Construction of shed for RO plant installed for cow pant in Nandi Park situated at Rajnagar Extension Road and work of removing damaged plaster of 02 old sheds situated at Nandi Park and doing plastering of them and fitting of centrifugal fittings et

Dismantling existing plaster includingdisposal of refuse as directed by theEngineer-in-charge within adistance of 60metre (200 feet).

Disposal of refused material/malba distance up to 8 KM etc all complete as the direction of Engineer-in-charge (As per PWD SOR 2022 si no 231(a)

S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 ( a).

Painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface i/c supply of all materials,labour,tools & plants etc. required for proper completion of the work.paint to be used should confirm ISI no. 105/106/133-1950. for tow coat

Steel work in built up tubular (round, square or rectengular hollow tubes etc)trusses etc. inciuding cutting, hoisting,fixing in position and applying and priming coat of approved steel primer i/c welding and bolted with special shaped washers etc complete.Hot finished welded type tubes DSR 2022,code-10.16.1

Supply and fixing Galvanized corrugated iron roofing in position including supply of all materials, labour,Tools & plants etc.required for prpper completion of the work and including wastage.1.00 MM thick

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR Item No.-17.40

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32mm dia

P/F Exhaust fan size 30cm

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonicwater closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. DSR 2023,Code-17.81

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.5 White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.. DSR No. 17.71

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore DSR 2023,code- 18.53.1

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore DSR 2023 ,code-18.21.2.1

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement:4 coarse sand),furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 2 kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in-charge for providing grooves shall be made separately) DSR 2023,13.72