Additional Improvement of Daily Market OuterShop Eletrical Work Back Side Fencing Work at SND road near New Bus Stand ward 18 survey no 3

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in lime mortar walls under 3m high

Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete

Supply And Fixing Chain Link - 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes) including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying, Fabrication, erection structural steel work for roofing welding or bolted type using MS channels, angles, plates and round bars etc. Conforming to IS specification including primer coating and enamal painting as per design given by departmental officers etc., complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanized iron sheets Gutter with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.

Plain Cement concrete 1:4:8 mix (One cement four sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicificat

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per st

Brick work in cement mortar 1:5 mix using (One cement and five crushed stone sand) using best quality of country second class ground moulded chamber burnt bricks of size (9"x4 3/8"x2 3/4") for foundation including curing cost and conveyance of all materia

Plastering with cement mortar 1:5 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:4 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting two coats with ready mixed plastic emulstion paint of first class quality paint and approved colour including priming coat through scrapping clean removal of dust etc., complete

Supply and fixing of Horizontal Three Phase Distribution Board with MCBS AC supply suitable for both lighting and Motor Circuits including cost of conveyance of all materials to working site and all labour charge etc, complete complying with STD specification. SD 164 4 ways Single phase DB

Wiring with 2 x 1.5 sqmm(22/0.3) PVC insulated single core unheated copper conductor cable of 1100V grade in suitable heavy gauge Pvc conduict pipe Open on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non-interlocking flush CS plug with continuous earthwire connection of 14 SWG TC wire for open plug point. (SD26)

Wiring with 2 x 2.5 sqmm(22/0.3) PVC insulated single core unheated copper conductor cable of 1100V grade in suitable heavy gauge Pvc conduict pipe Open on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 20 A 3 pin non-interlocking flush CS plug with continuous earthwire connection of 14 SWG TC wire for open plug point. (SD10)

Supply and installation of 4' 18W crystal Glass LED Tubelight fitting as per the approved Drawing.

Supply and run of 3 of 2.5 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 44)

Provision for 100 W LED Focus Light for Outer Passage Which includes all cost and Conveyance and Labour Charges etc,. Complete.

KSK CONSTRUCTIONS