76/2024-25/

Amount

Safe Carriage of following Material from Elec. Store Center Barabanki to work site along with loading, unloading and propoer stocking.

STP Pole 11 Mtr. Long

11 KV XPLE Cable 3x120 sq.mm.

11 KV XPLE Cable Jointing Kit Indoor/Outdoor 3x120 sq.mm.

ACSR Weasel Conductor

Transformer 400KVA

Sub Station Base Angle

11 KV VCB for OG (CTR 200/100/5A)

Do Fuse Set

11 KV Top Channel

Earthing Rod

Dropper Channel

11 KV Pilfer proof Metering Cubical 25/5A

11 KV CT/PT Metering Pole Mounted Unit 25/5A

Dragging of Pole from dump site to work site

Erection of D/P following type HT Lines including all associated work with joint/jumpers and binding of insulator with complete all work as required.

Laying of 11 KV 3-phase line stringing and sagging of ACSR Weasel conductor including all associated works and making clearance of road with joints/jumpers and binding of insulator as required.

Earthing of pole as per RESPO Norms.

Installation of 11 KV VCB O/G, CTR 200/100/5A at Site.

Installation of Metering Cubical With CT/PT unit and Proper connection as per required at Site.

Testing of 11 KV VCB O/G, CTR 200/100/5A at Site.

Fixing of cable Jointing kit of 3x120 sq mm

Mounting of 400 KVA Transformer.

Providing and Fixing all types of following materials.

Grouting of ST Pole as per RESPO Norms with grouting materials.

All Type Clamps including fabrication & fitting of accessories.

GI Pipe 6 dia

Nut & Bolt

Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor).

Construction of retaining wall, fabrication & erection of Wiremesh fencing around Transformer with retaining wall & 01 nos. gate with locking arrangement made of MS Angle Iron of size 50x50x6 mm jointed with nuts and bolts. Wiremesh of size 10 swg rectangle type, its painting as per norms of RESPO. (All the materials will be arrangement by the contractor)

Earthing of Neutral of Transformer, Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor)

Earthing of Neutral of 11 KV VCB O/G, CTR 200/100/5A, and 11 KV Pilfer proof Metering Cubical 25/5A Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which All neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor)

Laying of 11 KV XLPE Cable 3x120 sq mm Double Ckt. in U/G with trench

LAL BAHADUR CONTRACTOR (BID ID -4731374)

M/s R.L.ENGINEERING (BID ID -4731542)