Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹47.8 LAdmitted-Finance ZIRAKPUR PUNJAB | -0.50% | ₹47.8 L | L1 | Admitted-Finance |
Tender Value
₹48.1 L
EMD Value
₹96,133
Closing Date
5 May 2026, 11:00 amClosed
EXECUTIVE ENGINEER
SCO NO 35 SECOND FLOOR SECTOR 17E CHANDIGARH
Supply Installation Testing and Commissioning of Street Light from DC office Mohali to JLPL Sector 94 Road SAS Nagar Mohali
2026_CEPW_166147_2
TENDER NOTICE NO 01
Open Tender
Electrical Works
EXECUTIVE ENGINEER ELECTRICAL DIVISION CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
Yes
₹96,133
Yes
3 Jun 2026
27 Apr 2026
5 May 2026
27 Apr 2026
5 May 2026
27 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 13-STEPPED STEEL TUBULAR POLE (WITH PRE-CAST FOUNDATION):Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length confirming to IS: 2713- (PART-II)-1980 (Steel tubes confirming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix on precast RCC column of suitable dimensions. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The steel tubular pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level including painting of pole with two coats of approved aluminium paint as required:- | ||||||
| 1.01 | Overall length 9 metre, length of sections 5 metre, 2 metre and 2metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 165.1mm x 4.85mm, 139.7mm x 4.5mm and 114.3mm x 3.65mm (Bottom, Middle and Top respectively) with approximate weight 154 kg. (410 SP-32), Foundation size below G/L 600mm x 600mm x 1700mm, 4Nos. Foundation Bolts size 24mm dia., Length≥750mm with Base Plate Dimensions 275mm x 275mm x 16mm Thick | 96 | Nos | 29,913.08 | ₹28,71,655.68 | BI01010001010000000000000515BI0100001119 |
| 2TIMER:S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:- | ||||||
| 2.01 | Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3 Nos. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) | 2 | Each | 15,361.08 | ₹30,722.16 | BI01010001010000000000000515BI0100001121 |
| 3G.I. EARTHING:Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- | ||||||
| 3.01 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) | 96 | Each | 1,274.74 | ₹1,22,375.04 | BI01010001010000000000000515BI0100001123 |
| 4DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- | ||||||
| 4.01 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) | 2,500 | Mtr | 133.79 | ₹3,34,475 | BI01010001010000000000000515BI0100001125 |
| 5XLPE INSULATED UN-ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- | ||||||
| 5.01 | Overall size 16sq.mm (4Core) Un-armoured (Loose) | 2,900 | Mtr | 200.17 | ₹5,80,493 | BI01010001010000000000000515BI0100001127 |
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
SBD.pdf
Tender Documents • 21.88 MB
BOQ_339264.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid