Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable | |
| 2 | L2₹40.0 L+₹5.0 L (14.4%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹43.3 L+₹8.3 L (23.8%)Rejected-Finance PR CDA SC PUNE 01 THROUGH AO GE DEHU ROAD | L3 | Rejected-Finance High Rate |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE KHADAKWASLA
GE KHADAKWASLA
REPAIRS TO CERTAIN BR AND EM WORKS AT NO 5 BN ATT HOR SWIMMING POOL JTT AND RAKESH SHARMA BLOCK ETC AT NDA KHADAKWASLA
2024_MES_666130_1
8845/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHADAKWASLA
All as per tender documents
9 documents required · 9 mandatory
₹500
GE KHADAKWASLA
₹90,000
Yes
10 Oct 2024
16 Jul 2024
17 Sept 2024
16 Jul 2024
12 Sept 2024
31 Jul 2024
16 Jul 2024 - 31 Jul 2024
Amount
S&F in repairs SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 100 mm etc all as specified and as directed.
S&F in repairs SS Butt hinges, heavy weight, cold rolled, mild steel length of hinges 125 mm etc all as specified and as directed.
S&F in repairs extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.
S&F in repairs Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc all as specified and as directed.
S&F in repairs SS sliding door bolt 300mm long with plate type, with SS bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F in repairs Brass sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and as directed.
S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long etc all as specified and as directed.
S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places screw all as specified etc all as specified and as directed.
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc all as specified and as directed.
S&F in repairs door closer hydraulically regulated,aluminium (die cast) body ,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete etc all as specified and as directed
Supply and fix decorative type stainless steel curtain rod with brackets including holders, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.
Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary, necessary grinding, sanding, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and as directed . Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling (ii) The rates for necessary scafolding required shall be deemed to be included.
Repairs to aluminium door / window by removing from position and fixing in same position by reparing in all means. Area not exceeding 4.00 Sqm each complete etc all as specified and as directed. Note : New aluminium section requried for replacement shall measured and paid separately.
Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed..
S&F 4 mm thick figured glass,pin head type and glazing with oil putty/ wooden beading in squares n.exc 0.5Sqm in each pane complete all as specified and as directed..
S&F figured glass plate/box match to existing glazing as per site requirement including fixing adhesive/oil putty all as specified and directed
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed.
ditto item No 18 above but exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed..
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1 Sqm and n exc 1.50 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and as directed.
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed
S&F 2nd class hardwood Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, 30mm thick all as specified and directed
S&F 30mm 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), complete all as specified and directed .
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, & face is covered with decorative both faces veneer with lipping/frame to match complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately
S&F PVC door frame of size 50mm x 47mm made out of 5mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified & directed
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified & directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified & directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site complete all as specified & directed
Taking down existing aluminum chowkats or frames of any description and in any position not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.
S&F, Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed . Note :- Floor door spring & sheet glass shall be measured and paid seperately.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc all as specified and as directed.
S&F, 5.5 mm thick sheet glass, ordinary quality and glazing with rubber packing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed .
S&F, 5.5 mm thick sheet glass, ordinary quality and glazing with rubber packing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed .
S&F, Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturs complete all as specified & directed
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed .
S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 75 mm etc all as specified and as directed.
S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 125 mm etc complete all as specified and as directed.
S&F SS Butt hinges, heavy weight, cold rolled, stainless steel length of hinges 100 mm etccomplete all as specified and as directed.
S&F 150 mm aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and as directed.
S&F extruded aluminium alloy plate handle 'D' Type fabricated type anodized 150 mm long complete all as specified and as directed.
S&F Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc complete all as specified and as directed.
Ditto- all as per item no. 44 above but 300mm long.
S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq.cm & n. exc 6 sq.cm complete all as specified and as directed
S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and as directed
M&L for newly previously treated surfaces painting two coats of Synthetic enemal paint over a coat of pink primer on new wooden surfaces complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc., complete all as specified and as directed
M&L for 4mm thick Non Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and as directed ,
S&F asbestos cement plain building boards 4mm thk, fixed to timber /GI/MS framework with screws complete all as specified and as directed
M&L for anodised aluminium snap grid 605 x 605 mm frame work for false ceiling including exposed metal frame ceiling with 12mm Gypsum Board 12mm thick in ceiling for fixing in 600mm x 600mm grid complete all as specified and as directed.
M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions false ceiling including sunk or raised moulding pattern approved by GE fibre fixed to & including the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to Gl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L in repairs for 2nd class hard wood clean sawn battens at 30 cm centre, sectional area exc 5 & n.exc 15 sqcm complete all as specified & directed.
M&L for 12 mm thick plywood, grade BWP type BB fixed with screws to timber frame work complete all as specified & directed.
M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture's instruction complete all as specified & directed.
Material and labour for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified & directed
S&F in repairs 12mm thk Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame/Almn door/ snap grid work complete all as directed.
Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified & directed.
S&F in repairs 2nd class hardwood timber in clean sawn battens or fillets complete all as specified directed.
S&F in repairs stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed
M&L in repairs 12mm thick toughened moduler glass partitaion including seamless frosted glass fixing at powder coated aluminium/SS-304 corner frame/bracket work for glass, seal by silicon sealent all as specified and directed
S&F in repairs Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete etc all as specified and as directed.
S&F in repairs Towel ring of stainless steel fixed in repair to walls with chromium plated brass screws complete etc all as specified and as directed.
S&F in repairs chromium plated tubular towel rail square rod, D type 60cm long between flanges etc all as specified and as directed.
S&F in repairs heavy duty Plantex high grade styainless steel towel rack 600mm long with lower fixed on wall complete all as specified and as directed.
S&F in repair ebello square vitreous china wash hand basin counter top, snow white, fancy type of overall size 390x390x150 mm, including 32 mm pop-up CP waste coupling full thread, CP Bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange, 450 mm long PVC Connection pipe etc complete all as specified and as directed.
S&F in repairs chromium plated pillar cock tall body table top wash basins with tap hole complete all as specified and as directed.
S&F in repairs white vitreous china wash down water closet pan floor mounted size 670x410x715 mm with mild steel chromium plated or aluminised hinging device including soft closing seat cover, connection to drown pipe and flushing pipe all as specified and directed
S&F in repairs Vitreous China Urinal (flat back large) of size: 375x390x590mm with fixing accessories, including necessary cp waste coupling with bottal trap 32mm with 300mm & 175mm long wall connection pipe & wall flange cate no F850004, complete all as specified and directed
S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with wall flange alloy screwed for iron pipe 15 mm bore including urinal spreader with connection pipe complete all as specified and directed
S&F in repairs15mm Stop valves/ Angular stop cock with wall flange cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 40mm dia High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. Cm with all fittings Tee and Elbow etc and fixed to wall , floor etc.. complete all as specified and directed
S&F in repairs wash hand basin (match to existing) vitreous china white (flat back) of size 550x400mm including CI bracket 15mm dia polythene connection 450mm, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with mild steel chromium plated or aluminised hinging device including connection to drown pipe and flushing pipe all as specified and directed.
S&F in repairs Vitreous water closet (squatt pattern) 'long pan', size 580/630mm white with 'P' or 'S' trap, front or back inlet any pattren complete fixed in repairs complete all as specified and directed.
S&F in repairs vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed
S&F in repairs urinal spreader of CP cast copper alloy for fixing with 15 mm dia pipe. (match to existing fittings) complete all as specified and directed
S&F in repairs 32mm dia waste coupling suitable for WHB of SS (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and directed
S&F in repairs 32mm dia waste coupling suitable for urinals of SS (half or full threaded) (minimum -weight 32mm-45 gram) complete all as specified and directed
S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin/urinals complete all as specified and directed
S&F in repairs 15 mm PVC connections 15 mm size with PTMT nuts of length 375 mm complete all as specified and directed
S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and directed
S&F in repairs for providing long body bib cock foam flow, with wall flange, cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed
S&F in repairs stay, suitable for health faucet complete all as specified and directed.
S&F in repairs CP Knob, suitable for basin mixture complete all as specified and directed.
S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs ABS body chromium plated rain shower rose 100mm size complete all as specified and directed.
S&F in repairs ABS body chromium plated rain shower rose 100mm size with 225mm arm-square complete all as specified and directed.
S&F in repairs plastic water closet seat, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
S&F in repairs PVC low level flushing cistern including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs etc complete all as specified and as directed.
Taking down SWG/rainwater pipes 100mm dia (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., complete all as specified and directed
S&F Type B, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed.
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed
S&F 75mm dia PVC (SWR) grade, Type B, single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete including taking down of existing pipe complete all as specified and directed
S&F Type B, 75mm dia PVC (SWR) bends any radius complete all as specified and directed
Dismantling of cast iron 100/75 mm bore pipes jointed in cement motar including all fittings complete all as specified and directed
S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes etc complete all as specified and as directed.
S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 75mm bore pipes etc complete all as specified and as directed.
S&F CI bend 100 mm bore with oval access door etc complete all as specified and as directed..
S & F 100 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..
S&F CI cowl 100 mm size etc complete all as specified and as directed.
S&F in repairs 110mm dia PVC (SWR) bends any radius except fittings complete all as specified and directed.
S&F in repairs 110mm dia PVC (SWR) junction single(single T), Type B complete all as specified and directed
S&F in repairs 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, Type B, complete all as specified and directed
S&F in repairs Type B, 110mm dia PVC (SWR) vent cowl complete all as specified and directed
S&F in repairs SS gratings 127mm circular, round/square drain jali, complete all as specified and directed
S&F in repairs PTMT gratings doom 125mm dia with waste hole, (Minimum weight 40gms) complete all as specified and directed
S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin/urinals complete all as specified and directed
Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores, 15mm dia pipes complete all as specified and directed.
Ditto- all as per item no. 114 above but 20mm dia pipes.
S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc.. complete all as specified and directed
Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe complete all as specified and directed.
S&F galvanised mild steel medium grade tubes 20mm dia bore with all fittings and fixed to wall, floors etc.. complete all as specified and directed
Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe complete all as specified and directed
S&F in repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 16mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed
S&F in repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 20mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed
M&L for cutting chases, pinning on brick/stone, concrete wall in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth (area of C/S in cutting not exc 8 cm x 6 cm) complete all as specified and directed
S&F in repairs PVC flush tank ball cock set complete all as specified and directed.
S&F in repairs 15 mm bore GI tank nipple complete all as specified and directed.
S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.
Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc.complete all as specified and directed
M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and directed
M&L for newly plaster surface on wall and applying two coats of distemper oil emulsion over a priming coat with chalk whiting preparatory to distembering complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for coloured Glazed ceramic tiles in vertical surface 300x200x7mm or 450X 300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick backing coat in CM 1:4 etc complete all as specified and directed
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed.
M&L for 300X300X10mm thick Vitrified glazed designer dura stone tiles of any approved colour, heavy duty machine pressed including 15 mm thick screed bed of CM (1:6) in floors complete as approved complete all as specified and directed
M&L for Non skid/Matt finish full body vitrified tiles 7 to 8 mm thick area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM (1:6) complete all as specified and directed
M&L for glazed vitrified digital coloured tiles in verticle surfaces of pattern approved by GE, size 600x1200x10mm thick set, with Roff Vitro adhesive by Pidilile or equivalent and pointed in white or colour cement grout to match the tiles, including 10mm thick plaster in C:M (1:4) as a backing coat complete all as specified and directed
M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and directed
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and directed
M&L for 20mm thick Marble (of any type Milky white or any colour and shade matched with existing floor of HOR or any floor) tiles machine cut, in skirting/ dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
M&L for 15 to 20mm thick quartzs (of any type ) work (table rubbed and polished) of any color leather finished top surface, as in floor, platform, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed
M&L for 16 to 18mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed.
M&L for 16mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed
M&L for granite work (black, lakha red, flamed where ever necessary) (table rubbed 7 polished ) 16-18mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:3 complete all as specified and directed
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:3 complete all as specified and directed .
M&L for pre-polished coloured Chequered cement concrete tiles 20cm x 20cm x 25mm or 25cm x 25cm x 25mm or 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments over 20 mm thick screed bed in CM 1:6 in floors complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S&F in repair Co-polymer Poly-propylene (CP-PP) white swimming pool overflow pin grating size 100mm to 400mm length, match to existing pin complete all as specified and directed
Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor ccomplete all as specified and directed.
M&L for removing of existing plaster surface upto base level & cleaning the surfaces of roof/wall with wire brush with water thoroughly to remove all dust/dirt and loose particles, and applying 2 coats of asian smart care damp proof 2K on an interval of 4 to 6 hrs (1st & 2nd coat should be perpendicular direction) as per manufacture instruction, after plaster the surface and apply painting to match the existing surface, complete all as specified and approved by Accepting Officer.
M&L for preparing old plastered / concrete surfaces of roof/wall with wire brush with water thoroughly to remove all dust/dirt and loose particles and applying 3 coats of Dr fixit Newcoat / Asian paint damp proof on roof/wall surfaces including crack seal sealent if required at crack portion of roof/wall all application as per manufacturer instructions and including waranty certificate provided by applicator/company.
S&F Framed work for framed chajja, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete including dismantling of exiting all as specified and directed
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete including dismantling of exiting all as specified and directed
S&F in repairs 1mm Plain, galvanised, mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pie-ces can be cut) complete all as specified and diredted.
M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.
All as per item No 155 above but for Ceiling surface complete all as specified and as directed.
M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.
All as per item No 157 above but for Ceiling surface complete all as specified and as directed.
M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.
All as per item No 159 above but for Ceiling surface complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
All as per item No 161 above but for Ceiling surface complete all as specified and as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
All as per item No 163 but for Ceiling surface complete all as specified and as directed.
M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.
M&L for preparing old surfaces of floor tiles and applying one coat of protective acrylic exterior emulsion paint of approved make (Asian apex floor guard, Indigo floor paint or equivalent as mentioned in makes list of CA) complete all as specified and directed.
M&L for preparation of old treated any surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with filler/putty etc including cleaning and make the surface smooth and applying One coat of Duco paint by auto spray machine till the surface become fine glosy finish complete all as specified and directed.
M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.
M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed.
M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.
M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing etc till the surface became fine glosy finish complete all as specified and directed.
M&L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M&L for one coat of aluminium top reflecting coating above the membrane surfaces incl preparation of old painted APP modified membrane exc 10 cm width or girth complete all as specified and directed. Note: Quoted Rate is deemed to be included for necessary scafolding required.
M&L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
M&L for preparation of old treated Wall/Ceiling surfaces and applying one coat of luster paint complete all as specified and directed. Note: Quoted Rate is deemed to be included for necessary scafolding required.
Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / mirror lights/ table lamp lights in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like driver, side holders, holders, Table lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like lamp holder, connector, connection wire, capacitor etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below as supply only. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor has to rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill. The repair/maint in Cadets living accommodation (Sqn bldgs) shall be carried out as per the timings convenient to cadets or as directed by Engineer-in-charge and preferably during afternoon and study period. The contractor shall engage separate team of technicians / repairer for each Battalion. (v) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced on each and every light fitting and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M. (vii) The Electricians should be ITI (Electrical) qualified and the contractor should submit the copy of certificates of electricians while sigining the site orders.
Supply only Retrofit pendant lamp holders suitable for table lamps or wall bracket light fittings or for ceiling lights complete all as specified and directed
Supply only PVC / polycarbonate Angle/Batten type lamp holders retrofit type complete all as specified and directed
Supply only capacitor of 1.5 mfd for wall fans. Make: Epcos/Tibcon/Crompton complete all as specified and directed
Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.
S&F in replacement of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Site-in-charge complete all as specified and directed.
S&F in replacement of switch piano flush type 5 Amps SP one way complete all as specified and directed
S&F in replacement of switch piano flush type 20 Amps SP one way complete all as specified and directed
S&F in replacement of socket outlet 3 pin 5A flush type complete all as specified and directed
S&F in replacement of socket outlet 2 in 1 3 pin 5 and 15 Amp flush type complete all as specified and directed
S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body. complete all as specified and directed
S&F in replacement of modular fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed
S&F in replacement of Modular socket 6 A 2/3 Pin 2 module, complete all as specified and directed
S&F in replacement of Modular socket 6A/16A - 2/3 Pin 2 Module, complete all as specified and directed
S&F in replacement of modular switch 1 way 10 A 1 module, complete all as specified and directed
S&F in replacement of modular switch 1 way 20 A 1 module with neon indicator, complete all as specified and directed
S&F in replacement for modular switch 2 way 10 A 1 module, complete all as specified and directed
S&F in replacement of 1 and 2 module Blanking plates, complete all as specified and directed
S&F in replacement of door bell AC 230 volts single phase ding dong type all as specified and directed
M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type ISI marked inclusive all accessories complete as specified and directed.
Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed
M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC Conduit ISI marked with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts
(b)Ditto as per item No 200 above but One 3 pin 6 Amps socket out let point on independent board.
(c)Ditto as per item No 200 above but One 3 pin 6 Amps socket out let point on same board.
(d)Ditto as per item No 200 above but One light point controlled by two 6 Amp two way switches .
M&L point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface,PVC Conduit ISI marked with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for 15 Amps socket outlet power point independent circuit complete all as specified and directed
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed
S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.
S&F in replacement LED security light fiitting 30 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed
S&F in replacement stator motor suitable for light duty fresh air ventilation fan of any sweep(approx 225/250mm) and replacing plywood of not less than 15mm with duly coated with synthetic enamel paint as per the existing arrangement.
M&L Sub main wiring with PVC insulated FRLS grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn through & including surface type PVC casing & caping of not less than 25 mm including drawn on wall/ceiling/through stair case/wooden surface with all accessories and incl cutting of existing surfaces of any type and making good to match with the existing surfaces acrylic sheet work after completion alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable :- 2 x 2.5 sq mm with one continuous earth wire of size 2.5 sq mm Note : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC casing/capping will be measured as one meter.
Ditto as per item no 209 above but 2 x 4 sq mm with one continuous earth wire of size 4.0 sq mm Note : 2 runs of 4 sq mm cable and one run of 4.0 sq mm earth wire and PVC casing/capping will be measured as one meter.
Ditto as per item no 209 above but 2 x 6 sq mm with one continuous earth wire of size 6.0 sq mm Note : 2 runs of 6 sq mm cable and one run of 6 sq mm earth wire and PVC casing/capping will be measured as one meter.
Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.
S&F 1x10W,230V, LED batten suitable for indoor application of color temperature 6000K surface /wall mounted LED batten including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed
S&F in replacement 1x20 watt,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.
S&F in replacement surface mounted LED Panel lights size of 600mm x 600MM x 35mm 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.
S&F in repalcement surface mounted LED Panel lights size of 1200mm x 300MM x 35mm 48 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.
S&F in replacement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed.
Sunil Constructions (BID ID -3085439)
S Y Itkar Construction and Company (BID ID -3087839)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .