Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.2 L+₹69,225 (9.26%)Rejected-Finance | L2 | Rejected-Finance EMD Rejected | |
| 3 | L3₹8.5 L+₹1.0 L (13.6%)Rejected-Finance | L3 | Rejected-Finance EMD Rejected | |
| 4 | L4₹8.8 L+₹1.3 L (17.2%)Rejected-Finance | L4 | Rejected-Finance EMD Rejected | |
| 5 | L5₹8.8 L+₹1.3 L (18.0%)Rejected-Finance | L5 | Rejected-Finance EMD Rejected |
Tender Value
₹10.2 L
EMD Value
₹21,100
Closing Date
28 Oct 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Atul Bhardwaj
Hauz Khas
Provision of lighting arrangement in park at near B-5,139 in Ward No.61S (Safdarjung Enclave) under South Zone.
2022_SDMC_132961_2
EEE/SZ/2022-23/31
Open Tender
Electrical Works
Works
60 days
South Zone
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹21,100
12 Oct 2023
21 Oct 2022
28 Oct 2022
21 Oct 2022
28 Oct 2022
21 Oct 2022
Amount
Laying and Jointing PVC Pipe. Heading
SITC of 8 to 10W LED cone type bollard light made up of pressure die cast powder coated housing with polycarbonate diffuser,high efficiency long life,surge voltage protection,open circuit,short circuit protection and other safety test as per IS 15885 part 2 etc as required
P &F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS 649/1990 etc as required (a) 3x2.5 sqmm
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Supplying and laying of following size of CPVC pipe in along with all accessories like socket,bend,couplers etc. confirming to IS 4985;2000 part II complete with fitting and cutting ,jointing etc. direct in ground (50cm below ground level) including excavtion and refilling the trench but excluding sand cushioning and protective covering etc complete as reqired.25mm dia
SITC Of Pillar box size 900mm X 450mm X 250mm suitable for mounting incomer of 250A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of size 2.5mm X 10mm mounted on galvanized MS Body power quoted pilferage proof SMC door duly welded with S.S. with rain com size 40mmX40mmX5mmX600mm height in cutting 300mm height below grand and covered with shode proof SMC Sheet of 3mm as required
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63A
Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, rewinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos.and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with supplying and positioning of 4 nos foundation bolts of size 16mm dia and 600 mm long,J type i/c 2 nos. template anchor plates of size 225x225x3 mm and providing DCW HDPE for cable entry and exit as required for 3m and 5 mtr pole.
Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full verticle window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB ‘C’ characteristics, earth stud, cable support clamp suitable for 4x25 sqmm cable.Logo/Name of manufacturer shall be embossed on the pole.Galvanization as per relevant IS.(a)5.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick.
Fabrication ,supplying,installation,testing,commissionng of 12mtrs high mast system with its accessories,mast shaft shall be in one section hot dip galvanized 4mm thick(single dip) inside and out sides and suitable for wind velocity as per IS875 part 3.There shall be in longitudinal seam weld per section and no circufernal weld.It should also included accessories for high mast head frame 2 point suspension system with steel wire rope 5mm dia(7/19 constructions) single drum switch,galvanized lantern carriage arrangement suitable for 4/6 nos flood light luminaries symmetrically and its coontrol gears boxes and ligghting finila the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering opertion and foundation bolts and anchor plate and control panel hosuing suitable RCC(1:2;4) shallow foundation of size 1m(L)x1m(w)x2m deep i/c excavation of earth ,providing cutting bending and placing in position ,reinforcement of cold twisted bars of 12mm dia-2100mm long(approx.-16 nos and reinforcement of cold twisted bars of 8mm dia-3700mm(approx)-13 nos(with 150mm sapcing) as required with postioning of 4nos foundation bolts and proviiding DWC HDPE pipe for cable enrty & exit as required for high mast considering the safe soli bearing ca[pcity at site as 10T/sqm at 2mtr depth with all material i/c 4 nos SP MCB,63Amp DP isolator etc as reqd.Logo/Name of manfacturer shall be embossed on the pole galvanized as per relevant IS
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3x2.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size in the existing masonry open duct as required. Upto 35 sq. mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable Conforming to IS 7098/1988 of following Sizes (a) 2 X6 SQmm
Fabrication supplyiing and fixing B-class Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap 1000mm long 32 mm dia galvanized pipe with tightening bolts complete as reqd.
Providing and fixing FRP fencing at Electrical insatalltion with necessary concreting for ground vertitcal post,hardware,accessories,fittings etc of 2000mm height above ground and 300mm grounding in ground minimum along with fencing 1 no of FRP gate with necessary hardware,accessories,brass/stainless steel metal lock fittings etc of suitable lenghth width & height i.e. number gate as per site requirement.
Providing and fixing of stainless steel name plate of size 6x8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required
SHRIRAM SHARMA
The Electrician
SETH CONSTRUCTIONS
A.J ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .