose 3 phase/PVC/polycarbonate, isolated body, complete all as specified and as directed.

M & L for flameproof point wiring surface type with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor, (ZRFR) cable of working voltage 1100 volts grade conforming to IS-694 drawn in and including steel surface conduit with all fittings & accessories such as FLP flexible conduit, FLP junction box, bends etc. with 1.60 mm thick pressed steel or mild steel sheet sunk box, including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (ZRFR) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one fan/light point controlled by one 16 Amps single pole FLP switch including taking down old unserviceable point wiring complete all as specified and as directed.

S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed.

S&F LED light fittings, 1 x 20 Watt, flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable and flexible steel conduit of suitable size upto nearest ceiling rose, complete all as specified and directed.(Make : Bajaj/Crompton Greaves/Sudhir/Shyam Switchgear)

S&F in repair flame proof exhaust fan, 12", 1440 RPM, IP 66, made out of dynamically balanced hub of Aluminum alloy LM-6, having air discharge capacity of 1250 CFM coupled with flameproof motor of 0.25 HP single phase,including making hole in existing walls and making good the disturbed surface to match with the existing surface, complete all as specified and as directed. (Make : Bajaj/Crompton Greaves/Sudhir/Shyam Switchgear)

S & F in repair louvers 12" for flame proof exhaust fan, 12", 1440 RPM, complete all as specified and as directed.

S&F in repair flame proof sheet metal enclosure for double door IP 66 MCB DBs 8 way, phosphatised, powder coated including MCB SPN 6 Amp as incommer and 6 Amp DP MCB - 02 Nos as outgoing connection, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and as directed.(Make : Bajaj/Crompton Greaves/Sudhir/Shyam Switchgear) Note : Rates of MCBs shall be included in the quoted rates.

M & L in repair for flame proof junction box, with plain cover 3/4" ET, complete all as specified and as directed.

M & L in repair for flexible metalic hose conduit of dia 25mm complete all as specified and directed.

M & L for sub main wiring with two runs of 2.5 Sqmm (nominal area) single core cable FRLSH PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through and including steel conduits of suitable size, fixed to wall/ceiling etc including 2.5 Sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including steel conduits of suitable size including taking down old unserviceable sub main wiring, complete all as specified and as directed. (Two runs cables and one run of earth wire including steel conduits shall be measured as one length.) Note: An amount of Rs.6120.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

Hanuman Prasad Agarwal

Shri T P ANIL KUMAR

M/S BIJAY KUMAR SHIVA

BHARAT ELECTRIC

M/S. NARENDRA KUMAR GARG

M/S ROY ENTERPRISE

M/S BISHAL ENTERPRISES