MISC BR REPAIRS INCLUDING FLOORING, JOINERY, PLASTERING AND SANITARY FITTINGS FOR MD ACCN AT CHORD LINE AREA OF KANKINARA UNDER GE (N) KOLKATA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (450x300) x7mm thick in skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Material and labour for light shade vitrified tiles 7 to 8mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 of each tile in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for light shade vitrified tiles 7 to 8mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Supply and fix in repairs stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed.

Supply and fix in repairs stainless steel sink without drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 495 X 420 mm with bowl size 405x355x178mm or 410x330x160mm complete all as specified and as directed.

Supply and fix in repair stainless steel kitchen Plate Rack of size 24''x36''x10'' complete all as specified and as directed.

Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding edge and polishing complete all as specified and directed.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and 'P' or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian Type pedestal pan excluding flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix in repairs vitreous china wash hand basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain, plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Supply and fix in repair soap dish, stainless steel approximate size 160x100mm and fixed in position complete all as specified & directed.

Taking down chowkats or frames any type with single or double shutter (without taking off shutter from the frame) exc 1.50 and not exc. 4.00 Sqm in each complete all as specified and directed.

Taking down chowkats or frames any type with single or double shutter (without taking off shutter from the frame) n. exc 1.50 Sqm in each complete all as specified and directed.

Taking down shutters only of any description exe 1.0 sqm and n exe 2.0 Sqm each opening complete all as specified & directed.

Material and labour for 2nd class hardwood in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and as directed .

Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in block for fixing of hold fast and similar items complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (single panel) without lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed.

Supply & fix 100 mm long MS Butt hinge , medium weight , cold rolled complete all as specified and as directed .

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface exc 10 cm width or girth including preparation of the surface complete all as specified and as directed .

Supply and fix MS holdfast made up of FI, 25 x 3mm conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed.

Supply and fix 3 track sliding aluminium window with frame section size 92 mm x 31.75 mm x1.05 mm anodized 2 no glazed shutter for sliding window with aluminium channel section weighning not less than 0.55 Kg per Rm including 4 mm thick one side glass aluminium cleat,roller rubber neoprene packing/gusket etc and 1 no aluminium anodized wire mesh shutter for sliding window with aluminium channel section weighning not less than 0.55 Kg per Rm including stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm aluminium cleat, roller rubber neoprene packing/gusket complete all as specified and as directed.

Supply and fix 2 track sliding aluminium window with frame section size 61.85 mm x 31.75 mm x 1.00 mm anodized 2 no glazed shutter for sliding window with aluminium channel section weighning not less than 0.55 Kg per Rm including 4 mm thick one side glass aluminium cleat, roller rubber neoprene packing/gusket etc complete all as specified and as directed.

Supply and fix aluminium louver with frame section size 63.5 mm x 38.10 mm x 0.92 mm anodized with 2 no movable blade with section weighning not less than 0.55 Kg per Rm including 4 mm thick foggy glass aluminium cleat,roller rubber neoprene packing/gusket etc complete all as specified and as directed.

Supply and fix aluminium designed grill for windows including jointing cleat for fixing etc complete all as specified and as directed.

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete all as specified and as directed.

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and as directed.

Supply and fix in repair Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix factory made PVC Cup board frame of size 75 mmX40 mm with a wall thickness of 5 mm , made out of extruded 5 mm thick plain colour PVC Sheet reinforced with 15mm X15mm MS square tube of 19 gauge thickness throughout the frame and mitred cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmX10mm MS square tubes . The door frame shall be fixed to the wall using 65/100 mm long MS screws through the frame by using PVC fastners . A minimum of 4 Nos of screws to be provided for each vertical member and minimum of 2 Nos of screws to be provided to horizontal member , prelam colour complete all as specified and as directed.

Supply and fix factory made PVC Cup board shutter of 25 mm thick consisting of frame madeout of MS tubes of 19 gauge thicknessof size 15 mmX15 mm covered with 5 mm thick PVC 'C' channel of size 25 mm X 50 mm forming stiles , top and bottom rails . Panelling of 5 mm thick plain colour PVC sheet fitted in the MS frame welded / sealed to the stiles and rails with 25 mm wide X 5 mm thick PVC sheet beading on either side and joined togather with solvent cement adhesive . An additional 5 mm thick PVC Strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc . prelam colour complete all as specified and directed.

Supply and fix in repairs factory made PVC centre partition and shelf of 15 mm thick consisting 15 mm (5 mm X 3) 19 mm square tube, plain in colour complete all as manufacturers instructions complete all as specified and directed.

Supply and fix in repair fancy type drapery curtain rod bracket as specified and as directed.

Supply and fix in repair brass chromium plated curtain rods of 20mm dia complete all as specified and directed.

Supply and fix in repairs 15mm bore bib tap fancy type chromium plated cast copper alloy with crutch or butter fly handle complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap standard of PTMT any colour high pressure for iron pipe and fixed (minimum weight 15 mm - 105 gm) complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, PTMT any colour high pressure with long shank and cup, concealed type (minimum weight 15 mm- 110 gm) with long shank and cup concealed type complete all as specified and as directed.

Supply and fix in repair shower rose 125 mm size brass chromium plated, with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair stop cock 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair bib tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repair UPVC pipes 110 mm bore type 'A' single socketed in any length with rubber ring joint fixed to walls with and including PVC brackets complete all as specified & directed.

Supply and fix in repair UPVC bend/shoe 110mm bore complete all as specified and as directed.

Supply and fix health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc after taking up or down 15mm dia old steel tubing & connection complete as specified and directed.

Supply and fix steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc after taking up or down 20mm dia old steel tubing & connection complete as specified and directed.

Supply and fix 500 litres capacity rotational moulded polythene water storage tanks multilayer (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling of unserviceable water tanks and removing from site complete all as specified and directed.

Supply and fix 1000 litres capacity rotational moulded polythene water storage tanks multilayer (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling of unserviceable water tanks and removing from site complete all as specified and directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen (1 part of bitumen to be mixed with 3 part of sand) and finished the surface fair and even complete all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings nexc 15 cm thick (below or above ground level) complete all as specified and directed.

Material and Labour for preparation of old steel surface and applying one coat of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.

Material and labour for cleaning and removing all scale, dirt and fungus etc. from tanks and mouth of circulating pipes, with suitable cleaning chemical and brushing the wall and bottom of tanks, washing with clean water, writing letter i.e. "TANK CLEANED ON ......................(Date)" not exc. 100mm height with synthetic enamel paint for tanks of capacity 500 ltrs to 1000 ltrs complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting/Galvalume sheeting any gauge , thickness , including roof covering / wall etc for the building structures complete all as specified and as directed .

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in Ridge, fixed with self tapping screwscomplete all as specified & directed.

Materials and Labour for hollow steel sections for structural use, designation CF, in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Circular,Square, Rectangular Hollow Sections), including distance pieces, cleats, angle iron,plate etc welding as required,including dismantling old unserviceable structural works complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fix in repair grating doom 100mm dia of SS (Minimum weight 25 gms) complete all as specified and as directed.

M&L for Hardcore of gauge n exc 63mm broken bricks, deposited, spread and levelled in layers n exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick plain cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) and finished the surface even and fair including demolition of old PCC complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, laid over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors including demolition of old unserviceable tiles complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine , applying wall care putty 1 mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall by Vacuum based sanding machine and applying two coats of emulsion distemper, white or coloured by Auto Roller over a coat of primer complete all as specified and as directed as per manufacturers instruction.

Material and Labour for preparation of surface and applying one coat of synthetic enamel paint on old steel surface exc 10 cm width or girth complete all as specified and as directed .

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

S M ENTERPRISE (BID ID -3304892)

SHIVAM ENTERPRISE (BID ID -3304938)

ALOKE ENGINEERING AND COMPANY (BID ID -3305166)

DSL ENGINEERING & CONSTRUCTION (BID ID -3301874)

CHOWDHURY SMALL INDUSTRIES (BID ID -3305359)

Friends Trading Co (BID ID -3300824)

J.S. Construction (BID ID -3304962)