Construction of Carp Brood Bank at Fish farm Nalagarh, Distt Solan HP. SH Construction of Carp Hatchery including RCC Spawning pool 5m Dia.,Incubation pool 3m Dia.,Egg Collection Chamber 3x2x1.2m, RCC Seed conditioning tanks, Packing Shed,

Amount

Construction of Carp Brood Bank at Fish farm Nalagarh , Distt Solan (HP). ) (SH:- Construction of Carp Hatchery including RCC Spawning pool (5m Dia. ) ,Incubation pool (3m Dia.),Egg Collection Chamber 3x2x1.2m, RCC Seed conditioning tanks, Packing Shed,)

Excavation in foundation trenches etc in earth work in all kinds of soil , such as pick work, pick jumper work, jumper work , jumper blasting work, chiseling / wedging out rocks including pumping or bailing out water upto all lifts, stacking the excavated soil in all leads from the edge of excavation and then returning the stacked soil in 15 cm (fifteen centimetres) layers when required in to plinth side of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-In -Charge, including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.Any loss to the public and private property during the course of execution and disposal of unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respects in all cases as per direction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement,:1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size)Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars (Tata , Jindal Make ) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Boulder filling dry hand packed tightly as in wire crate apron bund / Soling (wire crates to be measured separately) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Tata , Jindal Make ) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals. including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

P/F partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately.Cement bonded particle board.6 mm thick including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing &finishing the top smooth including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.150 mm dia. Mm including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (Asian,Dulux ,Berger ,Nerolac Indigo Paints.) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore Medium Grade including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.150 mm dia. mm. including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls Under 20 cm wide including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Supplying and stacking at site. 63 mm to 45 mm size stone aggregate including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Supplying and stacking at site. 53 mm to 22.4 mm size stone aggregate including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals. including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm including carriage of material with in all leads and lifts in all heights as directed by the Engineer-in-Charge and other incidentals.

DHEERAJ GAUTAM (BID ID -516414)

Ravi Kumar (BID ID -516317)