REPAIRS AND RE-PAINTING OF STEEL FURNITURE AT UNIT LINES, MD ACCN AND FURNITURE YARD OF BSO (SOUTH) UNDER GE (SOUTH) BANGALORE

Amount

ALMIRAH LARGE STEEL: (Drg No. FD- 1031) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drg and all as specified and directed.

ALMIRAH SMALL STEEL: (Drg No. FD- 1032) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drg and all as specified and directed.

ALMIRAH LARGE STEEL/SMALL STEEL (Applicable to items Nos 03 to 11): (Drg No. FD-1031, FD-1032 & FD-67) Removing the existing unserviceable lock and supply and fix new lock of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel complete as shown on drg and all as specified and directed. Make: Link/Harrison Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/medium steel complete as shown on drg and all as specified and directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides for almirah large/medium steel complete as shown on drg and all as specified and directed. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete as shown on drg and all as specified and directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah medium steel of Size 760mm x 440mm x 1270 mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah complete as shown on drg and all as specified and directed.

TEAPOY VERANDAH (Applicable to items Nos 12 to 13): (Drg No. FD-255 & FD-383) Removing the existing unserviceable top and supply and fix new top of size 900x450mmx18mm thick pre-laminated particle board of white colour with 3mm thick teak wood edging alround as directed, including painting the under side of table top with two coats of synthetic enamel paint (white) over a coat of red oxide primer complete as shown on drg and all as specified and directed.

Supply and fix new hard rubber toes of appropriate size suitable to Teapoy verandah complete as shown on drg and all as specified and directed.

TABLE WITHOUT DRAWER FOR HAVs & ORs STEEL 900 X 600 X 760MM (Applicable to items Nos 14 to 16): (Drg No. FD-1007) Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table complete as shown on drg and all as specified and directed.

Material and labour for preparing old steel surfaces of steel frame of table 900x600x760 mm with one coat of synthetic enamel paint complete as shown on drg and all as specified and directed.

LOCKER STEEL (BUILT IN) (Applicable to items Nos 17 to 21): (Drg No. FD-1029) Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged hanging rod and supply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged handle and supply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel complete as shown on drg and all as specified and directed.

TABLE OFFICERS STEEL (Applicable to items Nos 22 to 24): (Drg No. FD-1002) Material and labour for cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint to achieve a uniform finish and to fix rubber toe for legs complete as shown on drg and all as specified and directed.

Removing the existing unserviceable drawers of table office officer steel and supply and fix drawer made out of MS sheet CRC 1mm thick bent to shape to its original position and applying two coat of synthetic enamel paint over a coat of red oxide primer complete as shown on drg and all as specified and directed.

Removing the existing unserviceable top and supply and fix 18 mm thick particle board commercial exterior grade pasted with 1.5mm thick plastic laminated sheet fixed on top complete as shown on drg and all as specified and directed.

CHAIR TUBULAR STEEL WITH /WITHOUT ARMS (Applicable to items Nos 25 to 31): (Drg No. FD-75) Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms complete as shown on drg and all as specified and directed.

Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms and supply and fix new seats of size 480mmx450x25mmx4 made out of teak wood frame with half round beading at edges complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged back from chair tublular steel with/without arms and supply and fix new back of size 480mmx45mmx25mmx4 made out of teak wood frame complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of size 380mmx50mmx25mmx2 with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair complete as shown on drg and all as specified and directed.

Removing the existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg.

BOOK CASE STEEL (Applicable to items Nos 32 to 35): (Drg No. FD-1028) Removing the existing unserviceable handle and supply and fix new steel handle 100 mm long to book case steel complete as shown on drg and all as specified and directed.

Removing the existing unserviceable lock and supply and fix new lock with duplicate keys complete as shown on drg and all as specified and directed. (Make : Godrej or equivalent as approved by GE.)

Removing the existing unserviceable glass of shutters and supply and fix new glass to book case steel complete as shown on drg and all as specified and directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to all external and internal surfaces of book case steel complete as shown on drg and all as specified and directed.

BOOKSHELF OPEN LARGE STEEL: (Drg No. FD-69) Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint grey/olive green on all external surfaces complete as shown on drg and all as specified and directed.

ALMIRAH LARGE STEEL 1/2 Hanging X 1/2 Shelving (Applicable to items Nos 37 to 41): (Drg No. FD-1033) Removing the existing unserviceable three way locking device and supply & fix three way locking device with cover for almirah large steel complete as shown on drg and all as specified and directed.

Removing the existing unserviceable lock and supply & fix new steel lock 6 levers with duplicate keys chromium plated as suitable to almirah complete as shown on drg and all as specified and directed. (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.

Removing the existing unserviceable handle and supply & fix new chromium plated steel handle 125mm long to almirah large/medium steel complete as shown on drg and all as specified and directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides complete as shown on drg and all as specified and directed. Note :- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint to all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) and to fix 3mm hard rubber pad in the bottom of legs complete as shown on drg and all as specified and directed.

Charpoy MS Square NCOs: (Drg No. FD/MAP II/01) Removing the existing plywood from charpoy MS Square NCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood charpoy MS Square etc complete as shown on drg and all as specified and directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

Charpoy MS Square JCOs: (Drg No. FD-CECZ/TD/726) Removing the existing plywood from charpoy MS Square JCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the new plywood to the charpoy MS square etc complete as shown on drg and all as specified and directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

BED HARD TOP MS SQUARE FOR OFFRS (Applicable to items Nos 44 to 45): (Drg No. FD/E6/MAP/08) Removing the existing plywood from charpoy MS square Offrs and preperation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood on charpoy MS Square etc complete as shown on drg and all as specified and directed. Note: New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule.

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer complete as shown on drg and all as specified and directed. Note : The size of plywood mentioned in item Nos 45 is suitable to the items Nos 42, 43 & 44 for fixing only.

RACK STEEL SIX TIER Dismantling and taking out the old unserviceable/damaged shelf of Rack steel six tier and supply and fixing of new shelf made out of MS sheet 1mm thick bent to shape and fixing the same properly in position all as per Drg including applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of red oxide primer after necessary preparation of surface complete as shown on drg and all as specified and directed.

REENA INDUSTRIES

Vivek Engineers

Global Furnisherts