REPAIR / MAINT OF VOLTAGE STABILIZER/ CONTROL PANEL WITH ALLIED MISC WORK UNDER AGE(I) AF MANAURI

Amount

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide n not exceeding 1.5 Mtr in depth for foundation etc or for shaft well, cesspits, manholes, Pire hole etc not exc 10sqmm on plan and not exceeding 1.5 Mtr in depth and getting out.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 CM complete all as specified and directed.

Removing excavated material not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point.

M&L for sand cushioning (dry sand) to underground cable for cable protection all as specified and directed. Note : Punned thickness of sand layer shall be measured and paid.

M&L for brick, old sub class 'B' well burnt, laid dry flat in trenches for protection of cable over LT cable, complete all as specified and directed.

Cutting /boring to plinth protection/ hard standing / road etc in suitable depth to across the GI pipe size upto 80 MM dia of bore for drawn through XLPE underground cable for giving mechanical protection to cable complete all as directed. Note ; Quoted rate shall be included the cost of required material for repairing to disturbed surface all as per existed.

Supply and fixing galvainesd water tubing light grade 40 mm dia of bore with fix with pole/ surface of wall / laid in trench etc as site using 02 Nos clamp made out by GI strip in size 25x4 mm with nut bolt and washer etc all as directed. Make : Jindal / Tata / Swastik

All as above item No 7 but in size 50 MM dia of bore

Supply, laid in trench/ floor/ plinth fix with surface of wall/ pole , connecting testing , thimbling and gland using suitable size aluminum conductor to XLPE insulated armoured heavy duty aluminium conductor power cable 1100 Volt grade cross-sectional area 4 core x 6 Sqmm (earthed) complete with other required site work inculding taking down/ dismantling of old existing cable & as directed.

All as per item No 9 above but size 2 core X 16 Sqmm (earhted)

All as per item No 9 above but size 4 core x 25 Sqmm (earthed)

All as per item No 9 above but size 4 Core X 35 Sqmm (earthed)

De-hydration and filtration to transformer oil by oil testing machine upto specific di-electric value as per IE rule and IS at site of Servo control voltage stabilizer in any capacity/ make/ model etc all including re-filling upto indicating level, cutting welding opening bolting to top cover of stabilizer with re-assembling and making connection in all as per existed complete as directed. Note : (i) Testing report in two copy shall be submitted by contractor in this office and required oil for re-filling shall be measured and paid against respective items.

Supply and re-filling as new transformer oil having specific Di- electric strength as per IE not less than 60 MV supplying in sealed container complete. Make : Silicone / Nexton / MEI

M&L for re-winding to burn out linear coil of copper strip heavy cross sectional area OR eg, roller rolling synchronous motor coils of fully automatic servo control voltage stabilizer capacity 100 /125 KVA using super enameled copper wire in conventional design with 4- QPC paper layer cover resist, grade 4 lamination with thickness 0.23 mm to 27 mm on minimum load losses , better insulation electrolytic grade copper strip having current density 2 to 2.5 Amps/ mm2 in oil , for actual efficiency in running condition at 100% load for 360 to 460 volts , losses difference 1/18th of the conventional type regulator of with insulating material in same gauge copper purity, no of turns in coil with varnishing, heating, testing etc with all other site work required to make the transformer serviceable and fixing / replacing to following spares :- Note : Contractor shall inform to Deptt for inspection/ check burn out coil before re-winding. Make - As per sample

Supply and fixing in replacement to roller wheel in existed specification round roller ball type of voltage stabilizer capacity upto 125 KVA oil cooled in all make/ model etc used for surfacing movement with locking pin and cutting welding etc all as site required work complete all as directed.

Supply and fixing hand operated handle made out by cast iron in existed make / model etc with locking arrangement complete all as directed

M&L for erection in position of true vertical swaged tubular pole type 410 SP-31 [09 Mtrs long] complete with cast iron base plate, finial taper plug, bolts, nuts and screws and top cover complete including taking out old pole any type from ground and making good disturbed surface complete all as specified & directed including following:- Contd.....

Contd..... [a] Excavation in trenches not exceeding 1.5 M wide & 2 M deep for pole foundation & getting out soft loose soil, returning filling soil in the trenches after fixing of pole in foundation ramming earth around the layers not exceeding 25 CM thick and disposal of surplus soil to a distance not exceeding 50 M. [b] M&L providing PCC 1:4:8 type D-2 using 40 MM graded stone aggregate as in foundation 600 MM x 600 MM cross section planting depth 1.8 M for concrete casing the pole up to ground level. [c] M&L providing PCC 1:3:6 type C-2 using 40 MM graded stone aggregate as in plinth band/ collar 300 MM high from ground level & 450 MM dia. [d] M&L painting of pole on external surface with one coat of black bituminous paint [up to planting depth] and above plinth band/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of steel surface and painting with synthetic enamel paint blue colour, circular band three number of 30 CM wide in alternate layer up to height of 1.5 M above plinth band of pole. [e] Material & labour writing letter or figures/ pole number [Block, Roman, Italic as Indian] with thick synthetic enamel paint of approved shade not exceeding 30 CM. Note: Old dismantled portion of LT poles in grounds shall be filled with PCC (1:5:10) type E-2 using 40 MM graded stone aggregate. Cost of PCC filling shall be deemed included in qouted unit rate

S&F in replacement of security light bracket made out by GI pipe light grade 40 mm dia in 1.2 Mtr long and bend in 120 degree bracing by 02 Nos clamp made out by GI strip 25x4 mm with nut bolts and washers incl painting in two coats over one coat of red oxide primer complete all as directed.

Supply in replacement of shock proof, fire retardant rust proof, outdoor pole kiosk control box of size 310 x 210 x120 mm made out of one piece Engineer plastic moulding of Siemens grey colour comprising 4 Nos aluminium bus bar 200 Amp rating fitted on DMC unbreakable insulator including clamps for fixing arrangement complete all as specified and directed. Make: Sintex /Universal/ SMC

Supply fixing in replacement of 45 watt LED street light fitting energy saving IP 65 protection including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Make : Bajaj Cat No BRTFG 45W LED I ( EDGE) or equivalent model of make in Philips/ Wipro

Supply fixing in replacement of 60 watt LED street light fitting energy saving IP 65 protection including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Make : Bajaj Cat No BRTFG 60W LED V3 (EDGE) or equivalent model of make in Philips/ Wipro

M&L for painting to steel prepared surfaces of any width or girth not otherwise described by using synthetic enamel paint in two coats (one as finishing coat) over one coat of red oxide zinc chrome primer on surface of steel structure /girder/ angle frame / wire mesh fencing (both side) / installation board / gate etc in any description at E/M installation using paint spray gun on specified working pressure including sign making /marking with using different colour in given size of letter etc complete all as specified and directed. Note- Paint colour & shade including writing marking of letters etc shall be deemed included in quoted unit rate and the same shall be approved by Deptt.

Supply & fixing in replacement of 200 watt LED out door high mast light fitting for replacing to high mask lights fixed with tower / pole in any length/ specification ,energy saving IP 65 protection ,required nut bolt washer etc including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Note ; Quoted rate shall be included cost to take down/ up, replacing of inter connection cable etc and other required site work. Make : Bajaj Cat BARFEG 200W( Turbo) or equivalent model of make in Philips/ Wipro

M&L for advance maintenance free chemical earthing with JMV CBE 403 environment friendly ring earthing system consisting each set of 03 (three) Nos of 10 (ten) feet length 40 mm dia earth electrode made out by copper, maintenance free electrolytic grade copper earthing system of JMV make based on flat in pipe technology of 3 Mtrs length, 40 mm dia with crystalite conductive mixture COMPOUND filled with the permanent sealing at the top & bottom with the lead terminal / strip in 25x4 mm size copper with 2 holes of 10 mm dia at the top , to be lowered in 150 mm dia bore including filling of back fill ecofriendly earth enhancing compound tested by ROHS comply to IEC 62651-7 which should have passed leaching ,corrosion, supphur & resistivity test as per IEC 62651-7 by NABL accredit LAB/JAM plus compound in 150 mm bore in immediate contract around the earth electrode and top of the bore shall be finished with 40 mm thick PCC in 1:2:4 type B 1 over 75 mm thick PCC in 1:4:8 type D-2 and back filly/ JAM compound shall be covered with FRP pit cover of suitable size for each earth electrode , joint to be made by JAM weld exothermically welded technology including copper strip size 50 x 6 mm for earthing ring system and copper strip 32x6 mm size for earthing electrode to test point with saddles & porcelain insulators suitable size on wall ,earth strip protected by light grade GI pipe 40 mm dia in case of plinth protection / floor/ hard standing crossing complete all as specified and directed. Make - JMV LPS Limited / JEF/ ALCOICE / Conducrete Note :- Earth work , PCC work, PCC cutting work by cutter, earth chamber in suitable size with testing on suitable value etc rate shall deemed to be included in quoted rate.

M&L for copper strip 32 x6 mm with saddles and fixing screws etc for roof conductors above ground level all as specified and directed.

Supply, fixing, connecting testing as new to Industrial automatic transfer switch with Controller 4 pole TPN 415 volts 200 Amps rated sheet metal enclosure to be fix in outdoor LT panel conform to IS/ IEC 60947-6-1 , AC- 31 A, 50 Hzs automatic / manual with complete protection making all connection including fixing nut bolt operating handle etc all accessories all as specified and directed. Make : Havells Model IHYFCDE200 or equivalent in L&T / Legrand

Supply & connecting in replacement of acid lead maintenance free GP 115E31L type 12 volt 180 Ah heavy duty Generator set battery suitable for giving start backup to 125 KVA DG set initial charged with connecting copper multicore lead/ cable PVC insulated 1.5 Mtr long one end fixed heavy duty copper terminal and other copper lugs with 36 months warranty minimum complete. Make: Exide Model Xpress or equivalent model of make as specified in Appendix ‘B’ to particular specifications.

Supply & connecting in replacement of acid lead maintenance free GP 115E31L type 12 volt 100 Ah heavy duty Generator set battery suitable for giving start backup to 75 KVA DG set initial charged with connecting copper multicore lead/ cable PVC insulated 1.5 Mtr long one end fixed heavy duty copper terminal and other copper lugs with 36 months warranty minimum complete. Make: Exide Model Xpress or equivalent model of make as specified in Appendix ‘B’ to particular specifications.

Supply only for re-filling to distil water in specific value for re-filling in sealed container to existing battery.

S&F in replacement MCCB, 4 pole, 63 Amp rating having breaking capacity of 16 KA at 415V adjustable thermal process based magnetic setting type Ics=75% Icu complete all as specified aid directed Make: Legrand Cat part No 420003 or equivalent in Siemens / L&T

All as per item No 31 above but 4 pole 415 Amps 125 Amps capacity 16 KA. Make: Legrand Cat part No 420016 or equivalent in Siemens / L&T

S&F in replacement MCCB, 4 pole, 250 Amp rating having breaking capacity of 36 KA at 415V adjustable thermal process based magnetic setting type Ics=75% Icu complete all as specified and directed. Make: Legrand Cat part No 420249 or equivalent in Siemens / L&T

S&F in replacement room heater blow hot air fan for using MES installation single phase confirming to IS : 302-2-30, 2007 latest ISI mark heating element 1500 W steel body heavy duty with inter connection copper cable etc complete all as directed. Make:-Bajaj model SM 2 Cat No 5116877-61749229890 or equivalent in Phillips/ Havells

Supply in replacement LED rechargeable LED torch 10 W SOS for using MES installation with one year warranty for lead acid battery and connecting cable complete. Make:- GENERIC cat No RST STR 010xCxRLN4N or equivalent in Bajaj/ Phillips/ Havells

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

M/S VIJAY SINGH

M/S R S Traders

Avion Industries